TuxMonkey/bf_original_balance_chassis
1
0
Fork 0
mirror of https://gitee.com/dlmu-cone/bf_original_balance_chassis synced 2026-07-23 19:25:09 +08:00
Code Issues Packages Projects Releases Wiki Activity

balance init

Browse Source
This commit is contained in:
kai
2024-01-14 21:22:34 +08:00
parent 9dd0057563
commit 6f22c0ac30
20 changed files with 395 additions and 1056 deletions
Download Patch File Download Diff File Expand all files Collapse all files

333
application/cmd/robot_cmd.c
View File

@@ -13,345 +13,14 @@
#include "bsp_dwt.h"
#include "bsp_log.h"
// 私有宏,自动将编码器转换成角度值
#define YAW_ALIGN_ANGLE (YAW_CHASSIS_ALIGN_ECD * ECD_ANGLE_COEF_DJI) // 对齐时的角度,0-360
#define PTICH_HORIZON_ANGLE (PITCH_HORIZON_ECD * ECD_ANGLE_COEF_DJI) // pitch水平时电机的角度,0-360
/* cmd应用包含的模块实例指针和交互信息存储*/
#ifdef GIMBAL_BOARD // 对双板的兼容,条件编译
#include "can_comm.h"
static CANCommInstance *cmd_can_comm; // 双板通信
#endif
#ifdef ONE_BOARD
static Publisher_t *chassis_cmd_pub; // 底盘控制消息发布者
static Subscriber_t *chassis_feed_sub; // 底盘反馈信息订阅者
#endif // ONE_BOARD
static Chassis_Ctrl_Cmd_s chassis_cmd_send; // 发送给底盘应用的信息,包括控制信息和UI绘制相关
static Chassis_Upload_Data_s chassis_fetch_data; // 从底盘应用接收的反馈信息信息,底盘功率枪口热量与底盘运动状态等
static RC_ctrl_t *rc_data; // 遥控器数据,初始化时返回
static Vision_Recv_s *vision_recv_data; // 视觉接收数据指针,初始化时返回
static Vision_Send_s vision_send_data; // 视觉发送数据
static Publisher_t *gimbal_cmd_pub; // 云台控制消息发布者
static Subscriber_t *gimbal_feed_sub; // 云台反馈信息订阅者
static Gimbal_Ctrl_Cmd_s gimbal_cmd_send; // 传递给云台的控制信息
static Gimbal_Upload_Data_s gimbal_fetch_data; // 从云台获取的反馈信息
static Publisher_t *shoot_cmd_pub; // 发射控制消息发布者
static Subscriber_t *shoot_feed_sub; // 发射反馈信息订阅者
static Shoot_Ctrl_Cmd_s shoot_cmd_send; // 传递给发射的控制信息
static Shoot_Upload_Data_s shoot_fetch_data; // 从发射获取的反馈信息
static Robot_Status_e robot_state; // 机器人整体工作状态
BMI088Instance *bmi088_test; // 云台IMU
BMI088_Data_t bmi088_data;
void RobotCMDInit()
{
// BMI088_Init_Config_s bmi088_config = {
// .cali_mode = BMI088_CALIBRATE_ONLINE_MODE,
// .work_mode = BMI088_BLOCK_TRIGGER_MODE,
// .spi_acc_config = {
// .spi_handle = &hspi1,
// .GPIOx = GPIOA,
// .cs_pin = GPIO_PIN_4,
// .spi_work_mode = SPI_DMA_MODE,
// },
// .acc_int_config = {
// .GPIOx = GPIOC,
// .GPIO_Pin = GPIO_PIN_4,
// .exti_mode = GPIO_EXTI_MODE_RISING,
// },
// .spi_gyro_config = {
// .spi_handle = &hspi1,
// .GPIOx = GPIOB,
// .cs_pin = GPIO_PIN_0,
// .spi_work_mode = SPI_DMA_MODE,
// },
// .gyro_int_config = {
// .GPIO_Pin = GPIO_PIN_5,
// .GPIOx = GPIOC,
// .exti_mode = GPIO_EXTI_MODE_RISING,
// },
// .heat_pwm_config = {
// .htim = &htim10,
// .channel = TIM_CHANNEL_1,
// .period = 1,
// },
// .heat_pid_config = {
// .Kp = 0.5,
// .Ki = 0,
// .Kd = 0,
// .DeadBand = 0.1,
// .Improve = PID_Trapezoid_Intergral | PID_Integral_Limit | PID_Derivative_On_Measurement,
// .IntegralLimit = 100,
// .MaxOut = 100,
// },
// };
//bmi088_test = BMI088Register(&bmi088_config);
rc_data = RemoteControlInit(&huart3); // 修改为对应串口,注意如果是自研板dbus协议串口需选用添加了反相器的那个
vision_recv_data = VisionInit(&huart1); // 视觉通信串口
gimbal_cmd_pub = PubRegister("gimbal_cmd", sizeof(Gimbal_Ctrl_Cmd_s));
gimbal_feed_sub = SubRegister("gimbal_feed", sizeof(Gimbal_Upload_Data_s));
shoot_cmd_pub = PubRegister("shoot_cmd", sizeof(Shoot_Ctrl_Cmd_s));
shoot_feed_sub = SubRegister("shoot_feed", sizeof(Shoot_Upload_Data_s));
#ifdef ONE_BOARD // 双板兼容
chassis_cmd_pub = PubRegister("chassis_cmd", sizeof(Chassis_Ctrl_Cmd_s));
chassis_feed_sub = SubRegister("chassis_feed", sizeof(Chassis_Upload_Data_s));
#endif // ONE_BOARD
#ifdef GIMBAL_BOARD
CANComm_Init_Config_s comm_conf = {
.can_config = {
.can_handle = &hcan1,
.tx_id = 0x312,
.rx_id = 0x311,
},
.recv_data_len = sizeof(Chassis_Upload_Data_s),
.send_data_len = sizeof(Chassis_Ctrl_Cmd_s),
};
cmd_can_comm = CANCommInit(&comm_conf);
#endif // GIMBAL_BOARD
gimbal_cmd_send.pitch = 0;
robot_state = ROBOT_READY; // 启动时机器人进入工作模式,后续加入所有应用初始化完成之后再进入
}
/**
* @brief 根据gimbal app传回的当前电机角度计算和零位的误差
* 单圈绝对角度的范围是0~360,说明文档中有图示
*
*/
static void CalcOffsetAngle()
{
// 别名angle提高可读性,不然太长了不好看,虽然基本不会动这个函数
static float angle;
angle = gimbal_fetch_data.yaw_motor_single_round_angle; // 从云台获取的当前yaw电机单圈角度
#if YAW_ECD_GREATER_THAN_4096 // 如果大于180度
if (angle > YAW_ALIGN_ANGLE && angle <= 180.0f + YAW_ALIGN_ANGLE)
chassis_cmd_send.offset_angle = angle - YAW_ALIGN_ANGLE;
else if (angle > 180.0f + YAW_ALIGN_ANGLE)
chassis_cmd_send.offset_angle = angle - YAW_ALIGN_ANGLE - 360.0f;
else
chassis_cmd_send.offset_angle = angle - YAW_ALIGN_ANGLE;
#else // 小于180度
if (angle > YAW_ALIGN_ANGLE)
chassis_cmd_send.offset_angle = angle - YAW_ALIGN_ANGLE;
else if (angle <= YAW_ALIGN_ANGLE && angle >= YAW_ALIGN_ANGLE - 180.0f)
chassis_cmd_send.offset_angle = angle - YAW_ALIGN_ANGLE;
else
chassis_cmd_send.offset_angle = angle - YAW_ALIGN_ANGLE + 360.0f;
#endif
}
/**
* @brief 控制输入为遥控器(调试时)的模式和控制量设置
*
*/
static void RemoteControlSet()
{
// 控制底盘和云台运行模式,云台待添加,云台是否始终使用IMU数据?
if (switch_is_down(rc_data[TEMP].rc.switch_right)) // 右侧开关状态[下],底盘跟随云台
{
chassis_cmd_send.chassis_mode = CHASSIS_ROTATE;
gimbal_cmd_send.gimbal_mode = GIMBAL_GYRO_MODE;
}
else if (switch_is_mid(rc_data[TEMP].rc.switch_right)) // 右侧开关状态[中],底盘和云台分离,底盘保持不转动
{
chassis_cmd_send.chassis_mode = CHASSIS_NO_FOLLOW;
gimbal_cmd_send.gimbal_mode = GIMBAL_FREE_MODE;
}
// 云台参数,确定云台控制数据
if (switch_is_mid(rc_data[TEMP].rc.switch_left)) // 左侧开关状态为[中],视觉模式
{
// 待添加,视觉会发来和目标的误差,同样将其转化为total angle的增量进行控制
// ...
}
// 左侧开关状态为[下],或视觉未识别到目标,纯遥控器拨杆控制
if (switch_is_down(rc_data[TEMP].rc.switch_left) || vision_recv_data->target_state == NO_TARGET)
{ // 按照摇杆的输出大小进行角度增量,增益系数需调整
gimbal_cmd_send.yaw += 0.005f * (float)rc_data[TEMP].rc.rocker_l_;
gimbal_cmd_send.pitch += 0.001f * (float)rc_data[TEMP].rc.rocker_l1;
}
// 云台软件限位
// 底盘参数,目前没有加入小陀螺(调试似乎暂时没有必要),系数需要调整
chassis_cmd_send.vx = 10.0f * (float)rc_data[TEMP].rc.rocker_r_; // _水平方向
chassis_cmd_send.vy = 10.0f * (float)rc_data[TEMP].rc.rocker_r1; // 1数值方向
// 发射参数
if (switch_is_up(rc_data[TEMP].rc.switch_right)) // 右侧开关状态[上],弹舱打开
; // 弹舱舵机控制,待添加servo_motor模块,开启
else
; // 弹舱舵机控制,待添加servo_motor模块,关闭
// 摩擦轮控制,拨轮向上打为负,向下为正
if (rc_data[TEMP].rc.dial < -100) // 向上超过100,打开摩擦轮
shoot_cmd_send.friction_mode = FRICTION_ON;
else
shoot_cmd_send.friction_mode = FRICTION_OFF;
// 拨弹控制,遥控器固定为一种拨弹模式,可自行选择
if (rc_data[TEMP].rc.dial < -500)
shoot_cmd_send.load_mode = LOAD_BURSTFIRE;
else
shoot_cmd_send.load_mode = LOAD_STOP;
// 射频控制,固定每秒1发,后续可以根据左侧拨轮的值大小切换射频,
shoot_cmd_send.shoot_rate = 8;
}
/**
* @brief 输入为键鼠时模式和控制量设置
*
*/
static void MouseKeySet()
{
chassis_cmd_send.vx = rc_data[TEMP].key[KEY_PRESS].w * 300 - rc_data[TEMP].key[KEY_PRESS].s * 300; // 系数待测
chassis_cmd_send.vy = rc_data[TEMP].key[KEY_PRESS].s * 300 - rc_data[TEMP].key[KEY_PRESS].d * 300;
gimbal_cmd_send.yaw += (float)rc_data[TEMP].mouse.x / 660 * 10; // 系数待测
gimbal_cmd_send.pitch += (float)rc_data[TEMP].mouse.y / 660 * 10;
switch (rc_data[TEMP].key_count[KEY_PRESS][Key_Z] % 3) // Z键设置弹速
{
case 0:
shoot_cmd_send.bullet_speed = 15;
break;
case 1:
shoot_cmd_send.bullet_speed = 18;
break;
default:
shoot_cmd_send.bullet_speed = 30;
break;
}
switch (rc_data[TEMP].key_count[KEY_PRESS][Key_E] % 4) // E键设置发射模式
{
case 0:
shoot_cmd_send.load_mode = LOAD_STOP;
break;
case 1:
shoot_cmd_send.load_mode = LOAD_1_BULLET;
break;
case 2:
shoot_cmd_send.load_mode = LOAD_3_BULLET;
break;
default:
shoot_cmd_send.load_mode = LOAD_BURSTFIRE;
break;
}
switch (rc_data[TEMP].key_count[KEY_PRESS][Key_R] % 2) // R键开关弹舱
{
case 0:
shoot_cmd_send.lid_mode = LID_OPEN;
break;
default:
shoot_cmd_send.lid_mode = LID_CLOSE;
break;
}
switch (rc_data[TEMP].key_count[KEY_PRESS][Key_F] % 2) // F键开关摩擦轮
{
case 0:
shoot_cmd_send.friction_mode = FRICTION_OFF;
break;
default:
shoot_cmd_send.friction_mode = FRICTION_ON;
break;
}
switch (rc_data[TEMP].key_count[KEY_PRESS][Key_C] % 4) // C键设置底盘速度
{
case 0:
chassis_cmd_send.chassis_speed_buff = 40;
break;
case 1:
chassis_cmd_send.chassis_speed_buff = 60;
break;
case 2:
chassis_cmd_send.chassis_speed_buff = 80;
break;
default:
chassis_cmd_send.chassis_speed_buff = 100;
break;
}
switch (rc_data[TEMP].key[KEY_PRESS].shift) // 待添加 按shift允许超功率 消耗缓冲能量
{
case 1:
break;
default:
break;
}
}
/**
* @brief 紧急停止,包括遥控器左上侧拨轮打满/重要模块离线/双板通信失效等
* 停止的阈值'300'待修改成合适的值,或改为开关控制.
*
* @todo 后续修改为遥控器离线则电机停止(关闭遥控器急停),通过给遥控器模块添加daemon实现
*
*/
static void EmergencyHandler()
{
// 拨轮的向下拨超过一半进入急停模式.注意向打时下拨轮是正
if (rc_data[TEMP].rc.dial > 300 || robot_state == ROBOT_STOP) // 还需添加重要应用和模块离线的判断
{
robot_state = ROBOT_STOP;
gimbal_cmd_send.gimbal_mode = GIMBAL_ZERO_FORCE;
chassis_cmd_send.chassis_mode = CHASSIS_ZERO_FORCE;
shoot_cmd_send.shoot_mode = SHOOT_OFF;
shoot_cmd_send.friction_mode = FRICTION_OFF;
shoot_cmd_send.load_mode = LOAD_STOP;
LOGERROR("[CMD] emergency stop!");
}
// 遥控器右侧开关为[上],恢复正常运行
if (switch_is_up(rc_data[TEMP].rc.switch_right))
{
robot_state = ROBOT_READY;
shoot_cmd_send.shoot_mode = SHOOT_ON;
LOGINFO("[CMD] reinstate, robot ready");
}
}
/* 机器人核心控制任务,200Hz频率运行(必须高于视觉发送频率) */
void RobotCMDTask()
{
// BMI088Acquire(bmi088_test,&bmi088_data) ;
// 从其他应用获取回传数据
#ifdef ONE_BOARD
SubGetMessage(chassis_feed_sub, (void *)&chassis_fetch_data);
#endif // ONE_BOARD
#ifdef GIMBAL_BOARD
chassis_fetch_data = *(Chassis_Upload_Data_s *)CANCommGet(cmd_can_comm);
#endif // GIMBAL_BOARD
SubGetMessage(shoot_feed_sub, &shoot_fetch_data);
SubGetMessage(gimbal_feed_sub, &gimbal_fetch_data);
// 根据gimbal的反馈值计算云台和底盘正方向的夹角,不需要传参,通过static私有变量完成
CalcOffsetAngle();
// 根据遥控器左侧开关,确定当前使用的控制模式为遥控器调试还是键鼠
if (switch_is_down(rc_data[TEMP].rc.switch_left)) // 遥控器左侧开关状态为[下],遥控器控制
RemoteControlSet();
else if (switch_is_up(rc_data[TEMP].rc.switch_left)) // 遥控器左侧开关状态为[上],键盘控制
MouseKeySet();
EmergencyHandler(); // 处理模块离线和遥控器急停等紧急情况
// 设置视觉发送数据,还需增加加速度和角速度数据
// VisionSetFlag(chassis_fetch_data.enemy_color,,chassis_fetch_data.bullet_speed)
// 推送消息,双板通信,视觉通信等
// 其他应用所需的控制数据在remotecontrolsetmode和mousekeysetmode中完成设置
#ifdef ONE_BOARD
PubPushMessage(chassis_cmd_pub, (void *)&chassis_cmd_send);
#endif // ONE_BOARD
#ifdef GIMBAL_BOARD
CANCommSend(cmd_can_comm, (void *)&chassis_cmd_send);
#endif // GIMBAL_BOARD
PubPushMessage(shoot_cmd_pub, (void *)&shoot_cmd_send);
PubPushMessage(gimbal_cmd_pub, (void *)&gimbal_cmd_send);
VisionSend(&vision_send_data);
}