tronone-h7-scaffold/User_Code/module/periph/imu/damiao_imu/damiao_imu.h

#ifndef __DM_IMU_H
#define __DM_IMU_H

#include "stm32h7xx_hal.h"


#define ACCEL_CAN_MAX (235.2f)
#define ACCEL_CAN_MIN	(-235.2f)
#define GYRO_CAN_MAX	(34.88f)
#define GYRO_CAN_MIN	(-34.88f)
#define PITCH_CAN_MAX	(90.0f)
#define PITCH_CAN_MIN	(-90.0f)
#define ROLL_CAN_MAX	(180.0f)
#define ROLL_CAN_MIN	(-180.0f)
#define YAW_CAN_MAX		(180.0f)
#define YAW_CAN_MIN 	(-180.0f)
#define TEMP_MIN			(0.0f)
#define TEMP_MAX			(60.0f)
#define Quaternion_MIN	(-1.0f)
#define Quaternion_MAX	(1.0f)

#define CMD_READ 0
#define CMD_WRITE 1

typedef enum
{
    COM_USB = 0,
    COM_RS485,
    COM_CAN,
    COM_VOFA

} imu_com_port_e;

typedef enum
{
    CAN_BAUD_1M = 0,
    CAN_BAUD_500K,
    CAN_BAUD_400K,
    CAN_BAUD_250K,
    CAN_BAUD_200K,
    CAN_BAUD_100K,
    CAN_BAUD_50K,
    CAN_BAUD_25K

} imu_baudrate_e;

typedef enum
{
    REBOOT_IMU = 0,
    ACCEL_DATA,
    GYRO_DATA,
    EULER_DATA,
    QUAT_DATA,
    SET_ZERO,
    ACCEL_CALI,
    GYRO_CALI,
    MAG_CALI,
    CHANGE_COM,
    SET_DELAY,
    CHANGE_ACTIVE,
    SET_BAUD,
    SET_CAN_ID,
    SET_MST_ID,
    DATA_OUTPUT_SELECTION,
    SAVE_PARAM = 254,
    RESTORE_SETTING = 255
} reg_id_e;


typedef struct
{
    uint8_t can_id;
    uint8_t mst_id;

    FDCAN_HandleTypeDef *can_handle;

    float pitch;
    float roll;
    float yaw;

    float gyro[3];
    float accel[3];

    float q[4];

    float cur_temp;

} imu_t;

void imu_init(uint8_t can_id, uint8_t mst_id, FDCAN_HandleTypeDef *hfdcan);

void imu_write_reg(uint8_t reg_id, uint32_t data);

void imu_read_reg(uint8_t reg_id);

void imu_reboot();

void imu_accel_calibration();

void imu_gyro_calibration();

void imu_change_com_port(imu_com_port_e port);

void imu_set_active_mode_delay(uint32_t delay);

void imu_change_to_active();

void imu_change_to_request();

void imu_set_baud(imu_baudrate_e baud);

void imu_set_can_id(uint8_t can_id);

void imu_set_mst_id(uint8_t mst_id);

void imu_save_parameters();

void imu_restore_settings();

void imu_request_accel();

void imu_request_gyro();

void imu_request_euler();

void imu_request_quat();

#endif