TuxMonkey/half-steering-basic-framework
1
0
Fork 0
mirror of https://gitee.com/dlmu-cone/half-steering-basic-framework synced 2026-10-23 17:42:20 +08:00
Code Issues Packages Projects Releases Wiki Activity

damiao motor driver init_1

Browse Source
This commit is contained in:
Zorua
2026-03-15 12:52:05 +08:00
parent fbc83771a8
commit 3afa755680
7 changed files with 53 additions and 54 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
application/chassis/chassis.c
View File

@@ -113,7 +113,7 @@ void ChassisInit()
.can_init_config.can_handle = &hcan1,
.controller_param_init_config = {
.angle_PID = {
.Kp = 50,//15
.Kp = 12,
.Ki = 0.2,
.Kd = 0,
.CoefA = 3,
@@ -125,7 +125,7 @@ void ChassisInit()
.DeadBand = 0.5,
},
.speed_PID = {
.Kp = 50,//25
.Kp = 40,
.Ki = 3,
.Kd = 0,
.Improve = PID_Integral_Limit | PID_Derivative_On_Measurement | PID_ChangingIntegrationRate | PID_OutputFilter,
@@ -154,7 +154,7 @@ void ChassisInit()
.Kp = 1.05, // 6
.Ki = 0,
.Kd = 0.1, // 0.495
// .DeadBand = 0.5f,// 启用死区，值为0.5度
.DeadBand = 0.5f,// 启用死区，值为0.5度
//.CoefA = 0.2,
//.CoefB = 0.3,
//.Improve = PID_Trapezoid_Intergral | PID_DerivativeFilter | PID_DerivativeFilter | PID_Derivative_On_Measurement | PID_Integral_Limit | PID_Derivative_On_Measurement,
@@ -412,9 +412,7 @@ void ChassisTask()
{
single_round_offset += 360.0f;
}
chassis_cmd_recv.wz = PIDCalculate(&chassis_follow_pid, single_round_offset, 0)/100;
// chassis_cmd_recv.wz = PIDCalculate(&chassis_follow_pid, single_round_offset, 0)/100;
chassis_cmd_recv.wz = PIDCalculate(&chassis_follow_pid, single_round_offset, 0)/100;
// chassis_cmd_recv.wz = PIDCalculate(&chassis_follow_pid, chassis_cmd_recv.offset_angle, 0)/100;
break;
case CHASSIS_ROTATE: // 自旋,同时保持全向机动;当前wz维持定值,后续增加不规则的变速策略

28
application/cmd/robot_cmd.c
View File

@@ -84,9 +84,9 @@ void RobotCMDInit()
static void CalcOffsetAngle()
{
static float last_offset_angle = 0;
const float smooth_factor = 0.2f; // 平滑因子,0~1之间,值越大平滑效果越明显
const float smooth_factor = 0.3f; // 平滑因子,0~1之间,值越大平滑效果越明显
//const float deadband = 3.0f; // 死区值
const float deadband = 3.0f; // 死区值
// 新增：跟踪模式变化，用于重置基准角度
// static chassis_mode_e last_chassis_mode = CHASSIS_NO_FOLLOW;//
//
@@ -108,14 +108,14 @@ static void CalcOffsetAngle()
else if (angle_diff < -180.0f)
new_offset += 360.0f;
/////
// // 应用死区
// if (fabs(new_offset) < deadband) {
// new_offset = 0.0f;
// } else if (new_offset > 0) {
// new_offset -= deadband;
// } else {
// new_offset += deadband;
// }//////
// 应用死区
if (fabs(new_offset) < deadband) {
new_offset = 0.0f;
} else if (new_offset > 0) {
new_offset -= deadband;
} else {
new_offset += deadband;
}//////
chassis_cmd_send.offset_angle = last_offset_angle *(1.0f - smooth_factor) + new_offset * smooth_factor;
last_offset_angle = chassis_cmd_send.offset_angle;
// // 更新模式状态
@@ -203,14 +203,14 @@ static void RemoteControlSet()
// 左侧开关状态为[下],或视觉未识别到目标,纯遥控器拨杆控制
if (switch_is_down(rc_data[TEMP].rc.switch_left) )
{ // 按照摇杆的输出大小进行角度增量,增益系数需调整
gimbal_cmd_send.yaw += 0.005f * (float)rc_data[TEMP].rc.rocker_r_;
gimbal_cmd_send.pitch += 0.001f * (float)rc_data[TEMP].rc.rocker_r1;
gimbal_cmd_send.yaw += 0.005f * (float)rc_data[TEMP].rc.rocker_l_;
gimbal_cmd_send.pitch += 0.001f * (float)rc_data[TEMP].rc.rocker_l1;
}
// 云台软件限位
// 底盘参数,目前没有加入小陀螺(调试似乎暂时没有必要),系数需要调整
chassis_cmd_send.vx = 0.15f * (float)rc_data[TEMP].rc.rocker_l_; // _水平方向
chassis_cmd_send.vy = 0.15f * (float)rc_data[TEMP].rc.rocker_l1; // 1数值方向
chassis_cmd_send.vx = 0.15f * (float)rc_data[TEMP].rc.rocker_r_; // _水平方向
chassis_cmd_send.vy = 0.15f * (float)rc_data[TEMP].rc.rocker_r1; // 1数值方向
// // 发射参数
// if (switch_is_up(rc_data[TEMP].rc.switch_right)) // 右侧开关状态[上],弹舱打开

15
application/gimbal/gimbal.c
View File

@@ -66,7 +66,7 @@ void GimbalInit()
Motor_Init_Config_s pitch_config = {
.can_init_config = {
.can_handle = &hcan2,
.tx_id = 2,//2
.tx_id = 4,//2
},
.controller_param_init_config = {
.angle_PID = {
@@ -79,20 +79,12 @@ void GimbalInit()
},
.speed_PID = {
.Kp = 50, // 50
.Ki = 175, // 350
.Ki = 350, // 350
.Kd = 0, // 0
.Improve = PID_Trapezoid_Intergral | PID_Integral_Limit | PID_Derivative_On_Measurement,
.IntegralLimit = 2500,
.MaxOut = 12000,
.MaxOut = 20000,
},
// .current_PID = { // 添加current_PID配置
// .Kp = 0,
// .Ki = 0,
// .Kd = 0,
// .Improve = PID_Integral_Limit,
// .IntegralLimit = 5000,
// .MaxOut = 15000,
// },
.other_angle_feedback_ptr = &gimba_IMU_data->Pitch,
// 还需要增加角速度额外反馈指针,注意方向,ins_task.md中有c板的bodyframe坐标系说明
.other_speed_feedback_ptr = (&gimba_IMU_data->Gyro[0]),
@@ -103,7 +95,6 @@ void GimbalInit()
.outer_loop_type = ANGLE_LOOP,
.close_loop_type = SPEED_LOOP | ANGLE_LOOP,
.motor_reverse_flag = MOTOR_DIRECTION_NORMAL,
.feedback_reverse_flag = FEEDBACK_DIRECTION_REVERSE,
},
.motor_type = DM4310,
};

4
application/robot_def.h
View File

@@ -208,10 +208,6 @@ typedef struct
attitude_t gimbal_imu_data;
uint16_t yaw_motor_single_round_angle;
uint16_t yaw_motor_total_angle;
//uint16_t pitch_motor_single_round_angle;
//uint16_t pitch_motor_total_angle;
// 后续增加云台的其他数据
// ...
} Gimbal_Upload_Data_s;
typedef struct

2
application/shoot/shoot.c
View File

@@ -55,7 +55,7 @@ void ShootInit()
friction_config.can_init_config.tx_id = 1,
friction_l = DJIMotorInit(&friction_config);
friction_config.can_init_config.tx_id = 3; // 右摩擦轮,改txid和方向就行
friction_config.can_init_config.tx_id = 2; // 右摩擦轮,改txid和方向就行
friction_config.controller_setting_init_config.motor_reverse_flag = MOTOR_DIRECTION_REVERSE;
friction_r = DJIMotorInit(&friction_config);