vision init

This reverts commit 69e97cbefa.

CMakeLists.txt

@@ -53,7 +53,7 @@ function(include_sub_directories_recursively root_dir)
         include_directories(${root_dir})
     endif()
 
-    file(GLOB ALL_SUB CONFIGURE_DEPENDS RELATIVE ${root_dir} ${root_dir}/*) # 获得当前目录下的所有文件，让如ALL_SUB列表中
+    file(GLOB ALL_SUB RELATIVE ${root_dir} ${root_dir}/*) # 获得当前目录下的所有文件，让如ALL_SUB列表中
     foreach(sub ${ALL_SUB})
         if (IS_DIRECTORY ${root_dir}/${sub})
             include_sub_directories_recursively(${root_dir}/${sub}) # 对子目录递归调用，包含
@@ -68,7 +68,7 @@ include_sub_directories_recursively(${CMAKE_SOURCE_DIR}/application)
 include_sub_directories_recursively(${CMAKE_SOURCE_DIR}/Inc)
 
 # add source, only surfix .c
-file(GLOB_RECURSE SOURCES CONFIGURE_DEPENDS
+file(GLOB_RECURSE SOURCES
     "Drivers/*.c"
     "Src/*.c"
     "Middlewares/*.c"
@@ -112,4 +112,4 @@ add_custom_command(
     COMMENT "Building hex & bin file..."
     COMMENT "EXCUTABLE SIZE:"
     COMMAND ${SIZE} ${PROJECT_NAME}.elf
-  )
+  )

Src/usart.c

@@ -46,7 +46,7 @@ void MX_USART1_UART_Init(void)
 
   /* USER CODE END USART1_Init 1 */
   huart1.Instance = USART1;
-  huart1.Init.BaudRate = 115200;
+  huart1.Init.BaudRate = 921600;
   huart1.Init.WordLength = UART_WORDLENGTH_8B;
   huart1.Init.StopBits = UART_STOPBITS_1;
   huart1.Init.Parity = UART_PARITY_NONE;

application/chassis/chassis.c

@@ -1,4 +1,3 @@
-
 /**
  * @file chassis.c
  * @author NeoZeng neozng1@hnu.edu.cn
@@ -17,9 +16,6 @@
 #include "dji_motor.h"
 #include "LKMotor.h"
 #include "super_cap.h"
-#include "chassis_power.h"
-#include "power_meter.h"
-#include "vofa.h"
 #include "message_center.h"
 #include "referee_task.h"
 #include "user_lib.h"
@@ -28,41 +24,15 @@
 #include "bsp_dwt.h"
 #include "referee_UI.h"
 #include "arm_math.h"
-#include <math.h>
-
-#ifndef CHASSIS_POWER_LIMIT_ENABLE
-#define CHASSIS_POWER_LIMIT_ENABLE 0
-#endif
-
-#ifndef CHASSIS_POWER_USE_POWER_METER
-#define CHASSIS_POWER_USE_POWER_METER 1
-#endif
-
-#ifndef CHASSIS_POWER_RLS_ENABLE
-#define CHASSIS_POWER_RLS_ENABLE 0
-#endif
-
-#ifndef CHASSIS_POWER_VOFA_ENABLE
-#define CHASSIS_POWER_VOFA_ENABLE 0
-#endif
-
-#ifndef CHASSIS_POWER_VOFA_DIV
-#define CHASSIS_POWER_VOFA_DIV 10u
-#endif
-
-ChassisPowerInstance chassis_power_control;
-PowerMeterInstance *chassis_power_meter;
-ChassisPower_Limit_Input_s chassis_power_debug_input;
 
 /* 根据robot_def.h中的macro自动计算的参数 */
 #define HALF_WHEEL_BASE (WHEEL_BASE / 2.0f)     // 半轴距
 #define HALF_TRACK_WIDTH (TRACK_WIDTH / 2.0f)   // 半轮距
 #define PERIMETER_WHEEL (RADIUS_WHEEL * 2 * PI) // 轮子周长
 #if defined(CHASSIS_MCNAMEE_WHEEL)
-//#define CHASSIS_WHEEL_OFFSET 1.0f // 机器人底盘轮子修正偏移量
+#define CHASSIS_WHEEL_OFFSET 1.0f // 机器人底盘轮子修正偏移量
 #elif defined(CHASSIS_STEERING_WHEEL)
 #define CHASSIS_WHEEL_OFFSET 30.0f       // 机器人底盘轮子修正偏移量
-//#define CHASSIS_WHEEL_OFFSET 2.0f
 #define SQRT2                1.41421356f // 根号2
 #elif defined(CHASSIS_OMNI_WHEEL)
 #define CHASSIS_WHEEL_OFFSET 0.7071f // 机器人底盘轮子修正偏移量，根号2/2，即45度，用于修正全向轮的安装位置
@@ -83,18 +53,18 @@ static Chassis_Ctrl_Cmd_s chassis_cmd_recv;         // 底盘接收到的控制
 static Chassis_Upload_Data_s chassis_feedback_data; // 底盘回传的反馈数据
 
 static referee_info_t* referee_data; // 用于获取裁判系统的数据
-static Referee_Interactive_info_t ui_data; // UI数据，将底盘中的数据传入此结构体的对应变量中，UI会自动检测是否变化，对应显示UI/
+static Referee_Interactive_info_t ui_data; // UI数据，将底盘中的数据传入此结构体的对应变量中，UI会自动检测是否变化，对应显示UI
 
 static SuperCapInstance *cap;                                       // 超级电容
-static LKMotorInstance *motor_rf,*motor_lb;                         // 轮电机9015
+static LKMotorInstance *motor_lb,*motor_rf;                         // 轮电机9015
-static DJIMotorInstance *motor_steering_rf,*motor_steering_lb;     // 舵电机6020
+static DJIMotorInstance *motor_steering_lb,*motor_steering_rf;     // 舵电机6020
 /* 用于自旋变速策略的时间变量 */
 // static float t;
 
 /* 私有函数计算的中介变量,设为静态避免参数传递的开销 */
 static float chassis_vx, chassis_vy;     // 将云台系的速度投影到底盘
-static float vt_rf, vt_lb; // 底盘速度解算后的临时输出,待进行限幅
+static float vt_lb, vt_rf; // 底盘速度解算后的临时输出,待进行限幅
-static float at_rf, at_lb; // 底盘的角度解算后的临时输出,待进行限幅
+static float at_lb, at_rf; // 底盘的角度解算后的临时输出,待进行限幅
 static PIDInstance chassis_follow_pid;   // 底盘跟随云台的PID
 
 void ChassisInit()
@@ -112,7 +82,7 @@ void ChassisInit()
                 .MaxOut = 12000,
             },
             .current_PID = {
-                .Kp = 0.4, // 0.4
+                .Kp = 1, // 0.4
                 .Ki = 0,   // 0
                 .Kd = 0,
                 .IntegralLimit = 10500,
@@ -129,28 +99,28 @@ void ChassisInit()
         .motor_type = LK9015,
     };
     //  @todo: 当前还没有设置电机的正反转,仍然需要手动添加reference的正负号,需要电机module的支持,待修改.
-
+    
     chassis_motor_config.can_init_config.tx_id = 1;
     // chassis_motor_config.controller_setting_init_config.motor_reverse_flag = MOTOR_DIRECTION_REVERSE;
-     motor_lb= LKMotorInit(&chassis_motor_config);
+    motor_rf = LKMotorInit(&chassis_motor_config);
-
+    
     chassis_motor_config.can_init_config.tx_id = 2;
     // chassis_motor_config.controller_setting_init_config.motor_reverse_flag = MOTOR_DIRECTION_REVERSE;
-    motor_rf = LKMotorInit(&chassis_motor_config);
+    motor_lb = LKMotorInit(&chassis_motor_config);
 
     // 舵电机6020初始化
     Motor_Init_Config_s chassis_motor_steering_config = {
         .can_init_config.can_handle   = &hcan1,
         .controller_param_init_config = {
             .angle_PID = {
-                .Kp                = 12,
+                .Kp                = 35,
-                .Ki                = 0.2,
+                .Ki                = 0.25,
                 .Kd                = 0,
                 .CoefA             = 3,
                 .CoefB             = 0.1,
                 .Improve           = PID_Trapezoid_Intergral | PID_Integral_Limit | PID_Derivative_On_Measurement | PID_DerivativeFilter | PID_ChangingIntegrationRate,
-                .IntegralLimit     = 1000,
+                .IntegralLimit     = 1500,
-                .MaxOut            = 5000,
+                .MaxOut            = 6000,
                 .Derivative_LPF_RC = 0.001,
                 .DeadBand          = 0.5,
             },
@@ -174,23 +144,23 @@ void ChassisInit()
         .motor_type = GM6020,
     };
 
-    chassis_motor_steering_config.can_init_config.tx_id = 2;
-    motor_steering_rf                                   = DJIMotorInit(&chassis_motor_steering_config);
-
     chassis_motor_steering_config.can_init_config.tx_id = 1;
+    motor_steering_rf                                   = DJIMotorInit(&chassis_motor_steering_config);
+    
+    chassis_motor_steering_config.can_init_config.tx_id = 2;
     motor_steering_lb                                   = DJIMotorInit(&chassis_motor_steering_config);
 
     PID_Init_Config_s chassis_follow_pid_conf = {
-        .Kp                = 1.2, // 6
+        .Kp                = 0.95, // 6
         .Ki                = 0,
-        .Kd                = 0.1f, // 0.5
+        .Kd                = 0.1, // 0.495
-        .DeadBand          = 0.5,
+         .DeadBand          = 0.5f,// 启用死区，值为0.5度
-        // .CoefA             = 0.2,
+        //.CoefA             = 0.2,
-        // .CoefB             = 0.3,
+        //.CoefB             = 0.3,
-        // .Improve           = PID_Trapezoid_Intergral | PID_DerivativeFilter | PID_DerivativeFilter | PID_Derivative_On_Measurement | PID_Integral_Limit | PID_Derivative_On_Measurement,
+        //.Improve           = PID_Trapezoid_Intergral | PID_DerivativeFilter | PID_DerivativeFilter | PID_Derivative_On_Measurement | PID_Integral_Limit | PID_Derivative_On_Measurement,
-        // .IntegralLimit     = 50, // 200
+        //.IntegralLimit     = 50, // 200
-        .MaxOut            = 50,
+        .MaxOut            = 45,
-        // .Derivative_LPF_RC = 0.01, // 0.01
+        //.Derivative_LPF_RC = 0.01, // 0.01
     };
     PIDInit(&chassis_follow_pid, &chassis_follow_pid_conf);
 
@@ -200,34 +170,14 @@ void ChassisInit()
 
     SuperCap_Init_Config_s cap_conf = {
         .can_config = {
-            .can_handle = &hcan2,
+            .can_handle = &hcan1, // 保持你原有的硬件CAN接口不变
-            .tx_id = 0x001, // 超级电容默认接收id
+            .tx_id = 0x001,       // C板发给超级电容的ID
-            .rx_id = 0x100, // 超级电容默认发送id,注意tx和rx在其他人看来是反的
+            .rx_id = 0x100,       // 超级电容发给C板的ID
         }};
-    cap = SuperCapInit(&cap_conf); // 超级电容初始化
+    cap = SuperCapInit(&cap_conf); // 超级电容初始化 todo 控制
 
-    // （新增）设置超级电容功率补偿，例如补偿5W，可根据实际需求调整
+    // （新增）设置超级电容功率补偿，例如补偿5W，可根据实际需求调整 todo 控制
-    SuperCapSetPowerOffset(cap, 5);
+     SuperCapSetPowerOffset(cap, 5);
-
-#if CHASSIS_POWER_USE_POWER_METER
-    chassis_power_meter = PowerMeterInitCan(&hcan1, POWER_METER_DEFAULT_CAN_ID);
-#endif
-
-    ChassisPowerMotorModel_s wheel_model = ChassisPowerGetDefault3508Model();
-    ChassisPower_Init_Config_s power_config = {
-        .wheel_model = wheel_model,
-        .default_power_limit = 60.0f,
-        .min_power_limit = 20.0f,
-        .buffer_low = 30.0f,
-        .buffer_high = 50.0f,
-        .buffer_gain = 0.25f,
-        .steering_power_reserve = 6.0f,
-        .min_scale = 0.20f,
-        .rls_lambda = 0.995f,
-        .rls_init_covariance = 1000.0f,
-        .rls_enable = CHASSIS_POWER_RLS_ENABLE,
-    };
-    ChassisPowerInit(&chassis_power_control, &power_config);
 
     // 发布订阅初始化,如果为双板,则需要can comm来传递消息
 #ifdef CHASSIS_BOARD
@@ -285,7 +235,7 @@ static void MinmizeRotation(float *angle, const float *last_angle, float *speed)
     while (norm_rotation < -180.0f) {
         norm_rotation += 360.0f;
     }
-    float threshold = 90.0f;
+    float threshold = 110.0f;
     float target_single=fmodf(target_angle,360.0f);
     if(target_single<0.0f) target_single+=360.0f;
 
@@ -297,11 +247,12 @@ static void MinmizeRotation(float *angle, const float *last_angle, float *speed)
         int32_t round_diff = (int32_t)((target_angle-actual_angle) / 360.0f);
         *angle = actual_angle + norm_rotation-180.0f+round_diff*360.0f;
         *speed = -(*speed);
-    }else if(norm_rotation<-threshold) {
+    }else if(norm_rotation<-threshold){
         int32_t round_diff = (int32_t)((target_angle-actual_angle) / 360.0f);
         *angle = actual_angle + norm_rotation+180.0f+round_diff*360.0f;
         *speed = -(*speed);
     }
+    // ANGLE_LIMIT_360_TO_180_ABS(*angle);
     // float rotation = *angle - *last_angle;
     // ANGLE_LIMIT_360_TO_180_ABS(rotation);
     // if (rotation > 90) {
@@ -318,56 +269,59 @@ static void MinmizeRotation(float *angle, const float *last_angle, float *speed)
  * @brief 舵轮电机角度解算
  *
  */
-static void SteeringWheelCalculate()
+    static void SteeringWheelCalculate()
 {
-    float offset_rf, offset_lb;     // 用于计算舵轮的角度
+    float  offset_rf, offset_lb;     // 用于计算舵轮的角度
-    float at_rf_last, at_lb_last;   // 上次的角度
+    float  at_rf_last, at_lb_last; // 上次的角度
-    at_rf_last = motor_steering_rf->measure.total_angle;
     at_lb_last = motor_steering_lb->measure.total_angle;
+    // at_lf_last = motor_steering_lf->measure.total_angle;
+    at_rf_last = motor_steering_rf->measure.total_angle;
+    // at_rb_last = motor_steering_rb->measure.total_angle;
     if (chassis_vx == 0 && chassis_vy == 0 && chassis_cmd_recv.wz == 0) {
         // at_lf = at_lf_last;
         // at_rf = at_rf_last;
         // at_lb = at_lb_last;
         // at_rb = at_rb_last;
-        vt_rf = 0, vt_lb = 0;
+        vt_lb = 0,  vt_rf = 0;
     } else {
         // 生成预计算变量，减少计算量，空间换时间
-        //float w      = chassis_cmd_recv.wz * CHASSIS_WHEEL_OFFSET * SQRT2;
+        float w      = chassis_cmd_recv.wz * CHASSIS_WHEEL_OFFSET * SQRT2;
-        float w      = chassis_cmd_recv.wz * CHASSIS_WHEEL_OFFSET ;
+        float temp_x = chassis_vx - w, temp_y = chassis_vy - w;
-        // float temp_x = chassis_vx - w, temp_y = chassis_vy - w;
         // arm_sqrt_f32(temp_x * temp_x + temp_y * temp_y, &vt_lf); // lf：y- , x-
         // temp_y = chassis_vy + w;                                 // 重复利用变量,temp_x = chassis_vy - w;与上次相同因此注释
-        // // arm_sqrt_f32(temp_x * temp_x + temp_y * temp_y, &vt_lb); // lb: y+ , x-
-        // // temp_x = chassis_vx + w;                                 // temp_y = chassis_vx + w;与上次相同因此注释
-        // arm_sqrt_f32(temp_x * temp_x + temp_y * temp_y, &vt_rb); // rb: y+ , x+
-        // temp_y = chassis_vy - w;                                 // temp_x = chassis_vy + w;与上次相同因此注释
-        // // arm_sqrt_f32(temp_x * temp_x + temp_y * temp_y, &vt_rf); // rf: y- , x+
-        float temp_x = chassis_vx - w, temp_y = chassis_vy + w;
         arm_sqrt_f32(temp_x * temp_x + temp_y * temp_y, &vt_lb); // lb: y+ , x-
         temp_x = chassis_vx + w;
-        temp_y = chassis_vy - w;
+        temp_y = chassis_vy + w;//与上次相同因此注释
+        // arm_sqrt_f32(temp_x * temp_x + temp_y * temp_y, &vt_rb); // rb: y+ , x+
+        // temp_y = chassis_vy - w;                                 // temp_x = chassis_vy + w;与上次相同因此注释
         arm_sqrt_f32(temp_x * temp_x + temp_y * temp_y, &vt_rf); // rf: y- , x+
 
         // 计算角度偏移
         // offset_lf = atan2f(chassis_vy - w, chassis_vx - w) * RAD_2_DEGREE; // lf:  y- , x-
+        offset_rf = atan2f(chassis_vy - w, chassis_vx - w) * RAD_2_DEGREE; // rf:  y- , x+
+        offset_lb = atan2f(chassis_vy + w, chassis_vx + w) * RAD_2_DEGREE; // lb:  y+ , x-注意
         // offset_rb = atan2f(chassis_vy + w, chassis_vx + w) * RAD_2_DEGREE; // rb:  y+ , x+
-        offset_lb = atan2f(chassis_vy + w, chassis_vx - w) * RAD_2_DEGREE; // lb: y+ , x-
-        offset_rf = atan2f(chassis_vy - w, chassis_vx + w) * RAD_2_DEGREE; // rf: y- , x+
 
-        at_rf = STEERING_CHASSIS_ALIGN_ANGLE_RF + offset_rf; // 此处似乎不需要加上真实角度，因为我们需要的是绝对角度而不是相对角度
+        // at_lf = STEERING_CHASSIS_ALIGN_ANGLE_LF + offset_lf; // 此处似乎不需要加上真实角度，因为我们需要的是绝对角度而不是相对角度
+        at_rf = STEERING_CHASSIS_ALIGN_ANGLE_RF + offset_rf;
         at_lb = STEERING_CHASSIS_ALIGN_ANGLE_LB + offset_lb;
+        // at_rb = STEERING_CHASSIS_ALIGN_ANGLE_RB + offset_rb;
 
+        // ANGLE_LIMIT_360_TO_180_ABS(at_lf);
         ANGLE_LIMIT_360_TO_180_ABS(at_rf);
         ANGLE_LIMIT_360_TO_180_ABS(at_lb);
+        // ANGLE_LIMIT_360_TO_180_ABS(at_rb);
 
         // MinmizeRotation(&at_lf, &at_lf_last, &vt_lf);
-        // MinmizeRotation(&at_rb, &at_rb_last, &vt_rb);
-        MinmizeRotation(&at_lb, &at_lb_last, &vt_lb);
         MinmizeRotation(&at_rf, &at_rf_last, &vt_rf);
+        MinmizeRotation(&at_lb, &at_lb_last, &vt_lb);
+        // MinmizeRotation(&at_rb, &at_rb_last, &vt_rb);
     }
 
+    // DJIMotorSetRef(motor_steering_lf, at_lf);
     DJIMotorSetRef(motor_steering_rf, at_rf);
     DJIMotorSetRef(motor_steering_lb, at_lb);
+    // DJIMotorSetRef(motor_steering_rb, at_rb);
 }
 
 /**
@@ -388,129 +342,12 @@ static void SteeringWheelCalculate()
  */
 static void LimitChassisOutput()
 {
-#if CHASSIS_POWER_LIMIT_ENABLE
-    float limited_rf = vt_rf;
-    float limited_lb = vt_lb;
-    const PowerMeterInstance *meter_data = 0;
-#if CHASSIS_POWER_USE_POWER_METER
-    meter_data = PowerMeterGetData(chassis_power_meter);
-#endif
-
-    ChassisPower_Limit_Input_s power_input = {
-        .rf_speed_ref = vt_rf,
-        .lb_speed_ref = vt_lb,
-        .rf_speed = motor_rf->measure.speed_rads,
-        .lb_speed = motor_lb->measure.speed_rads,
-        .rf_current_cmd = motor_rf->speed_PID.Output,
-        .lb_current_cmd = motor_lb->speed_PID.Output,
-        .rf_output_cmd = motor_rf->current_PID.Output,
-        .lb_output_cmd = motor_lb->current_PID.Output,
-        .rf_feedback_current = motor_rf->measure.real_current,
-        .lb_feedback_current = motor_lb->measure.real_current,
-        .referee_limit = referee_data != 0 ? referee_data->GameRobotState.chassis_power_limit : 0.0f,
-        .referee_power = referee_data != 0 ? referee_data->PowerHeatData.chassis_power : 0.0f,
-        .power_buffer = referee_data != 0 ? referee_data->PowerHeatData.chassis_power_buffer : 0.0f,
-        .measured_power = meter_data != 0 ? meter_data->power : 0.0f,
-        .steering_power_estimate = 0.0f,
-        .power_meter_online = meter_data != 0 ? meter_data->online : 0u,
-    };
-    chassis_power_debug_input = power_input;
-
-    ChassisPowerUpdateMeasureState(&chassis_power_control, &power_input);
-    ChassisPowerLimitWheelRefs(&chassis_power_control, &power_input, &limited_rf, &limited_lb);
-    if (power_input.power_meter_online) {
-        ChassisPowerUpdateRLS(&chassis_power_control, &power_input, power_input.measured_power);
-    }
-
-    vt_rf = limited_rf;
-    vt_lb = limited_lb;
-
-#if CHASSIS_POWER_VOFA_ENABLE
-    static uint16_t vofa_divider = 0u;
-    if (++vofa_divider >= CHASSIS_POWER_VOFA_DIV) {
-        vofa_divider = 0u;
-        const ChassisPower_State_s *power_state = ChassisPowerGetState(&chassis_power_control);
-        float vofa_data[] = {
-            power_state->estimated_total_power,
-            power_state->allowed_power,
-            power_state->scale,
-            power_input.measured_power,
-            meter_data != 0 ? meter_data->voltage : 0.0f,
-            meter_data != 0 ? meter_data->current : 0.0f,
-            power_state->rf_ref_raw,
-            power_state->rf_ref_limited,
-            power_state->lb_ref_raw,
-            power_state->lb_ref_limited,
-            motor_rf->measure.speed_rads,
-            motor_lb->measure.speed_rads,
-            motor_rf->speed_PID.Output,
-            motor_lb->speed_PID.Output,
-            motor_rf->measure.real_current,
-            motor_lb->measure.real_current,
-        };
-        vofa_justfloat_output(vofa_data, sizeof(vofa_data) / sizeof(vofa_data[0]), &huart1);
-    }
-#endif
-#else
-    const PowerMeterInstance *meter_data = 0;
-#if CHASSIS_POWER_USE_POWER_METER
-    meter_data = PowerMeterGetData(chassis_power_meter);
-#endif
-
-    ChassisPower_Limit_Input_s power_input = {
-        .rf_speed_ref = vt_rf,
-        .lb_speed_ref = vt_lb,
-        .rf_speed = motor_rf->measure.speed_rads,
-        .lb_speed = motor_lb->measure.speed_rads,
-        .rf_current_cmd = motor_rf->speed_PID.Output,
-        .lb_current_cmd = motor_lb->speed_PID.Output,
-        .rf_output_cmd = motor_rf->current_PID.Output,
-        .lb_output_cmd = motor_lb->current_PID.Output,
-        .rf_feedback_current = motor_rf->measure.real_current,
-        .lb_feedback_current = motor_lb->measure.real_current,
-        .referee_limit = referee_data != 0 ? referee_data->GameRobotState.chassis_power_limit : 0.0f,
-        .referee_power = referee_data != 0 ? referee_data->PowerHeatData.chassis_power : 0.0f,
-        .power_buffer = referee_data != 0 ? referee_data->PowerHeatData.chassis_power_buffer : 0.0f,
-        .measured_power = meter_data != 0 ? meter_data->power : 0.0f,
-        .steering_power_estimate = 0.0f,
-        .power_meter_online = meter_data != 0 ? meter_data->online : 0u,
-    };
-    chassis_power_debug_input = power_input;
-    ChassisPowerUpdateMeasureState(&chassis_power_control, &power_input);
-
-#if CHASSIS_POWER_VOFA_ENABLE
-    static uint16_t vofa_divider = 0u;
-    if (++vofa_divider >= CHASSIS_POWER_VOFA_DIV) {
-        vofa_divider = 0u;
-        const ChassisPower_State_s *power_state = ChassisPowerGetState(&chassis_power_control);
-        float vofa_data[] = {
-            power_state->estimated_total_power,
-            power_state->allowed_power,
-            power_state->scale,
-            power_input.measured_power,
-            meter_data != 0 ? meter_data->voltage : 0.0f,
-            meter_data != 0 ? meter_data->current : 0.0f,
-            power_state->rf_ref_raw,
-            power_state->rf_ref_limited,
-            power_state->lb_ref_raw,
-            power_state->lb_ref_limited,
-            motor_rf->measure.speed_rads,
-            motor_lb->measure.speed_rads,
-            motor_rf->speed_PID.Output,
-            motor_lb->speed_PID.Output,
-            motor_rf->measure.real_current,
-            motor_lb->measure.real_current,
-        };
-        vofa_justfloat_output(vofa_data, sizeof(vofa_data) / sizeof(vofa_data[0]), &huart1);
-    }
-#endif
-#endif
     // 功率限制待添加
     // referee_data->PowerHeatData.chassis_power;
     // referee_data->PowerHeatData.chassis_power_buffer;
 
     // 完成功率限制后进行电机参考输入设定
-
+    
     // LKMotorSetRef( motor_lf , vt_lf );
     // LKMotorSetRef( motor_rb , vt_rb );
 
@@ -531,7 +368,8 @@ static void EstimateSpeed()
 }
 
 /* 机器人底盘控制核心任务 */
-void ChassisTask() {
+void ChassisTask()
+{
     // 后续增加没收到消息的处理(双板的情况)
     // 获取新的控制信息
 #ifdef ONE_BOARD
@@ -560,76 +398,49 @@ void ChassisTask() {
     // 根据控制模式设定旋转速度
     switch (chassis_cmd_recv.chassis_mode)
     {
-        case CHASSIS_NO_FOLLOW: // 底盘不旋转,但维持全向机动,一般用于调整云台姿态
+    case CHASSIS_NO_FOLLOW: // 底盘不旋转,但维持全向机动,一般用于调整云台姿态
-            chassis_cmd_recv.wz = 0;
+        chassis_cmd_recv.wz = 0;
-            break;
+        break;
-        case CHASSIS_FOLLOW_GIMBAL_YAW: // 跟随云台,不单独设置pid,以误差角度平方为速度输出
+    case CHASSIS_FOLLOW_GIMBAL_YAW: // 跟随云台,不单独设置pid,以误差角度平方为速度输出
-            //chassis_cmd_recv.wz = PIDCalculate(&chassis_follow_pid, chassis_cmd_recv.offset_angle, 0);
+        // float single_round_offset = chassis_cmd_recv.offset_angle;
-            float single_round_offset = chassis_cmd_recv.offset_angle;
+        float single_round_offset = chassis_cmd_recv.offset_angle;
-            if(single_round_offset > 180.0f)
+        if(single_round_offset > 180.0f)
-            {
+        {
-                single_round_offset -= 360.0f;
+            single_round_offset -= 360.0f;
-            }
+        }
-            else if(single_round_offset < -180.0f)
+        else if(single_round_offset < -180.0f)
-            {
+        {
-                single_round_offset += 360.0f;
+            single_round_offset += 360.0f;
-            }
+        }
-            chassis_cmd_recv.wz = -PIDCalculate(&chassis_follow_pid, single_round_offset, 0)/60.0f;
+        chassis_cmd_recv.wz = PIDCalculate(&chassis_follow_pid, single_round_offset, 0)/100;
-            break;
+        // chassis_cmd_recv.wz = PIDCalculate(&chassis_follow_pid, chassis_cmd_recv.offset_angle, 0)/100;
-        case CHASSIS_ROTATE: // 自旋,同时保持全向机动;当前wz维持定值,后续增加不规则的变速策略
+        break;
-            chassis_cmd_recv.wz = 1.00;//实验版
+    case CHASSIS_ROTATE: // 自旋,同时保持全向机动;当前wz维持定值,后续增加不规则的变速策略
-            break;
+        chassis_cmd_recv.wz = 0.5;
-        default:
+        break;
-            break;
+    default:
+        break;
     }
-    float sin_theta = 0.0f, cos_theta = 1.0f;
-    // ------------------ 【修改部分：加入相位滞后动态补偿】 ------------------
-    // 提取当前的云台-底盘夹角
-    float real_offset_angle = chassis_cmd_recv.offset_angle;
 
-    // 如果处于小陀螺模式（或者 wz 不为 0），根据旋转速度进行超前补偿
+    // 根据云台和底盘的角度offset将控制量映射到底盘坐标系上
-    if (chassis_cmd_recv.chassis_mode == CHASSIS_ROTATE )
+    // 底盘逆时针旋转为角度正方向;云台命令的方向以云台指向的方向为x,采用右手系(x指向正北时y在正东)
-    {
+    static float sin_theta, cos_theta;
-        // 补偿系数 K 需要实车微调。
+    cos_theta = arm_cos_f32(chassis_cmd_recv.offset_angle * DEGREE_2_RAD);
-        // 根据你的描述 wz=0.95 时偏差约45度，初始 K 值可以设为 45.0 / 0.95 ≈ 47.3f
+    sin_theta = arm_sin_f32(chassis_cmd_recv.offset_angle * DEGREE_2_RAD);
-        float lag_compensation_K = 47.3f;//47.3f;45.0f
+    chassis_vx = chassis_cmd_recv.vx * cos_theta - chassis_cmd_recv.vy * sin_theta;
-
+    chassis_vy = -chassis_cmd_recv.vx * sin_theta - chassis_cmd_recv.vy * cos_theta;
-        // 符号(+或-)取决于你的电机正方向、底盘旋转正方向，如果不正就改成减号
-        real_offset_angle -= (chassis_cmd_recv.wz * lag_compensation_K);
-        cos_theta = arm_cos_f32(real_offset_angle * DEGREE_2_RAD);
-        sin_theta = arm_sin_f32(real_offset_angle * DEGREE_2_RAD);
-
-    }else if (chassis_cmd_recv.chassis_mode == CHASSIS_FOLLOW_GIMBAL_YAW)
-    {
-        cos_theta = arm_cos_f32(chassis_cmd_recv.offset_angle * DEGREE_2_RAD);
-        sin_theta = arm_sin_f32(chassis_cmd_recv.offset_angle * DEGREE_2_RAD);
-
-    }
-    // ----------------------------------------------------------------------
-        chassis_vx = (chassis_cmd_recv.vx * cos_theta + chassis_cmd_recv.vy * sin_theta)/4;
-        chassis_vy = (-chassis_cmd_recv.vx * sin_theta + chassis_cmd_recv.vy * cos_theta)/4;
-
-    // 使用补偿后的角度进行坐标系投影
-
-
-    // static float sin_theta, cos_theta;
-    // cos_theta = arm_cos_f32(chassis_cmd_recv.offset_angle * DEGREE_2_RAD);
-    // sin_theta = arm_sin_f32(chassis_cmd_recv.offset_angle * DEGREE_2_RAD);
-    // chassis_vx = (chassis_cmd_recv.vx * cos_theta + chassis_cmd_recv.vy * sin_theta)/4;
-    // chassis_vy = (-chassis_cmd_recv.vx * sin_theta + chassis_cmd_recv.vy * cos_theta)/4;
 
     // 根据控制模式进行正运动学解算,计算底盘输出
     SteeringWheelCalculate();
     // MecanumCalculate();
 
-
     // 根据裁判系统的反馈数据和电容数据对输出限幅并设定闭环参考值
     LimitChassisOutput();
 
     // 根据电机的反馈速度和IMU(如果有)计算真实速度
     EstimateSpeed();
 
-    // // 获取裁判系统数据   建议将裁判系统与底盘分离，所以此处数据应使用消息中心发送/
+    // // 获取裁判系统数据   建议将裁判系统与底盘分离，所以此处数据应使用消息中心发送
     // // 我方颜色id小于7是红色,大于7是蓝色,注意这里发送的是对方的颜色, 0:blue , 1:red
     // chassis_feedback_data.enemy_color = referee_data->GameRobotState.robot_id > 7 ? 1 : 0;
     // // 当前只做了17mm热量的数据获取,后续根据robot_def中的宏切换双枪管和英雄42mm的情况

application/cmd/robot_cmd.c

@@ -8,12 +8,10 @@
 #include "message_center.h"
 #include "general_def.h"
 #include "dji_motor.h"
-#include "referee_task.h"
 // bsp
 #include "bsp_dwt.h"
 #include "bsp_log.h"
 #include "main.h"
-#include "shoot.h"
 // 私有宏,自动将编码器转换成角度值
 #define YAW_ALIGN_ANGLE (YAW_CHASSIS_ALIGN_ECD * ECD_ANGLE_COEF_DJI) // 对齐时的角度,0-360
 #define PTICH_HORIZON_ANGLE (PITCH_HORIZON_ECD * ECD_ANGLE_COEF_DJI) // pitch水平时电机的角度,0-360
@@ -46,7 +44,6 @@ static Shoot_Ctrl_Cmd_s shoot_cmd_send;      // 传递给发射的控制信息
 static Shoot_Upload_Data_s shoot_fetch_data; // 从发射获取的反馈信息
 
 static Robot_Status_e robot_state; // 机器人整体工作状态
-static uint8_t robot_level = 1; // 机器人等级，范围1-10，上电重置为1
 
 void RobotCMDInit()
 {
@@ -87,17 +84,9 @@ void RobotCMDInit()
 static void CalcOffsetAngle()
 {
     static float last_offset_angle = 0;
-    //const float smooth_factor = 0.3f; // 平滑因子,
+    const float smooth_factor = 0.3f; // 平滑因子,0~1之间,值越大平滑效果越明显
 
-     float smooth_factor;
+    const float deadband = 3.0f;       // 死区值
-    // 小陀螺模式下使用更大的平滑因子，让offset_angle更快跟随云台
-    if (chassis_cmd_send.chassis_mode == CHASSIS_ROTATE) {
-        smooth_factor = 0.9f;  // 快速响应
-    } else {
-        smooth_factor = 0.3f;  // 平滑过渡 0~1之间,值越大平滑效果越明显
-    }
-
-    //const float deadband = 3.0f;       // 死区值
     // 新增：跟踪模式变化，用于重置基准角度
     // static chassis_mode_e last_chassis_mode = CHASSIS_NO_FOLLOW;//
     //
@@ -119,14 +108,14 @@ static void CalcOffsetAngle()
     else if (angle_diff < -180.0f)
         new_offset += 360.0f;
     /////
-   //  // 应用死区
+    // 应用死区
-   //  if (fabs(new_offset) < deadband) {
+    if (fabs(new_offset) < deadband) {
-   //      new_offset = 0.0f;
+        new_offset = 0.0f;
-   //  } else if (new_offset > 0) {
+    } else if (new_offset > 0) {
-   //     new_offset -= deadband;
+       new_offset -= deadband;
-   // } else {
+   } else {
-   //      new_offset += deadband;
+        new_offset += deadband;
-   //  }//////
+    }//////
          chassis_cmd_send.offset_angle = last_offset_angle *(1.0f - smooth_factor) + new_offset * smooth_factor;
      last_offset_angle = chassis_cmd_send.offset_angle;
     // // 更新模式状态
@@ -195,12 +184,12 @@ static void RemoteControlSet()
         // around = 0;
         chassis_cmd_send.chassis_mode = CHASSIS_ROTATE;
         gimbal_cmd_send.gimbal_mode = GIMBAL_GYRO_MODE;
-        around= chassis_cmd_send.offset_angle/(-360);
+        around= chassis_cmd_send.offset_angle/360;
     }
     else if (switch_is_mid(rc_data[TEMP].rc.switch_right)) // 右侧开关状态[中],底盘和云台分离,底盘保持不转动
     {
-        //gimbal_fetch_data.yaw_motor_total_angle = gimbal_fetch.yaw_motor_total_angle-around*360;
+        //gimbal_fetch_data.yaw_motor_total_angle = gimbal_fetch_data.yaw_motor_total_angle-around*360;
-        chassis_cmd_send.offset_angle =  chassis_cmd_send.offset_angle + 360*around;
+        chassis_cmd_send.offset_angle =  chassis_cmd_send.offset_angle - 360*around;
         chassis_cmd_send.chassis_mode = CHASSIS_FOLLOW_GIMBAL_YAW;
         gimbal_cmd_send.gimbal_mode = GIMBAL_GYRO_MODE;
     }
@@ -208,25 +197,20 @@ static void RemoteControlSet()
     // 云台参数,确定云台控制数据
     if (switch_is_mid(rc_data[TEMP].rc.switch_left)) // 左侧开关状态为[中],视觉模式
     {
-        // 待添加,视觉会发来和目标的误差,同样将其转化为total angle的增量进行控制/
+        // 待添加,视觉会发来和目标的误差,同样将其转化为total angle的增量进行控制
         // ...
     }
     // 左侧开关状态为[下],或视觉未识别到目标,纯遥控器拨杆控制
     if (switch_is_down(rc_data[TEMP].rc.switch_left) )
     { // 按照摇杆的输出大小进行角度增量,增益系数需调整
-        gimbal_cmd_send.yaw += 0.005f * (float)rc_data[TEMP].rc.rocker_l_;
+        gimbal_cmd_send.yaw += 0.005f * (float)rc_data[TEMP].rc.rocker_r_;
-        gimbal_cmd_send.pitch += 0.001f * (float)rc_data[TEMP].rc.rocker_l1;
+        gimbal_cmd_send.pitch += 0.001f * (float)rc_data[TEMP].rc.rocker_r1;
     }
     // 云台软件限位
-    if (gimbal_cmd_send.pitch > PITCH_MAX_ANGLE)
-        gimbal_cmd_send.pitch = PITCH_MAX_ANGLE;
-    else if (gimbal_cmd_send.pitch < PITCH_MIN_ANGLE)
-        gimbal_cmd_send.pitch = PITCH_MIN_ANGLE;
-
     // 底盘参数,目前没有加入小陀螺(调试似乎暂时没有必要),系数需要调整
-    chassis_cmd_send.vx = (0.25f * (float)rc_data[TEMP].rc.rocker_r1); // 竖直方向
+    chassis_cmd_send.vx = 0.15f * (float)rc_data[TEMP].rc.rocker_l_; // _水平方向
-    chassis_cmd_send.vy = (0.25f * (float)rc_data[TEMP].rc.rocker_r_); // 水平方向
+    chassis_cmd_send.vy = 0.15f * (float)rc_data[TEMP].rc.rocker_l1; // 1数值方向
-    //此处如果是右手系，那么x应该是前进方向即竖直方向
+
     // // 发射参数
     // if (switch_is_up(rc_data[TEMP].rc.switch_right)) // 右侧开关状态[上],弹舱打开
     //     ;                                            // 弹舱舵机控制,待添加servo_motor模块,开启
@@ -239,8 +223,8 @@ static void RemoteControlSet()
     else
         shoot_cmd_send.friction_mode = FRICTION_OFF;
     // 拨弹控制,遥控器固定为一种拨弹模式,可自行选择
-    if (rc_data[TEMP].rc.dial >500)
+    if (rc_data[TEMP].rc.dial < -500)
-        shoot_cmd_send.load_mode = LOAD_3_BULLET;
+        shoot_cmd_send.load_mode = LOAD_BURSTFIRE;
     else
         shoot_cmd_send.load_mode = LOAD_STOP;
     // 射频控制,固定每秒1发,后续可以根据左侧拨轮的值大小切换射频,
@@ -253,74 +237,13 @@ static void RemoteControlSet()
  */
 static void MouseKeySet()
 {
-
+    chassis_cmd_send.vx = rc_data[TEMP].key[KEY_PRESS].w * 300 - rc_data[TEMP].key[KEY_PRESS].s * 300; // 系数待测
-    // // G键控制机器人等级，每次按G键等级+1，最高10级/
+    chassis_cmd_send.vy = rc_data[TEMP].key[KEY_PRESS].s * 300 - rc_data[TEMP].key[KEY_PRESS].d * 300;
-    // if (rc_data[TEMP].key[KEY_PRESS].g && rc_data[TEMP].key_count[KEY_PRESS][Key_G] > 0) {
-    //     robot_level = (robot_level % 10) + 1; // 等级循环增加，1-10
-    // }
-    // G键控制机器人等级，每次按G键等级+1，最高10级
-    if (rc_data[TEMP].key[KEY_PRESS].g && rc_data[TEMP].key_count[KEY_PRESS][Key_G] > 0) {
-        robot_level = (robot_level % 10) + 1; // 等级循环增加，1-10
-        rc_data[TEMP].key_count[KEY_PRESS][Key_G] = 0; // 清除计数器，防止重复执行
-    }
-
-    // B键刷新裁判系统UI
-    if (rc_data[TEMP].key[KEY_PRESS].b && rc_data[TEMP].key_count[KEY_PRESS][Key_B] > 0) {
-        MyUIInit(); // 重新初始化UI
-        rc_data[TEMP].key_count[KEY_PRESS][Key_B] = 0; // 清除计数器，防止重复执行
-    }
-
-    // 将robot_level传递给底盘控制命令
-    chassis_cmd_send.robot_level = robot_level;
-    chassis_cmd_send.vx = rc_data[TEMP].key[KEY_PRESS].a * 42 - rc_data[TEMP].key[KEY_PRESS].d * 42; // w向前，s向后
-    chassis_cmd_send.vy = rc_data[TEMP].key[KEY_PRESS].w * 42 - rc_data[TEMP].key[KEY_PRESS].s * 42; // a向左，d向右
-    // switch (robot_level)
-    // {
-    //     case 1:
-    //     case 2:
-    //     case 3:
-    //         chassis_cmd_send.vx = (rc_data[TEMP].key[KEY_PRESS].a * 20 - rc_data[TEMP].key[KEY_PRESS].d * 20); // w向前，s向后
-    //         chassis_cmd_send.vy = (rc_data[TEMP].key[KEY_PRESS].w * 20 - rc_data[TEMP].key[KEY_PRESS].s * 20); // a向左，d向右
-    //         break;
-    //     case 4:
-    //     case 5:
-    //     case 6:
-    //     case 7:
-    //         chassis_cmd_send.vx = (rc_data[TEMP].key[KEY_PRESS].a * 30 - rc_data[TEMP].key[KEY_PRESS].d * 30); // w向前，s向后
-    //         chassis_cmd_send.vy = (rc_data[TEMP].key[KEY_PRESS].w * 30 - rc_data[TEMP].key[KEY_PRESS].s * 30); // a向左，d向右
-    //         break;
-    //     default:
-    //         chassis_cmd_send.vx = (rc_data[TEMP].key[KEY_PRESS].a * 40 - rc_data[TEMP].key[KEY_PRESS].d * 40); // w向前，s向后
-    //         chassis_cmd_send.vy = (rc_data[TEMP].key[KEY_PRESS].w * 40 - rc_data[TEMP].key[KEY_PRESS].s * 40); // a向左，d向右
-    //         break;
-    // }
-    // 根据等级设置底盘速度
-    // if (robot_level >= 1 && robot_level <= 3) {
-    //     chassis_cmd_send.vx = (rc_data[TEMP].key[KEY_PRESS].a * 20 - rc_data[TEMP].key[KEY_PRESS].d * 20); // w向前，s向后
-    //     chassis_cmd_send.vy = (rc_data[TEMP].key[KEY_PRESS].w * 20 - rc_data[TEMP].key[KEY_PRESS].s * 20); // a向左，d向右
-    // } else if (robot_level >= 4 && robot_level <= 7) {
-    //     chassis_cmd_send.vx = (rc_data[TEMP].key[KEY_PRESS].a * 30 - rc_data[TEMP].key[KEY_PRESS].d * 30); // w向前，s向后
-    //     chassis_cmd_send.vy = (rc_data[TEMP].key[KEY_PRESS].w * 30 - rc_data[TEMP].key[KEY_PRESS].s * 30); // a向左，d向右
-    // } else {
-    //     chassis_cmd_send.vx = (rc_data[TEMP].key[KEY_PRESS].a * 40 - rc_data[TEMP].key[KEY_PRESS].d * 40); // w向前，s向后
-    //     chassis_cmd_send.vy = (rc_data[TEMP].key[KEY_PRESS].w * 40 - rc_data[TEMP].key[KEY_PRESS].s * 40); // a向左，d向右
-    // }
-
-    // chassis_cmd_send.vx = rc_data[TEMP].key[KEY_PRESS].w * 300 - rc_data[TEMP].key[KEY_PRESS].s * 300; // 系数待测
-    // chassis_cmd_send.vy = rc_data[TEMP].key[KEY_PRESS].s * 300 - rc_data[TEMP].key[KEY_PRESS].d * 300;
-    //chassis_cmd_send.vx = (rc_data[TEMP].key[KEY_PRESS].a * 27 - rc_data[TEMP].key[KEY_PRESS].d * 27); // w向前，s向后
-    //chassis_cmd_send.vy = (rc_data[TEMP].key[KEY_PRESS].w * 27 - rc_data[TEMP].key[KEY_PRESS].s * 27); // a向左，d向右
 
     gimbal_cmd_send.yaw += (float)rc_data[TEMP].mouse.x / 660 * 10; // 系数待测
-    gimbal_cmd_send.pitch += (float)rc_data[TEMP].mouse.y / 660 * 8;
+    gimbal_cmd_send.pitch += (float)rc_data[TEMP].mouse.y / 660 * 10;
 
-    // 云台软件限位1
+    switch (rc_data[TEMP].key_count[KEY_PRESS][Key_Z] % 3) // Z键设置弹速
-    if (gimbal_cmd_send.pitch > PITCH_MAX_ANGLE)
-        gimbal_cmd_send.pitch = PITCH_MAX_ANGLE;
-    else if (gimbal_cmd_send.pitch < PITCH_MIN_ANGLE)
-        gimbal_cmd_send.pitch = PITCH_MIN_ANGLE;
-
-    switch (rc_data[TEMP].key_count[KEY_PRESS][Key_Z] % 3) // Z键设置弹速/1
     {
     case 0:
         shoot_cmd_send.bullet_speed = 15;
@@ -332,45 +255,20 @@ static void MouseKeySet()
         shoot_cmd_send.bullet_speed = 30;
         break;
     }
-    // switch (rc_data[TEMP].key_count[KEY_PRESS][Key_E] % 4) // E键设置发射模式
+    switch (rc_data[TEMP].key_count[KEY_PRESS][Key_E] % 4) // E键设置发射模式
-    // {
+    {
-    // case 0:
+    case 0:
-    //     shoot_cmd_send.load_mode = LOAD_STOP;
+        shoot_cmd_send.load_mode = LOAD_STOP;
-    //     break;
+        break;
-    // case 1:
+    case 1:
-    //     shoot_cmd_send.load_mode = LOAD_1_BULLET;
+        shoot_cmd_send.load_mode = LOAD_1_BULLET;
-    //     break;
+        break;
-    // case 2:
+    case 2:
-    //     shoot_cmd_send.load_mode = LOAD_3_BULLET;
+        shoot_cmd_send.load_mode = LOAD_3_BULLET;
-    //     break;
+        break;
-    // default:
+    default:
-    //     shoot_cmd_send.load_mode = LOAD_BURSTFIRE;
+        shoot_cmd_send.load_mode = LOAD_BURSTFIRE;
-    //     break;
+        break;
-    // }
-    // switch (rc_data[TEMP].mouse.press_l) // 鼠标左键射击
-    // {
-    //     case 0:
-    //         shoot_cmd_send.load_mode = LOAD_STOP;
-    //         break;
-    //     default:
-    //         shoot_cmd_send.load_mode = LOAD_1_BULLET; // 按鼠标进行单发
-    //         break;
-    // }
-    // switch (rc_data[TEMP].mouse.press_r) // 鼠标右键射击
-    // {
-    //     case 0:
-    //         shoot_cmd_send.load_mode = LOAD_STOP;
-    //         break;
-    //     default:
-    //         shoot_cmd_send.load_mode = LOAD_3_BULLET; // 按鼠标进行单发
-    //         break;
-    // }
-    if (rc_data[TEMP].mouse.press_l) {
-        shoot_cmd_send.load_mode = LOAD_BURSTFIRE; // 左键单发
-    } else if (rc_data[TEMP].mouse.press_r) {
-        shoot_cmd_send.load_mode = LOAD_3_BULLET; // 右键三连发
-    } else {
-        shoot_cmd_send.load_mode = LOAD_STOP; // 不按鼠标不发射
     }
     switch (rc_data[TEMP].key_count[KEY_PRESS][Key_R] % 2) // R键开关弹舱
     {
@@ -405,18 +303,7 @@ static void MouseKeySet()
         chassis_cmd_send.chassis_speed_buff = 100;
         break;
     }
-    switch (rc_data[TEMP].key_count[KEY_PRESS][Key_Q] % 2) // Q键设置底盘运动模式
+    switch (rc_data[TEMP].key[KEY_PRESS].shift) // 待添加 按shift允许超功率 消耗缓冲能量
-    {
-        case 0:
-            chassis_cmd_send.offset_angle =  chassis_cmd_send.offset_angle - 360*around;
-            chassis_cmd_send.chassis_mode = CHASSIS_FOLLOW_GIMBAL_YAW;
-            break;
-        default:
-            chassis_cmd_send.chassis_mode = CHASSIS_ROTATE;
-            around= chassis_cmd_send.offset_angle/360;
-            break;
-    }
-    switch (rc_data[TEMP].key[KEY_PRESS].shift) // 待添加 按shift允许超功率 消耗缓冲能量。
     {
     case 1:
 
@@ -429,9 +316,6 @@ static void MouseKeySet()
 }
 
 /**
- *
- *
- *
  * @brief  紧急停止,包括遥控器左上侧拨轮打满/重要模块离线/双板通信失效等
  *         停止的阈值'300'待修改成合适的值,或改为开关控制.
  *
@@ -445,8 +329,6 @@ static void EmergencyHandler()
     {
         robot_state = ROBOT_STOP;
         gimbal_cmd_send.gimbal_mode = GIMBAL_ZERO_FORCE;
-        gimbal_cmd_send.yaw = -gimbal_fetch_data.gimbal_imu_data.YawTotalAngle;;//0
-        gimbal_cmd_send.pitch = 0;
         chassis_cmd_send.chassis_mode = CHASSIS_ZERO_FORCE;
         shoot_cmd_send.shoot_mode = SHOOT_OFF;
         shoot_cmd_send.friction_mode = FRICTION_OFF;
@@ -463,7 +345,8 @@ static void EmergencyHandler()
 }
 
 /* 机器人核心控制任务,200Hz频率运行(必须高于视觉发送频率) */
-void RobotCMDTask() {
+void RobotCMDTask()
+{
     // 从其他应用获取回传数据
 #ifdef ONE_BOARD
     SubGetMessage(chassis_feed_sub, (void *)&chassis_fetch_data);
@@ -477,25 +360,11 @@ void RobotCMDTask() {
     // 根据gimbal的反馈值计算云台和底盘正方向的夹角,不需要传参,通过static私有变量完成
     CalcOffsetAngle();
     // 根据遥控器左侧开关,确定当前使用的控制模式为遥控器调试还是键鼠
-    if (switch_is_down(rc_data[TEMP].rc.switch_left)){ // 遥控器左侧开关状态为[下],遥控器控制
+    if (switch_is_down(rc_data[TEMP].rc.switch_left)) // 遥控器左侧开关状态为[下],遥控器控制
         RemoteControlSet();
-        shoot_cmd_send.shoot_mode =SHOOT_ON;
+    else if (switch_is_up(rc_data[TEMP].rc.switch_left)) // 遥控器左侧开关状态为[上],键盘控制
-        shoot_cmd_send.friction_mode = FRICTION_OFF;
-    }
-    else if (switch_is_up(rc_data[TEMP].rc.switch_left)) {
-        // 遥控器左侧开关状态为[上],键盘控制
         MouseKeySet();
-        shoot_cmd_send.shoot_mode =SHOOT_ON;
+
-    }
-    else if (switch_is_mid(rc_data[TEMP].rc.switch_left)) {
-        // 遥控器左侧开关状态为[中],视觉模式，使用遥控器控制底盘和云台，同时开启发射系统
-        RemoteControlSet();
-        gimbal_cmd_send.yaw += 0.005f * (float)rc_data[TEMP].rc.rocker_l_;
-        gimbal_cmd_send.pitch += 0.001f * (float)rc_data[TEMP].rc.rocker_l1;
-        shoot_cmd_send.shoot_mode =SHOOT_ON;
-        shoot_cmd_send.bullet_speed = 30;
-        shoot_cmd_send.friction_mode = FRICTION_ON;
-    }
     EmergencyHandler(); // 处理模块离线和遥控器急停等紧急情况
 
     // 设置视觉发送数据,还需增加加速度和角速度数据
@@ -512,4 +381,4 @@ void RobotCMDTask() {
     PubPushMessage(shoot_cmd_pub, (void *)&shoot_cmd_send);
     PubPushMessage(gimbal_cmd_pub, (void *)&gimbal_cmd_send);
     // VisionSend(&vision_send_data);
-}
+}

application/gimbal/gimbal.c

@@ -14,9 +14,7 @@ static Publisher_t *gimbal_pub;                   // 云台应用消息发布者
 static Subscriber_t *gimbal_sub;                  // cmd控制消息订阅者
 static Gimbal_Upload_Data_s gimbal_feedback_data; // 回传给cmd的云台状态信息
 static Gimbal_Ctrl_Cmd_s gimbal_cmd_recv;         // 来自cmd的控制信息
-static float last_yaw_angle = 0.0f;   // 保护模式前的yaw角度
+
-// static float last_pitch_angle = 0.0f; // 保护模式前的pitch角度
-uint8_t in_protection_mode = 0; // 是否在保护模式
 void GimbalInit()
 {
     gimba_IMU_data = INS_Init(); // IMU先初始化,获取姿态数据指针赋给yaw电机的其他数据来源
@@ -28,10 +26,10 @@ void GimbalInit()
         },
         .controller_param_init_config = {
             .angle_PID = {
-                //.Kp = 0.685, // 8
+                //.Kp = 0.785, // 8
-                .Kp = 0.585, // 8
+                .Kp = 3, // 8
                 //.Ki = 0.315,
-                .Ki = 0.25,
+                .Ki = 0.45,
                 .Kd = 0.03,
                 //.DeadBand = 0.1
                 .Improve = PID_Trapezoid_Intergral | PID_Integral_Limit | PID_Derivative_On_Measurement | PID_DerivativeFilter | PID_ChangingIntegrationRate,
@@ -42,9 +40,9 @@ void GimbalInit()
                 .Derivative_LPF_RC = 0.001
             },
             .speed_PID = {
-               .Kp = 8000,  // 50
+               .Kp = 500,  // 50
                 //.Kp = 5000,  // 50
-                .Ki = 5000, // 200
+                .Ki = 2000, // 200
                 .Kd = 0,
                 .CoefB = 1,
                 .CoefA = 10,
@@ -68,45 +66,24 @@ void GimbalInit()
     Motor_Init_Config_s pitch_config = {
         .can_init_config = {
             .can_handle = &hcan2,
-            .tx_id = 2,//2
+            .tx_id = 4,//2
         },
-        // .controller_param_init_config = {
-        //     .angle_PID = {
-        //         .Kp = 40, // 10
-        //         .Ki = 0,
-        //         .Kd = 0,
-        //         .MaxOut = 1000,
-        //     },
-        //     .speed_PID = {
-        //         .Kp = 60,  // 50
-        //         .Ki = 15, // 350
-        //         .Kd = 0.6,   // 0
-        //         .MaxOut = 20000,//20000
-        //     },
         .controller_param_init_config = {
             .angle_PID = {
-                .Kp = 0.53, //0.55
+                .Kp = 10, // 10
-                .Ki = 0.1,//0.05
+                .Ki = 0,
-                .Kd = 0.0148,//0.02
+                .Kd = 0,
-                .CoefA =0.5,//0.5
+                .Improve = PID_Trapezoid_Intergral | PID_Integral_Limit | PID_Derivative_On_Measurement,
-                .CoefB = 0.6,//0.6
+                .IntegralLimit = 100,
-                .Output_LPF_RC = 0.0068,
+                .MaxOut = 500,
-                .DeadBand = 0.005,//0.02
-                .Derivative_LPF_RC=0.01,//0.008
-                .Improve = PID_Trapezoid_Intergral |PID_ChangingIntegrationRate| PID_Integral_Limit |PID_Derivative_On_Measurement |  PID_OutputFilter |PID_DerivativeFilter,
-                .IntegralLimit = 1,
-                .MaxOut = 600,
             },
             .speed_PID = {
-                .Kp = 3400,//22000
+                .Kp = 50,  // 50
-                .Ki = 15,//
+                .Ki = 350, // 350
-                .Kd =1,
+                .Kd = 0,   // 0
-                 .CoefA = 0.8,
+                .Improve = PID_Trapezoid_Intergral | PID_Integral_Limit | PID_Derivative_On_Measurement,
-                 .CoefB = 0.1,
+                .IntegralLimit = 2500,
-                .Output_LPF_RC = 0.002,//0.002
+                .MaxOut = 8000,//20000
-                .Improve = PID_Trapezoid_Intergral |PID_Integral_Limit |PID_Derivative_On_Measurement |  PID_OutputFilter,
-                .IntegralLimit = 6000,
-                .MaxOut = 30000,
             },
             .other_angle_feedback_ptr = &gimba_IMU_data->Pitch,
             // 还需要增加角速度额外反馈指针,注意方向,ins_task.md中有c板的bodyframe坐标系说明
@@ -117,12 +94,9 @@ void GimbalInit()
             .speed_feedback_source = OTHER_FEED,
             .outer_loop_type = ANGLE_LOOP,
             .close_loop_type = SPEED_LOOP | ANGLE_LOOP,
-            // .outer_loop_type = SPEED_LOOP,//调试用
-            // .close_loop_type = SPEED_LOOP,
             .motor_reverse_flag = MOTOR_DIRECTION_NORMAL,
         },
-
+        .motor_type = DM4310,
-        .motor_type = GM6020,
     };
     // 电机对total_angle闭环,上电时为零,会保持静止,收到遥控器数据再动
     yaw_motor = DJIMotorInit(&yaw_config);
@@ -145,25 +119,11 @@ void GimbalTask()
     {
     // 停止
     case GIMBAL_ZERO_FORCE:
-        // 进入保护模式时记录当前角度
-        if (!in_protection_mode) {
-            last_yaw_angle = gimba_IMU_data->YawTotalAngle;
-            // last_pitch_angle = gimba_IMU_data->Pitch;
-            in_protection_mode = 1;
-        }
         DJIMotorStop(yaw_motor);
         DJIMotorStop(pitch_motor);
         break;
     // 使用陀螺仪的反馈,底盘根据yaw电机的offset跟随云台或视觉模式采用
     case GIMBAL_GYRO_MODE: // 后续只保留此模式
-        // 从保护模式退出时
-        if (in_protection_mode) {
-            // 计算零飘导致的角度误差
-            float angle_error = gimba_IMU_data->YawTotalAngle - last_yaw_angle;
-            // 补偿目标角度，避免突然旋转
-                   gimbal_cmd_recv.yaw -= angle_error;
-            in_protection_mode = 0;
-        }
         DJIMotorEnable(yaw_motor);
         DJIMotorEnable(pitch_motor);
         DJIMotorChangeFeed(yaw_motor, ANGLE_LOOP, OTHER_FEED);
@@ -172,7 +132,18 @@ void GimbalTask()
         DJIMotorChangeFeed(pitch_motor, SPEED_LOOP, OTHER_FEED);
         DJIMotorSetRef(yaw_motor, gimbal_cmd_recv.yaw); // yaw和pitch会在robot_cmd中处理好多圈和单圈
         DJIMotorSetRef(pitch_motor, gimbal_cmd_recv.pitch);
-        break;
+            // // 根据底盘速度进行补偿，保持云台稳定
+            // // 这里简化处理，实际应用中可能需要更复杂的补偿算法
+            // float yaw_ref = gimbal_cmd_recv.yaw;
+            // float pitch_ref = gimbal_cmd_recv.pitch;
+            //
+            // // 当底盘移动时，云台需要保持相对稳定
+            // // 这里可以根据底盘速度调整云台的控制参考值
+            // // 例如，当底盘向前移动时，云台可能需要稍微向后调整以保持稳定
+            //
+            // DJIMotorSetRef(yaw_motor, yaw_ref); // yaw和pitch会在robot_cmd中处理好多圈和单圈
+            // DJIMotorSetRef(pitch_motor, pitch_ref);
+            break;
     // 云台自由模式,使用编码器反馈,底盘和云台分离,仅云台旋转,一般用于调整云台姿态(英雄吊射等)/能量机关
     case GIMBAL_FREE_MODE: // 后续删除,或加入云台追地盘的跟随模式(响应速度更快)
         DJIMotorEnable(yaw_motor);
@@ -199,4 +170,13 @@ void GimbalTask()
     // gimbal_feedback_data.yaw_motor_total_angle = gimba_IMU_data->YawTotalAngle;
     // 推送消息
     PubPushMessage(gimbal_pub, (void *)&gimbal_feedback_data);
-}
+}
+// /**
+//  * @brief 获取云台IMU数据指针
+//  *
+//  * @return attitude_t* 云台IMU数据指针
+//  */
+// attitude_t *GetGimbalIMUData()
+// {
+//     return gimba_IMU_data;
+// }

application/gimbal/gimbal.h

@@ -1,6 +1,6 @@
 #ifndef GIMBAL_H
 #define GIMBAL_H
-
+#include "../modules/imu/ins_task.h"
 /**
  * @brief 初始化云台,会被RobotInit()调用
  * 
@@ -9,8 +9,8 @@ void GimbalInit();
 
 /**
  * @brief 云台任务
- * 
+ * @return attitude_t* 云台IMU数据指针
  */
 void GimbalTask();
-
+//attitude_t *GetGimbalIMUData();
 #endif // GIMBAL_H

application/robot_def.h

@@ -26,24 +26,24 @@
 
 /* 机器人重要参数定义,注意根据不同机器人进行修改,浮点数需要以.0或f结尾,无符号以u结尾 */
 // 云台参数
-#define YAW_CHASSIS_ALIGN_ECD -3595  // 云台和底盘对齐指向相同方向时的电机编码器值,若对云台有机械改动需要修改
+#define YAW_CHASSIS_ALIGN_ECD 1190  // 云台和底盘对齐指向相同方向时的电机编码器值,若对云台有机械改动需要修改
 #define YAW_ECD_GREATER_THAN_4096 0 // ALIGN_ECD值是否大于4096,是为1,否为0;用于计算云台偏转角度
 #define PITCH_HORIZON_ECD 3412      // 云台处于水平位置时编码器值,若对云台有机械改动需要修改
-#define PITCH_MAX_ANGLE 30           // 云台竖直方向最大角度 (注意反馈如果是陀螺仪，则填写陀螺仪的角度)
+#define PITCH_MAX_ANGLE 0           // 云台竖直方向最大角度 (注意反馈如果是陀螺仪，则填写陀螺仪的角度)
-#define PITCH_MIN_ANGLE -20           // 云台竖直方向最小角度 (注意反馈如果是陀螺仪，则填写陀螺仪的角度)
+#define PITCH_MIN_ANGLE 0           // 云台竖直方向最小角度 (注意反馈如果是陀螺仪，则填写陀螺仪的角度)
 // 底盘参数
 // #define CHASSIS_OMNI_WHEEL // 是否为全向轮底盘
 // #define CHASSIS_MCNAMEE_WHEEL     // 是否为麦克纳姆轮底盘
 #define CHASSIS_STEERING_WHEEL               // 是否为舵轮
-#define STEERING_CHASSIS_ALIGN_ECD_RF   7066 // 舵电机 A 编码器值，若有机械改动需要修改
+#define STEERING_CHASSIS_ALIGN_ECD_RF   7367 // 舵电机 A 编码器值，若有机械改动需要修改
-#define STEERING_CHASSIS_ALIGN_ECD_LB  7138 // 舵电机 D 编码器值，若有机械改动需要修改
+#define STEERING_CHASSIS_ALIGN_ECD_LB  1195 // 舵电机 D 编码器值，若有机械改动需要修改
 
 #define STEERING_CHASSIS_ALIGN_ANGLE_RF STEERING_CHASSIS_ALIGN_ECD_RF / 8192.f * 360.f // 舵轮 A 对齐角度
 #define STEERING_CHASSIS_ALIGN_ANGLE_LB STEERING_CHASSIS_ALIGN_ECD_LB / 8192.f * 360.f // 舵轮 D 对齐角度
 // 发射参数
-#define ONE_BULLET_DELTA_ANGLE 51.0f    // 发射一发弹丸拨盘转动的距离,由机械设计图纸给出
+#define ONE_BULLET_DELTA_ANGLE 36    // 发射一发弹丸拨盘转动的距离,由机械设计图纸给出
-#define REDUCTION_RATIO_LOADER 36.0f // 拨盘电机的减速比,英雄需要修改为3508的19.0f
+#define REDUCTION_RATIO_LOADER 49.0f // 拨盘电机的减速比,英雄需要修改为3508的19.0f
-#define NUM_PER_CIRCLE 7            // 拨盘一圈的装载量
+#define NUM_PER_CIRCLE 10            // 拨盘一圈的装载量
 // 机器人底盘修改的参数,单位为mm(毫米)
 #define WHEEL_BASE 350              // 纵向轴距(前进后退方向)
 #define TRACK_WIDTH 300             // 横向轮距(左右平移方向)
@@ -154,7 +154,7 @@ typedef struct
     chassis_mode_e chassis_mode;
     int chassis_speed_buff;
     // UI部分
-    uint8_t robot_level; // 机器人等级
+    //  ...
 
 } Chassis_Ctrl_Cmd_s;
 
@@ -178,7 +178,6 @@ typedef struct
     Bullet_Speed_e bullet_speed; // 弹速枚举
     uint8_t rest_heat;
     float shoot_rate; // 连续发射的射频,unit per s,发/秒
-    float dead_time;  // 每发弹丸的间隔时间,unit ms,毫秒
 } Shoot_Ctrl_Cmd_s;
 
 /* ----------------gimbal/shoot/chassis发布的反馈数据----------------*/
@@ -208,8 +207,7 @@ typedef struct
 {
     attitude_t gimbal_imu_data;
     uint16_t yaw_motor_single_round_angle;
-    //uint16_t yaw_motor_total_angle;
+    uint16_t yaw_motor_total_angle;
-    float yaw_motor_total_angle;
 } Gimbal_Upload_Data_s;
 
 typedef struct

application/shoot/shoot.c

@@ -17,7 +17,7 @@ static Shoot_Upload_Data_s shoot_feedback_data; // 来自cmd的发射控制信
 
 // dwt定时,计算冷却用
 static float hibernate_time = 0, dead_time = 0;
-//static float target_angle = 0;
+
 void ShootInit()
 {
     // 左摩擦轮
@@ -27,16 +27,16 @@ void ShootInit()
         },
         .controller_param_init_config = {
             .speed_PID = {
-                .Kp = 20, // 20
+                .Kp = 0, // 20
-                .Ki = 1, // 1
+                .Ki = 0, // 1
                 .Kd = 0,
                 .Improve = PID_Integral_Limit,
                 .IntegralLimit = 10000,
                 .MaxOut = 15000,
             },
             .current_PID = {
-                .Kp = 0.7, // 0.7
+                .Kp = 0, // 0.7
-                .Ki = 0.1, // 0.1
+                .Ki = 0, // 0.1
                 .Kd = 0,
                 .Improve = PID_Integral_Limit,
                 .IntegralLimit = 10000,
@@ -52,49 +52,49 @@ void ShootInit()
             .motor_reverse_flag = MOTOR_DIRECTION_NORMAL,
         },
         .motor_type = M3508};
-    friction_config.can_init_config.tx_id = 5,
+    friction_config.can_init_config.tx_id = 1,
-    friction_r = DJIMotorInit(&friction_config);
-
-    friction_config.can_init_config.tx_id = 8; // 左摩擦轮,改txid和方向就行
-    friction_config.controller_setting_init_config.motor_reverse_flag = MOTOR_DIRECTION_REVERSE;
     friction_l = DJIMotorInit(&friction_config);
 
+    friction_config.can_init_config.tx_id = 2; // 右摩擦轮,改txid和方向就行
+    friction_config.controller_setting_init_config.motor_reverse_flag = MOTOR_DIRECTION_REVERSE;
+    friction_r = DJIMotorInit(&friction_config);
+
     // 拨盘电机
     Motor_Init_Config_s loader_config = {
         .can_init_config = {
             .can_handle = &hcan2,
-            .tx_id = 7,
+            .tx_id = 5,
         },
         .controller_param_init_config = {
             .angle_PID = {
                 // 如果启用位置环来控制发弹,需要较大的I值保证输出力矩的线性度否则出现接近拨出的力矩大幅下降
-                .Kp = 12, // 10
+                .Kp = 0, // 10
-                .Ki = 5,
+                .Ki = 0,
                 .Kd = 0,
-                .MaxOut = 10000,
+                .MaxOut = 200,
             },
             .speed_PID = {
-                .Kp = 3, // 10
+                .Kp = 0, // 10
-                .Ki = 10, // 1
+                .Ki = 0, // 1
                 .Kd = 0,
                 .Improve = PID_Integral_Limit,
-                .IntegralLimit = 250,
+                .IntegralLimit = 5000,
-                .MaxOut = 10000,
+                .MaxOut = 5000,
             },
             .current_PID = {
-                .Kp = 1.5, // 0.7
+                .Kp = 0, // 0.7
                 .Ki = 0, // 0.1
                 .Kd = 0,
                 .Improve = PID_Integral_Limit,
                 .IntegralLimit = 5000,
-                .MaxOut = 10000,
+                .MaxOut = 5000,
             },
         },
         .controller_setting_init_config = {
             .angle_feedback_source = MOTOR_FEED, .speed_feedback_source = MOTOR_FEED,
             .outer_loop_type = SPEED_LOOP, // 初始化成SPEED_LOOP,让拨盘停在原地,防止拨盘上电时乱转
-            .close_loop_type = ANGLE_LOOP | SPEED_LOOP|CURRENT_LOOP,
+            .close_loop_type = CURRENT_LOOP | SPEED_LOOP,
-            .motor_reverse_flag = MOTOR_DIRECTION_REVERSE, // 注意方向设置为拨盘的拨出的击发方向
+            .motor_reverse_flag = MOTOR_DIRECTION_NORMAL, // 注意方向设置为拨盘的拨出的击发方向
         },
         .motor_type = M2006 // 英雄使用m3508
     };
@@ -126,8 +126,8 @@ void ShootTask()
 
     // 如果上一次触发单发或3发指令的时间加上不应期仍然大于当前时间(尚未休眠完毕),直接返回即可
     // 单发模式主要提供给能量机关激活使用(以及英雄的射击大部分处于单发)
-     if (hibernate_time + dead_time > DWT_GetTimeline_ms())
+    // if (hibernate_time + dead_time > DWT_GetTimeline_ms())
-         return;
+    //     return;
 
     // 若不在休眠状态,根据robotCMD传来的控制模式进行拨盘电机参考值设定和模式切换
     switch (shoot_cmd_recv.load_mode)
@@ -138,52 +138,19 @@ void ShootTask()
         DJIMotorSetRef(loader, 0);             // 同时设定参考值为0,这样停止的速度最快
         break;
     // 单发模式,根据鼠标按下的时间,触发一次之后需要进入不响应输入的状态(否则按下的时间内可能多次进入,导致多次发射)
-        // case LOAD_1_BULLET:
+    case LOAD_1_BULLET:                                                                     // 激活能量机关/干扰对方用,英雄用.
-        //     DJIMotorOuterLoop(loader, ANGLE_LOOP);  // 切换到角度环
+        DJIMotorOuterLoop(loader, ANGLE_LOOP);                                              // 切换到角度环
-        //     static float last_target_angle = 0; // 存储上次的目标角度
+        DJIMotorSetRef(loader, loader->measure.total_angle + ONE_BULLET_DELTA_ANGLE); // 控制量增加一发弹丸的角度
-        //     if (dead_time == 0) { // 第一次触发
+        hibernate_time = DWT_GetTimeline_ms();                                              // 记录触发指令的时间
-        //         last_target_angle = loader->measure.total_angle;
+        dead_time = 150;                                                                    // 完成1发弹丸发射的时间
-        //     }
+        break;
-        //     last_target_angle += 51*36;//ONE_BULLET_DELTA_ANGLE * REDUCTION_RATIO_LOADER; // 每次都在上次目标角度基础上增加固定角度
-        //     DJIMotorSetRef(loader, last_target_angle);
-        //     hibernate_time = DWT_GetTimeline_ms();     // 记录触发指令的时间
-        //     dead_time      = 450;//shoot_cmd_recv.dead_time; // 完成1发弹丸发射的时间
-        //     break;
-        // case LOAD_1_BULLET:
-            // DJIMotorOuterLoop(loader, ANGLE_LOOP);// 切换到角度环
-            // DJIMotorSetRef(loader, loader->measure.total_angle+51*36);
-            // //DJIMotorSetRef(loader, loader->measure.total_angle + ONE_BULLET_DELTA_ANGLE);
-            // // 控制量增加一发弹丸的角度，其中90为36减速比*1.5
-            // hibernate_time = DWT_GetTimeline_ms();     // 记录触发指令的时间
-            //     dead_time      = 1000; // 完成1发弹丸发射的时间
-            // // 记录触发指令的时间
-            // //dead_time = 500;
-            // // 完成1发弹丸发射的时间
-            // break;
-        case LOAD_1_BULLET:
-            DJIMotorOuterLoop(loader, ANGLE_LOOP);// 切换到角度环
-            static float target_angle = -1900;
-            target_angle += 51.2*36;
-            //float target_angle = loader->measure.total_angle + 51*36;
-            DJIMotorSetRef(loader, target_angle);
-            hibernate_time = DWT_GetTimeline_ms();     // 记录触发指令的时间
-            dead_time      = 450; // 完成1发弹丸发射的时间
-            break;
     // 三连发,如果不需要后续可能删除
     case LOAD_3_BULLET:
-        // DJIMotorOuterLoop(loader, ANGLE_LOOP);                                                  // 切换到速度环
+        DJIMotorOuterLoop(loader, ANGLE_LOOP);                                                  // 切换到速度环
-        // DJIMotorSetRef(loader, loader->measure.total_angle + 3 * ONE_BULLET_DELTA_ANGLE); // 增加3发
+        DJIMotorSetRef(loader, loader->measure.total_angle + 3 * ONE_BULLET_DELTA_ANGLE); // 增加3发
-        // hibernate_time = DWT_GetTimeline_ms();                                                  // 记录触发指令的时间
+        hibernate_time = DWT_GetTimeline_ms();                                                  // 记录触发指令的时间
-        // dead_time = 300;                                                                        // 完成3发弹丸发射的时间
+        dead_time = 300;                                                                        // 完成3发弹丸发射的时间
-        // break;
+        break;
-            DJIMotorOuterLoop(loader, ANGLE_LOOP);// 切换到角度环.
-            //static float target_angle = -1872;
-            target_angle += (51.2*36)*3;
-            //float target_angle = loader->measure.total_angle + 51*36;
-            DJIMotorSetRef(loader, target_angle);
-            hibernate_time = DWT_GetTimeline_ms();     // 记录触发指令的时间
-            dead_time      = 700; // 完成3发弹丸发射的时间
-            break;
     // 连发模式,对速度闭环,射频后续修改为可变,目前固定为1Hz
     case LOAD_BURSTFIRE:
         DJIMotorOuterLoop(loader, SPEED_LOOP);
@@ -208,16 +175,16 @@ void ShootTask()
         switch (shoot_cmd_recv.bullet_speed)
         {
         case SMALL_AMU_15:
-            DJIMotorSetRef(friction_l, 30000);
+            DJIMotorSetRef(friction_l, 0);
-            DJIMotorSetRef(friction_r, 30000);
+            DJIMotorSetRef(friction_r, 0);
             break;
         case SMALL_AMU_18:
-            DJIMotorSetRef(friction_l, 30000);
+            DJIMotorSetRef(friction_l, 0);
-            DJIMotorSetRef(friction_r, 30000);
+            DJIMotorSetRef(friction_r, 0);
             break;
         case SMALL_AMU_30:
-            DJIMotorSetRef(friction_l, 50000);
+            DJIMotorSetRef(friction_l, 0);
-            DJIMotorSetRef(friction_r, 50000);
+            DJIMotorSetRef(friction_r, 0);
             break;
         default: // 当前为了调试设定的默认值4000,因为还没有加入裁判系统无法读取弹速.
             DJIMotorSetRef(friction_l, 30000);

modules/algorithm/QuaternionEKF.c

@@ -199,8 +199,8 @@ void IMU_QuaternionEKF_Update(float gx, float gy, float gz, float ax, float ay,
 
     // 利用四元数反解欧拉角
     QEKF_INS.Yaw = atan2f(2.0f * (QEKF_INS.q[0] * QEKF_INS.q[3] + QEKF_INS.q[1] * QEKF_INS.q[2]), 2.0f * (QEKF_INS.q[0] * QEKF_INS.q[0] + QEKF_INS.q[1] * QEKF_INS.q[1]) - 1.0f) * 57.295779513f;
-    QEKF_INS.Pitch = -asinf(-2.0f * (QEKF_INS.q[1] * QEKF_INS.q[3] - QEKF_INS.q[0] * QEKF_INS.q[2])) * 57.295779513f;
+    QEKF_INS.Pitch = atan2f(2.0f * (QEKF_INS.q[0] * QEKF_INS.q[1] + QEKF_INS.q[2] * QEKF_INS.q[3]), 2.0f * (QEKF_INS.q[0] * QEKF_INS.q[0] + QEKF_INS.q[3] * QEKF_INS.q[3]) - 1.0f) * 57.295779513f;
-    QEKF_INS.Roll = atan2f(2.0f * (QEKF_INS.q[0] * QEKF_INS.q[1] + QEKF_INS.q[2] * QEKF_INS.q[3]), 2.0f * (QEKF_INS.q[0] * QEKF_INS.q[0] + QEKF_INS.q[3] * QEKF_INS.q[3]) - 1.0f) * 57.295779513f;
+    QEKF_INS.Roll = asinf(-2.0f * (QEKF_INS.q[1] * QEKF_INS.q[3] - QEKF_INS.q[0] * QEKF_INS.q[2])) * 57.295779513f;
 
     // get Yaw total, yaw数据可能会超过360,处理一下方便其他功能使用(如小陀螺)
     if (QEKF_INS.Yaw - QEKF_INS.YawAngleLast > 180.0f)

modules/algorithm/rls.c

@@ -1,99 +0,0 @@
-#include "rls.h"
-
-#include <string.h>
-
-void RLSInit(RLSInstance *rls, uint8_t order, float lambda, float init_covariance, const float *initial_theta)
-{
-    if (rls == 0) {
-        return;
-    }
-
-    memset(rls, 0, sizeof(RLSInstance));
-
-    if (order == 0u) {
-        return;
-    }
-    if (order > RLS_MAX_ORDER) {
-        order = RLS_MAX_ORDER;
-    }
-    if (lambda < 0.01f) {
-        lambda = 0.01f;
-    }
-    if (lambda > 1.0f) {
-        lambda = 1.0f;
-    }
-    if (init_covariance <= 0.0f) {
-        init_covariance = 1000.0f;
-    }
-
-    rls->order = order;
-    rls->lambda = lambda;
-    rls->initialized = 1u;
-
-    for (uint8_t i = 0u; i < order; i++) {
-        rls->theta[i] = initial_theta != 0 ? initial_theta[i] : 0.0f;
-        rls->covariance[i][i] = init_covariance;
-    }
-}
-
-float RLSPredict(const RLSInstance *rls, const float *x)
-{
-    if (rls == 0 || x == 0 || rls->initialized == 0u) {
-        return 0.0f;
-    }
-
-    float prediction = 0.0f;
-    for (uint8_t i = 0u; i < rls->order; i++) {
-        prediction += rls->theta[i] * x[i];
-    }
-    return prediction;
-}
-
-float RLSUpdate(RLSInstance *rls, const float *x, float y)
-{
-    float px[RLS_MAX_ORDER] = {0.0f};
-    float xtp[RLS_MAX_ORDER] = {0.0f};
-
-    if (rls == 0 || x == 0 || rls->initialized == 0u) {
-        return 0.0f;
-    }
-
-    const uint8_t order = rls->order;
-    const float prediction = RLSPredict(rls, x);
-    const float error = y - prediction;
-
-    for (uint8_t i = 0u; i < order; i++) {
-        for (uint8_t j = 0u; j < order; j++) {
-            px[i] += rls->covariance[i][j] * x[j];
-            xtp[i] += x[j] * rls->covariance[j][i];
-        }
-    }
-
-    float denominator = rls->lambda;
-    for (uint8_t i = 0u; i < order; i++) {
-        denominator += x[i] * px[i];
-    }
-    if (denominator <= 1.0e-6f) {
-        denominator = 1.0e-6f;
-    }
-
-    for (uint8_t i = 0u; i < order; i++) {
-        rls->gain[i] = px[i] / denominator;
-        rls->theta[i] += rls->gain[i] * error;
-    }
-
-    for (uint8_t i = 0u; i < order; i++) {
-        for (uint8_t j = 0u; j < order; j++) {
-            rls->covariance[i][j] = (rls->covariance[i][j] - rls->gain[i] * xtp[j]) / rls->lambda;
-        }
-    }
-
-    rls->last_prediction = prediction;
-    rls->last_error = error;
-    return prediction;
-}
-
-const float *RLSGetTheta(const RLSInstance *rls)
-{
-    return rls != 0 ? rls->theta : 0;
-}

modules/algorithm/rls.h

@@ -1,25 +0,0 @@
-#ifndef RLS_H
-#define RLS_H
-
-#include <stdint.h>
-
-#define RLS_MAX_ORDER 4u
-
-typedef struct
-{
-    uint8_t order;
-    uint8_t initialized;
-    float lambda;
-    float theta[RLS_MAX_ORDER];
-    float covariance[RLS_MAX_ORDER][RLS_MAX_ORDER];
-    float gain[RLS_MAX_ORDER];
-    float last_prediction;
-    float last_error;
-} RLSInstance;
-
-void RLSInit(RLSInstance *rls, uint8_t order, float lambda, float init_covariance, const float *initial_theta);
-float RLSPredict(const RLSInstance *rls, const float *x);
-float RLSUpdate(RLSInstance *rls, const float *x, float y);
-const float *RLSGetTheta(const RLSInstance *rls);
-
-#endif

modules/chassis_power/chassis_power.c

@@ -1,279 +0,0 @@
-#include "chassis_power.h"
-
-#include <math.h>
-#include <string.h>
-
-ChassisPower_State_s chassis_power_debug_state;
-
-static float ChassisPowerLimitValue(float value, float min, float max)
-{
-    if (value < min) {
-        return min;
-    }
-    if (value > max) {
-        return max;
-    }
-    return value;
-}
-
-ChassisPowerMotorModel_s ChassisPowerGetDefault3508Model(void)
-{
-    const float it_to_ireal_m3508 = 20.0f / 16384.0f;
-    const float i_to_t_m3508 = 0.3f / (3591.0f / 187.0f);
-    const float it_to_t_m3508 = it_to_ireal_m3508 * i_to_t_m3508;
-
-    ChassisPowerMotorModel_s model = {
-        .k_current_speed = it_to_t_m3508 / 9.55f,
-        .k_speed2 = 1.453e-7f,
-        .k_current2 = 2.53e-7f,
-        .k0 = 4.081f / 4.0f,
-    };
-    return model;
-}
-
-void ChassisPowerInit(ChassisPowerInstance *instance, const ChassisPower_Init_Config_s *config)
-{
-    if (instance == 0) {
-        return;
-    }
-
-    memset(instance, 0, sizeof(ChassisPowerInstance));
-
-    instance->wheel_model = ChassisPowerGetDefault3508Model();
-    instance->default_power_limit = 60.0f;
-    instance->min_power_limit = 20.0f;
-    instance->buffer_low = 30.0f;
-    instance->buffer_high = 50.0f;
-    instance->buffer_gain = 0.25f;
-    instance->steering_power_reserve = 6.0f;
-    instance->min_scale = 0.20f;
-    instance->rls_enable = 0u;
-
-    float lambda = 0.995f;
-    float init_covariance = 1000.0f;
-
-    if (config != 0) {
-        instance->wheel_model = config->wheel_model;
-        if (config->default_power_limit > 0.0f) {
-            instance->default_power_limit = config->default_power_limit;
-        }
-        if (config->min_power_limit > 0.0f) {
-            instance->min_power_limit = config->min_power_limit;
-        }
-        if (config->buffer_low > 0.0f) {
-            instance->buffer_low = config->buffer_low;
-        }
-        if (config->buffer_high > instance->buffer_low) {
-            instance->buffer_high = config->buffer_high;
-        }
-        if (config->buffer_gain > 0.0f) {
-            instance->buffer_gain = config->buffer_gain;
-        }
-        if (config->steering_power_reserve >= 0.0f) {
-            instance->steering_power_reserve = config->steering_power_reserve;
-        }
-        if (config->min_scale > 0.0f && config->min_scale <= 1.0f) {
-            instance->min_scale = config->min_scale;
-        }
-        if (config->rls_lambda > 0.0f) {
-            lambda = config->rls_lambda;
-        }
-        if (config->rls_init_covariance > 0.0f) {
-            init_covariance = config->rls_init_covariance;
-        }
-        instance->rls_enable = config->rls_enable;
-    }
-
-    float theta[CHASSIS_POWER_RLS_ORDER] = {
-        instance->wheel_model.k_current_speed,
-        instance->wheel_model.k_speed2,
-        instance->wheel_model.k_current2,
-        instance->wheel_model.k0 * 2.0f,
-    };
-    RLSInit(&instance->rls, CHASSIS_POWER_RLS_ORDER, lambda, init_covariance, theta);
-    memcpy(instance->state.rls_theta, theta, sizeof(theta));
-}
-
-float ChassisPowerEstimateMotor(const ChassisPowerMotorModel_s *model, float speed, float current_cmd)
-{
-    if (model == 0) {
-        return 0.0f;
-    }
-
-    float power = model->k_current_speed * speed * current_cmd +
-                  model->k_speed2 * speed * speed +
-                  model->k_current2 * current_cmd * current_cmd +
-                  model->k0;
-
-    if (power < 0.0f) {
-        power = 0.0f;
-    }
-    return power;
-}
-
-static float ChassisPowerGetAllowedPower(ChassisPowerInstance *instance, const ChassisPower_Limit_Input_s *input)
-{
-    float allowed = input->referee_limit > 1.0f ? input->referee_limit : instance->default_power_limit;
-
-    if (input->referee_limit > 1.0f) {
-        if (input->power_buffer < instance->buffer_low) {
-            allowed -= (instance->buffer_low - input->power_buffer) * instance->buffer_gain;
-        } else if (input->power_buffer > instance->buffer_high) {
-            allowed += (input->power_buffer - instance->buffer_high) * instance->buffer_gain;
-        }
-    }
-
-    return ChassisPowerLimitValue(allowed, instance->min_power_limit, instance->default_power_limit + 20.0f);
-}
-
-void ChassisPowerUpdateMeasureState(ChassisPowerInstance *instance, const ChassisPower_Limit_Input_s *input)
-{
-    if (instance == 0 || input == 0) {
-        return;
-    }
-
-    ChassisPower_State_s *state = &instance->state;
-    const float rf_power = ChassisPowerEstimateMotor(&instance->wheel_model, input->rf_speed, input->rf_current_cmd);
-    const float lb_power = ChassisPowerEstimateMotor(&instance->wheel_model, input->lb_speed, input->lb_current_cmd);
-
-    state->rf_ref_raw = input->rf_speed_ref;
-    state->lb_ref_raw = input->lb_speed_ref;
-    state->rf_ref_limited = input->rf_speed_ref;
-    state->lb_ref_limited = input->lb_speed_ref;
-    state->rf_power = rf_power;
-    state->lb_power = lb_power;
-    state->estimated_wheel_power = rf_power + lb_power;
-    state->estimated_total_power = state->estimated_wheel_power;
-    state->allowed_power = ChassisPowerGetAllowedPower(instance, input);
-    state->wheel_budget = state->allowed_power;
-    state->scale = 1.0f;
-    state->measured_power = input->measured_power;
-    state->referee_power = input->referee_power;
-    state->power_buffer = input->power_buffer;
-    state->rf_speed = input->rf_speed;
-    state->lb_speed = input->lb_speed;
-    state->rf_current_cmd = input->rf_current_cmd;
-    state->lb_current_cmd = input->lb_current_cmd;
-    state->rf_output_cmd = input->rf_output_cmd;
-    state->lb_output_cmd = input->lb_output_cmd;
-    state->rf_feedback_current = input->rf_feedback_current;
-    state->lb_feedback_current = input->lb_feedback_current;
-    state->power_meter_online = input->power_meter_online;
-    state->limited = 0u;
-
-    state->features[0] = input->rf_speed * input->rf_current_cmd + input->lb_speed * input->lb_current_cmd;
-    state->features[1] = input->rf_speed * input->rf_speed + input->lb_speed * input->lb_speed;
-    state->features[2] = input->rf_current_cmd * input->rf_current_cmd + input->lb_current_cmd * input->lb_current_cmd;
-    state->features[3] = 1.0f;
-    chassis_power_debug_state = *state;
-}
-
-float ChassisPowerLimitWheelRefs(ChassisPowerInstance *instance, const ChassisPower_Limit_Input_s *input, float *rf_ref, float *lb_ref)
-{
-    if (instance == 0 || input == 0 || rf_ref == 0 || lb_ref == 0) {
-        return 1.0f;
-    }
-
-    ChassisPower_State_s *state = &instance->state;
-    const float rf_raw = *rf_ref;
-    const float lb_raw = *lb_ref;
-    const float allowed = ChassisPowerGetAllowedPower(instance, input);
-    float steering_power = input->steering_power_estimate;
-
-    if (steering_power <= 0.0f) {
-        steering_power = instance->steering_power_reserve;
-    }
-
-    const float rf_power = ChassisPowerEstimateMotor(&instance->wheel_model, input->rf_speed, input->rf_current_cmd);
-    const float lb_power = ChassisPowerEstimateMotor(&instance->wheel_model, input->lb_speed, input->lb_current_cmd);
-    const float wheel_power = rf_power + lb_power;
-    const float total_power = wheel_power + steering_power;
-    float wheel_budget = allowed - steering_power;
-    float scale = 1.0f;
-
-    if (wheel_budget < 1.0f) {
-        wheel_budget = 1.0f;
-    }
-
-    if (wheel_power > wheel_budget && wheel_power > 1.0e-3f) {
-        scale = sqrtf(wheel_budget / wheel_power);
-        scale = ChassisPowerLimitValue(scale, instance->min_scale, 1.0f);
-        *rf_ref = rf_raw * scale;
-        *lb_ref = lb_raw * scale;
-        state->limited = 1u;
-    } else {
-        state->limited = 0u;
-    }
-
-    state->rf_ref_raw = rf_raw;
-    state->lb_ref_raw = lb_raw;
-    state->rf_ref_limited = *rf_ref;
-    state->lb_ref_limited = *lb_ref;
-    state->rf_power = rf_power;
-    state->lb_power = lb_power;
-    state->estimated_wheel_power = wheel_power;
-    state->estimated_total_power = total_power;
-    state->allowed_power = allowed;
-    state->wheel_budget = wheel_budget;
-    state->scale = scale;
-    state->measured_power = input->measured_power;
-    state->referee_power = input->referee_power;
-    state->power_buffer = input->power_buffer;
-    state->rf_speed = input->rf_speed;
-    state->lb_speed = input->lb_speed;
-    state->rf_current_cmd = input->rf_current_cmd;
-    state->lb_current_cmd = input->lb_current_cmd;
-    state->rf_output_cmd = input->rf_output_cmd;
-    state->lb_output_cmd = input->lb_output_cmd;
-    state->rf_feedback_current = input->rf_feedback_current;
-    state->lb_feedback_current = input->lb_feedback_current;
-    state->power_meter_online = input->power_meter_online;
-
-    state->features[0] = input->rf_speed * input->rf_current_cmd + input->lb_speed * input->lb_current_cmd;
-    state->features[1] = input->rf_speed * input->rf_speed + input->lb_speed * input->lb_speed;
-    state->features[2] = input->rf_current_cmd * input->rf_current_cmd + input->lb_current_cmd * input->lb_current_cmd;
-    state->features[3] = 1.0f;
-    chassis_power_debug_state = *state;
-
-    return scale;
-}
-
-void ChassisPowerUpdateRLS(ChassisPowerInstance *instance, const ChassisPower_Limit_Input_s *input, float measured_wheel_power)
-{
-    if (instance == 0 || input == 0 || instance->rls_enable == 0u || measured_wheel_power <= 0.0f) {
-        return;
-    }
-
-    float features[CHASSIS_POWER_RLS_ORDER] = {
-        input->rf_speed * input->rf_current_cmd + input->lb_speed * input->lb_current_cmd,
-        input->rf_speed * input->rf_speed + input->lb_speed * input->lb_speed,
-        input->rf_current_cmd * input->rf_current_cmd + input->lb_current_cmd * input->lb_current_cmd,
-        1.0f,
-    };
-
-    RLSUpdate(&instance->rls, features, measured_wheel_power);
-    const float *theta = RLSGetTheta(&instance->rls);
-    if (theta == 0) {
-        return;
-    }
-
-    instance->wheel_model.k_current_speed = theta[0];
-    instance->wheel_model.k_speed2 = theta[1] > 0.0f ? theta[1] : 0.0f;
-    instance->wheel_model.k_current2 = theta[2] > 0.0f ? theta[2] : 0.0f;
-    instance->wheel_model.k0 = theta[3] > 0.0f ? theta[3] * 0.5f : 0.0f;
-    memcpy(instance->state.rls_theta, theta, sizeof(instance->state.rls_theta));
-    chassis_power_debug_state = instance->state;
-}
-
-void ChassisPowerSetWheelModel(ChassisPowerInstance *instance, const ChassisPowerMotorModel_s *model)
-{
-    if (instance == 0 || model == 0) {
-        return;
-    }
-    instance->wheel_model = *model;
-}
-
-const ChassisPower_State_s *ChassisPowerGetState(const ChassisPowerInstance *instance)
-{
-    return instance != 0 ? &instance->state : 0;
-}

modules/chassis_power/chassis_power.h

@@ -1,109 +0,0 @@
-#ifndef CHASSIS_POWER_H
-#define CHASSIS_POWER_H
-
-#include <stdint.h>
-
-#include "rls.h"
-
-#define CHASSIS_POWER_RLS_ORDER 4u
-
-typedef struct
-{
-    float k_current_speed;
-    float k_speed2;
-    float k_current2;
-    float k0;
-} ChassisPowerMotorModel_s;
-
-typedef struct
-{
-    ChassisPowerMotorModel_s wheel_model;
-    float default_power_limit;
-    float min_power_limit;
-    float buffer_low;
-    float buffer_high;
-    float buffer_gain;
-    float steering_power_reserve;
-    float min_scale;
-    float rls_lambda;
-    float rls_init_covariance;
-    uint8_t rls_enable;
-} ChassisPower_Init_Config_s;
-
-typedef struct
-{
-    float rf_speed_ref;
-    float lb_speed_ref;
-    float rf_speed;
-    float lb_speed;
-    float rf_current_cmd;
-    float lb_current_cmd;
-    float rf_output_cmd;
-    float lb_output_cmd;
-    float rf_feedback_current;
-    float lb_feedback_current;
-    float referee_limit;
-    float referee_power;
-    float power_buffer;
-    float measured_power;
-    float steering_power_estimate;
-    uint8_t power_meter_online;
-} ChassisPower_Limit_Input_s;
-
-typedef struct
-{
-    float rf_ref_raw;
-    float lb_ref_raw;
-    float rf_ref_limited;
-    float lb_ref_limited;
-    float rf_power;
-    float lb_power;
-    float estimated_wheel_power;
-    float estimated_total_power;
-    float allowed_power;
-    float wheel_budget;
-    float scale;
-    float measured_power;
-    float referee_power;
-    float power_buffer;
-    float rf_speed;
-    float lb_speed;
-    float rf_current_cmd;
-    float lb_current_cmd;
-    float rf_output_cmd;
-    float lb_output_cmd;
-    float rf_feedback_current;
-    float lb_feedback_current;
-    float features[CHASSIS_POWER_RLS_ORDER];
-    float rls_theta[CHASSIS_POWER_RLS_ORDER];
-    uint8_t limited;
-    uint8_t power_meter_online;
-} ChassisPower_State_s;
-
-typedef struct
-{
-    ChassisPowerMotorModel_s wheel_model;
-    RLSInstance rls;
-    ChassisPower_State_s state;
-    float default_power_limit;
-    float min_power_limit;
-    float buffer_low;
-    float buffer_high;
-    float buffer_gain;
-    float steering_power_reserve;
-    float min_scale;
-    uint8_t rls_enable;
-} ChassisPowerInstance;
-
-extern ChassisPower_State_s chassis_power_debug_state;
-
-ChassisPowerMotorModel_s ChassisPowerGetDefault3508Model(void);
-void ChassisPowerInit(ChassisPowerInstance *instance, const ChassisPower_Init_Config_s *config);
-float ChassisPowerEstimateMotor(const ChassisPowerMotorModel_s *model, float speed, float current_cmd);
-void ChassisPowerUpdateMeasureState(ChassisPowerInstance *instance, const ChassisPower_Limit_Input_s *input);
-float ChassisPowerLimitWheelRefs(ChassisPowerInstance *instance, const ChassisPower_Limit_Input_s *input, float *rf_ref, float *lb_ref);
-void ChassisPowerUpdateRLS(ChassisPowerInstance *instance, const ChassisPower_Limit_Input_s *input, float measured_wheel_power);
-void ChassisPowerSetWheelModel(ChassisPowerInstance *instance, const ChassisPowerMotorModel_s *model);
-const ChassisPower_State_s *ChassisPowerGetState(const ChassisPowerInstance *instance);
-
-#endif

modules/imu/ins_task.c

@@ -135,6 +135,7 @@ void INS_Task(void)
         INS.Gyro[X] = BMI088.Gyro[X];
         INS.Gyro[Y] = BMI088.Gyro[Y];
         INS.Gyro[Z] = BMI088.Gyro[Z];
+
         // demo function,用于修正安装误差,可以不管,本demo暂时没用
         IMU_Param_Correction(&IMU_Param, INS.Gyro, INS.Accel);
 

modules/master_machine/master_process.c

@@ -5,7 +5,7 @@
  * @version beta
  * @date 2022-11-03
  * @todo 增加对串口调试助手协议的支持,包括vofa和serial debug
- * @copyright Copyright (c) 2022
+ * @copyright Copyright (c) 2023
  *
  */
 #include "master_process.h"

modules/motor/DJImotor/dji_motor.c

@@ -24,7 +24,7 @@ static CANInstance sender_assignment[6] = {
     [1] = {.can_handle = &hcan1, .txconf.StdId = 0x200, .txconf.IDE = CAN_ID_STD, .txconf.RTR = CAN_RTR_DATA, .txconf.DLC = 0x08, .tx_buff = {0}},
     [2] = {.can_handle = &hcan1, .txconf.StdId = 0x2ff, .txconf.IDE = CAN_ID_STD, .txconf.RTR = CAN_RTR_DATA, .txconf.DLC = 0x08, .tx_buff = {0}},
     [3] = {.can_handle = &hcan2, .txconf.StdId = 0x1ff, .txconf.IDE = CAN_ID_STD, .txconf.RTR = CAN_RTR_DATA, .txconf.DLC = 0x08, .tx_buff = {0}},
-    [4] = {.can_handle = &hcan2, .txconf.StdId = 0x200, .txconf.IDE = CAN_ID_STD, .txconf.RTR = CAN_RTR_DATA, .txconf.DLC = 0x08, .tx_buff = {0}},
+    [4] = {.can_handle = &hcan2, .txconf.StdId = 0x3FE, .txconf.IDE = CAN_ID_STD, .txconf.RTR = CAN_RTR_DATA, .txconf.DLC = 0x08, .tx_buff = {0}},
     [5] = {.can_handle = &hcan2, .txconf.StdId = 0x2ff, .txconf.IDE = CAN_ID_STD, .txconf.RTR = CAN_RTR_DATA, .txconf.DLC = 0x08, .tx_buff = {0}},
 };
 
@@ -321,15 +321,25 @@ void DJIMotorControl()
         // 获取最终输出
         set = (int16_t)pid_ref;
 
+
         // 分组填入发送数据
         group = motor->sender_group;
         num = motor->message_num;
-        sender_assignment[group].tx_buff[2 * num] = (uint8_t)(set >> 8);         // 低八位
+
-        sender_assignment[group].tx_buff[2 * num + 1] = (uint8_t)(set & 0x00ff); // 高八位
+        if (i == 1)
+        {
+            sender_assignment[4].tx_buff[6] = (uint8_t)(set & 0x00ff); // 高八位
+            sender_assignment[4].tx_buff[7] = (uint8_t)(set >> 8); // 低八位
+        }
+        else
+        {
+            sender_assignment[group].tx_buff[2 * num] = (uint8_t)(set >> 8);         // 低八位
+            sender_assignment[group].tx_buff[2 * num + 1] = (uint8_t)(set & 0x00ff); // 高八位
+        }
 
         // 若该电机处于停止状态,直接将buff置零
         if (motor->stop_flag == MOTOR_STOP)
-            memset(sender_assignment[group].tx_buff + 2 * num, 0, sizeof(uint16_t));
+            memset(sender_assignment[group].tx_buff + 2 * num, 0, 2u);
     }
 
     // 遍历flag,检查是否要发送这一帧报文

modules/power_meter/power_meter.c

@@ -1,105 +0,0 @@
-#include "power_meter.h"
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "bsp_dwt.h"
-
-static void PowerMeterLostCallback(void *meter_ptr)
-{
-    PowerMeterInstance *meter = (PowerMeterInstance *)meter_ptr;
-    if (meter != 0) {
-        meter->online = 0u;
-    }
-}
-
-static void PowerMeterRxCallback(CANInstance *can)
-{
-    if (can == 0 || can->id == 0 || can->rx_len < 4u) {
-        return;
-    }
-
-    PowerMeterInstance *meter = (PowerMeterInstance *)can->id;
-    const uint8_t *data = can->rx_buff;
-    const float scale = meter->scale > 0.0f ? meter->scale : POWER_METER_DEFAULT_SCALE;
-
-    meter->raw_current = (uint16_t)(((uint16_t)data[1] << 8) | data[0]);
-    meter->raw_voltage = (uint16_t)(((uint16_t)data[3] << 8) | data[2]);
-    meter->current = (float)meter->raw_current / scale;
-    meter->voltage = (float)meter->raw_voltage / scale;
-    meter->power = meter->voltage * meter->current;
-    meter->update_count++;
-    meter->last_update_time_ms = DWT_GetTimeline_ms();
-    meter->online = 1u;
-
-    if (meter->daemon != 0) {
-        DaemonReload(meter->daemon);
-    }
-}
-
-PowerMeterInstance *PowerMeterInit(PowerMeter_Init_Config_s *config)
-{
-    if (config == 0 || config->can_config.can_handle == 0) {
-        return 0;
-    }
-
-    PowerMeterInstance *meter = (PowerMeterInstance *)malloc(sizeof(PowerMeterInstance));
-    if (meter == 0) {
-        return 0;
-    }
-    memset(meter, 0, sizeof(PowerMeterInstance));
-
-    meter->scale = config->scale > 0.0f ? config->scale : POWER_METER_DEFAULT_SCALE;
-    if (config->can_config.rx_id == 0u) {
-        config->can_config.rx_id = POWER_METER_DEFAULT_CAN_ID;
-    }
-    if (config->can_config.tx_id == 0u) {
-        config->can_config.tx_id = config->can_config.rx_id;
-    }
-
-    config->can_config.id = meter;
-    config->can_config.can_module_callback = PowerMeterRxCallback;
-    meter->can_ins = CANRegister(&config->can_config);
-
-    Daemon_Init_Config_s daemon_config = {
-        .callback = PowerMeterLostCallback,
-        .owner_id = meter,
-        .reload_count = 5u,
-        .init_count = 100u,
-    };
-    meter->daemon = DaemonRegister(&daemon_config);
-
-    return meter;
-}
-
-PowerMeterInstance *PowerMeterInitCan(CAN_HandleTypeDef *can_handle, uint32_t rx_id)
-{
-    PowerMeter_Init_Config_s config = {
-        .can_config = {
-            .can_handle = can_handle,
-            .tx_id = rx_id,
-            .rx_id = rx_id,
-        },
-        .scale = POWER_METER_DEFAULT_SCALE,
-    };
-
-    return PowerMeterInit(&config);
-}
-
-const PowerMeterInstance *PowerMeterGetData(PowerMeterInstance *meter)
-{
-    if (meter == 0) {
-        return 0;
-    }
-
-    meter->online = PowerMeterIsOnline(meter);
-    return meter;
-}
-
-uint8_t PowerMeterIsOnline(PowerMeterInstance *meter)
-{
-    if (meter == 0 || meter->daemon == 0) {
-        return 0u;
-    }
-    return DaemonIsOnline(meter->daemon);
-}

modules/power_meter/power_meter.h

@@ -1,38 +0,0 @@
-#ifndef POWER_METER_H
-#define POWER_METER_H
-
-#include <stdint.h>
-
-#include "bsp_can.h"
-#include "daemon.h"
-
-#define POWER_METER_DEFAULT_CAN_ID 0x213u
-#define POWER_METER_DEFAULT_SCALE 100.0f
-
-typedef struct
-{
-    CAN_Init_Config_s can_config;
-    float scale;
-} PowerMeter_Init_Config_s;
-
-typedef struct
-{
-    CANInstance *can_ins;
-    DaemonInstance *daemon;
-    float voltage;
-    float current;
-    float power;
-    float scale;
-    uint16_t raw_voltage;
-    uint16_t raw_current;
-    uint32_t update_count;
-    float last_update_time_ms;
-    uint8_t online;
-} PowerMeterInstance;
-
-PowerMeterInstance *PowerMeterInit(PowerMeter_Init_Config_s *config);
-PowerMeterInstance *PowerMeterInitCan(CAN_HandleTypeDef *can_handle, uint32_t rx_id);
-const PowerMeterInstance *PowerMeterGetData(PowerMeterInstance *meter);
-uint8_t PowerMeterIsOnline(PowerMeterInstance *meter);
-
-#endif

modules/referee/referee_task.c

@@ -57,7 +57,7 @@ static Graph_Data_t UI_shoot_line[10]; // 射击准线
 static Graph_Data_t UI_Energy[3];      // 电容能量条
 static String_Data_t UI_State_sta[6];  // 机器人状态,静态只需画一次
 static String_Data_t UI_State_dyn[6];  // 机器人状态,动态先add才能change
-static uint32_t shoot_line_location[10] = {525, 950, 490, 515, 565};
+static uint32_t shoot_line_location[10] = {540, 960, 490, 515, 565};
 
 void MyUIInit()
 {
@@ -66,19 +66,19 @@ void MyUIInit()
     while (referee_recv_info->GameRobotState.robot_id == 0)
         osDelay(100); // 若还未收到裁判系统数据,等待一段时间后再检查
 
-    DeterminRobotID();                                            // 确定ui要发送到的目标客户端.
+    DeterminRobotID();                                            // 确定ui要发送到的目标客户端
     UIDelete(&referee_recv_info->referee_id, UI_Data_Del_ALL, 0); // 清空UI
 
     // 绘制发射基准线
-    //UILineDraw(&UI_shoot_line[0], "sl0", UI_Graph_ADD, 7, UI_Color_White, 3, 710, shoot_line_location[0], 1210, shoot_line_location[0]);
+    UILineDraw(&UI_shoot_line[0], "sl0", UI_Graph_ADD, 7, UI_Color_White, 3, 710, shoot_line_location[0], 1210, shoot_line_location[0]);
     UILineDraw(&UI_shoot_line[1], "sl1", UI_Graph_ADD, 7, UI_Color_White, 3, shoot_line_location[1], 340, shoot_line_location[1], 740);
     UILineDraw(&UI_shoot_line[2], "sl2", UI_Graph_ADD, 7, UI_Color_Yellow, 2, 810, shoot_line_location[2], 1110, shoot_line_location[2]);
-    UILineDraw(&UI_shoot_line[3], "sl3", UI_Graph_ADD, 7, UI_Color_Yellow, 2, 860, 475, 1060, 475);
+    UILineDraw(&UI_shoot_line[3], "sl3", UI_Graph_ADD, 7, UI_Color_Yellow, 2, 810, shoot_line_location[3], 1110, shoot_line_location[3]);
-    //UILineDraw(&UI_shoot_line[4], "sl4", UI_Graph_ADD, 7, UI_Color_Yellow, 2, 810, shoot_line_location[4], 1110, shoot_line_location[4]);
+    UILineDraw(&UI_shoot_line[4], "sl4", UI_Graph_ADD, 7, UI_Color_Yellow, 2, 810, shoot_line_location[4], 1110, shoot_line_location[4]);
     UIGraphRefresh(&referee_recv_info->referee_id, 5, UI_shoot_line[0], UI_shoot_line[1], UI_shoot_line[2], UI_shoot_line[3], UI_shoot_line[4]);
 
     // 绘制车辆状态标志指示
-    UICharDraw(&UI_State_sta[0], "ss0", UI_Graph_ADD, 8, UI_Color_Main, 15, 2, 150, 750, "level:");
+    UICharDraw(&UI_State_sta[0], "ss0", UI_Graph_ADD, 8, UI_Color_Main, 15, 2, 150, 750, "chassis:");
     UICharRefresh(&referee_recv_info->referee_id, UI_State_sta[0]);
     UICharDraw(&UI_State_sta[1], "ss1", UI_Graph_ADD, 8, UI_Color_Yellow, 15, 2, 150, 700, "gimbal:");
     UICharRefresh(&referee_recv_info->referee_id, UI_State_sta[1]);
@@ -91,7 +91,7 @@ void MyUIInit()
 
     // 绘制车辆状态标志，动态
     // 由于初始化时xxx_last_mode默认为0，所以此处对应UI也应该设为0时对应的UI，防止模式不变的情况下无法置位flag，导致UI无法刷新
-    UICharDraw(&UI_State_dyn[0], "sd0", UI_Graph_ADD, 8, UI_Color_Main, 15, 2, 270, 750, "1");
+    UICharDraw(&UI_State_dyn[0], "sd0", UI_Graph_ADD, 8, UI_Color_Main, 15, 2, 270, 750, "zeroforce");
     UICharRefresh(&referee_recv_info->referee_id, UI_State_dyn[0]);
     UICharDraw(&UI_State_dyn[1], "sd1", UI_Graph_ADD, 8, UI_Color_Yellow, 15, 2, 270, 700, "zeroforce");
     UICharRefresh(&referee_recv_info->referee_id, UI_State_dyn[1]);
@@ -116,7 +116,7 @@ void MyUIInit()
     UIGraphRefresh(&referee_recv_info->referee_id, 2, UI_Energy[1], UI_Energy[2]);
 }
 
-// 测试用函数，实现模式自动变化,用于检查该任务和裁判系统是否连接正常.
+// 测试用函数，实现模式自动变化,用于检查该任务和裁判系统是否连接正常
 static uint8_t count = 0;
 static uint16_t count1 = 0;
 static void RobotModeTest(Referee_Interactive_info_t *_Interactive_data) // 测试用函数，实现模式自动变化
@@ -176,15 +176,27 @@ static void RobotModeTest(Referee_Interactive_info_t *_Interactive_data) // 测
 static void MyUIRefresh(referee_info_t *referee_recv_info, Referee_Interactive_info_t *_Interactive_data)
 {
     UIChangeCheck(_Interactive_data);
-    // robot level
+    // chassis
-    if (_Interactive_data->Referee_Interactive_Flag.robot_level_flag == 1)
+    if (_Interactive_data->Referee_Interactive_Flag.chassis_flag == 1)
     {
-        char level_str[2];
+        switch (_Interactive_data->chassis_mode)
-        level_str[0] = '0' + _Interactive_data->robot_level;
+        {
-        level_str[1] = '\0';
+        case CHASSIS_ZERO_FORCE:
-        UICharDraw(&UI_State_dyn[0], "sd0", UI_Graph_Change, 8, UI_Color_Main, 15, 2, 270, 750, level_str);
+            UICharDraw(&UI_State_dyn[0], "sd0", UI_Graph_Change, 8, UI_Color_Main, 15, 2, 270, 750, "zeroforce");
+            break;
+        case CHASSIS_ROTATE:
+            UICharDraw(&UI_State_dyn[0], "sd0", UI_Graph_Change, 8, UI_Color_Main, 15, 2, 270, 750, "rotate   ");
+            // 此处注意字数对齐问题，字数相同才能覆盖掉
+            break;
+        case CHASSIS_NO_FOLLOW:
+            UICharDraw(&UI_State_dyn[0], "sd0", UI_Graph_Change, 8, UI_Color_Main, 15, 2, 270, 750, "nofollow ");
+            break;
+        case CHASSIS_FOLLOW_GIMBAL_YAW:
+            UICharDraw(&UI_State_dyn[0], "sd0", UI_Graph_Change, 8, UI_Color_Main, 15, 2, 270, 750, "follow   ");
+            break;
+        }
         UICharRefresh(&referee_recv_info->referee_id, UI_State_dyn[0]);
-        _Interactive_data->Referee_Interactive_Flag.robot_level_flag = 0;
+        _Interactive_data->Referee_Interactive_Flag.chassis_flag = 0;
     }
     // gimbal
     if (_Interactive_data->Referee_Interactive_Flag.gimbal_flag == 1)
@@ -249,12 +261,6 @@ static void MyUIRefresh(referee_info_t *referee_recv_info, Referee_Interactive_i
  */
 static void UIChangeCheck(Referee_Interactive_info_t *_Interactive_data)
 {
-    if (_Interactive_data->robot_level != _Interactive_data->robot_last_level)
-    {
-        _Interactive_data->Referee_Interactive_Flag.robot_level_flag = 1;
-        _Interactive_data->robot_last_level = _Interactive_data->robot_level;
-    }
-
     if (_Interactive_data->chassis_mode != _Interactive_data->chassis_last_mode)
     {
         _Interactive_data->Referee_Interactive_Flag.chassis_flag = 1;
@@ -290,4 +296,4 @@ static void UIChangeCheck(Referee_Interactive_info_t *_Interactive_data)
         _Interactive_data->Referee_Interactive_Flag.Power_flag = 1;
         _Interactive_data->Chassis_last_Power_Data.chassis_power_mx = _Interactive_data->Chassis_Power_Data.chassis_power_mx;
     }
-}
+}

modules/referee/rm_referee.h

@@ -54,7 +54,6 @@ typedef struct
 	uint32_t lid_flag : 1;
 	uint32_t friction_flag : 1;
 	uint32_t Power_flag : 1;
-	uint32_t robot_level_flag : 1;
 } Referee_Interactive_Flag_t;
 
 // 此结构体包含UI绘制与机器人车间通信的需要的其他非裁判系统数据
@@ -62,7 +61,6 @@ typedef struct
 {
 	Referee_Interactive_Flag_t Referee_Interactive_Flag;
 	// 为UI绘制以及交互数据所用
-	uint8_t robot_level;					 // 机器人等级
 	chassis_mode_e chassis_mode;			 // 底盘模式
 	gimbal_mode_e gimbal_mode;				 // 云台模式
 	shoot_mode_e shoot_mode;				 // 发射模式设置
@@ -71,7 +69,6 @@ typedef struct
 	Chassis_Power_Data_s Chassis_Power_Data; // 功率控制
 
 	// 上一次的模式，用于flag判断
-	uint8_t robot_last_level;
 	chassis_mode_e chassis_last_mode;
 	gimbal_mode_e gimbal_last_mode;
 	shoot_mode_e shoot_last_mode;
@@ -100,4 +97,4 @@ referee_info_t *RefereeInit(UART_HandleTypeDef *referee_usart_handle);
  */
 void RefereeSend(uint8_t *send, uint16_t tx_len);
 
-#endif // !REFEREE_H
+#endif // !REFEREE_H

modules/remote/remote_control.c

@@ -20,13 +20,32 @@ static DaemonInstance *rc_daemon_instance;
  * @brief 矫正遥控器摇杆的值,超过660或者小于-660的值都认为是无效值,置0
  *
  */
-static void RectifyRCjoystick()
+// static void RectifyRCjoystick()
+// {
+//     for (uint8_t i = 0; i < 5; ++i)
+//         if (abs(*(&rc_ctrl[TEMP].rc.rocker_l_ + i)) > 660)
+//             *(&rc_ctrl[TEMP].rc.rocker_l_ + i) = 0;
+// }
+static void RectifyRCjoystick()//左遥杆水平向右限幅不够，因为下面的+3，将+3删除就用上面的
 {
+    int16_t *rocker_ptr = &rc_ctrl[TEMP].rc.rocker_l_;
     for (uint8_t i = 0; i < 5; ++i)
-        if (abs(*(&rc_ctrl[TEMP].rc.rocker_l_ + i)) > 660)
+    {
-            *(&rc_ctrl[TEMP].rc.rocker_l_ + i) = 0;
+        if (i == 0) // 左遥杆水平方向
+        {
+            // 增加右向最大值到700，左向保持660不变
+            if (rocker_ptr[i] > 700)
+                rocker_ptr[i] = 700;
+            else if (rocker_ptr[i] < -660)
+                rocker_ptr[i] = -660;
+        }
+        else // 其他通道保持原限制
+        {
+            if (abs(rocker_ptr[i]) > 660)
+                rocker_ptr[i] = 0;
+        }
+    }
 }
-
 /**
  * @brief 遥控器数据解析
  *
@@ -40,7 +59,7 @@ static void sbus_to_rc(const uint8_t *sbus_buf)
     rc_ctrl[TEMP].rc.rocker_l_ = (((sbus_buf[2] >> 6) | (sbus_buf[3] << 2) | (sbus_buf[4] << 10)) & 0x07ff) - RC_CH_VALUE_OFFSET; //!< Channel 2
     rc_ctrl[TEMP].rc.rocker_l1 = (((sbus_buf[4] >> 1) | (sbus_buf[5] << 7)) & 0x07ff) - RC_CH_VALUE_OFFSET;                       //!< Channel 3
     rc_ctrl[TEMP].rc.dial = ((sbus_buf[16] | (sbus_buf[17] << 8)) & 0x07FF) - RC_CH_VALUE_OFFSET;
-    rc_ctrl[TEMP].rc.rocker_l_= rc_ctrl[TEMP].rc.rocker_l_+5.5;
+    rc_ctrl[TEMP].rc.rocker_l_= rc_ctrl[TEMP].rc.rocker_l_+3;
     // 左侧拨轮
     RectifyRCjoystick();
     // 开关,0左1右