From 9aac6aca4d8103f95c3df100ab34f7d79c8c51dc Mon Sep 17 00:00:00 2001
From: miss <14435740+miss_666@user.noreply.gitee.com>
Date: Tue, 11 Nov 2025 20:58:22 +0800
Subject: [PATCH] changed default toolchain to arm-none-eabi

---
 ozonedeb/missdeb1.jdebug      | 337 ++++++++++++++++++++++++++++++++++
 ozonedeb/missdeb1.jdebug.user |  33 ++++
 2 files changed, 370 insertions(+)
 create mode 100644 ozonedeb/missdeb1.jdebug
 create mode 100644 ozonedeb/missdeb1.jdebug.user

diff --git a/ozonedeb/missdeb1.jdebug b/ozonedeb/missdeb1.jdebug
new file mode 100644
index 0000000..8e1da53
--- /dev/null
+++ b/ozonedeb/missdeb1.jdebug
@@ -0,0 +1,337 @@
+/*********************************************************************
+*                 (c) SEGGER Microcontroller GmbH                    *
+*                      The Embedded Experts                          *
+*                         www.segger.com                             *
+**********************************************************************
+
+File          : C:/Users/Miss/CLionProjects/tronone-h7-scaffold/ozonedeb/missdeb1.jdebug
+Created       : 11 Nov 2025 20:56
+Ozone Version : V3.24
+*/
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  //
+  // Dialog-generated settings
+  //
+  Project.AddPathSubstitute ("C:/Users/Miss/CLionProjects/tronone-h7-scaffold/ozonedeb", "$(ProjectDir)");
+  Project.AddPathSubstitute ("c:/users/miss/clionprojects/tronone-h7-scaffold/ozonedeb", "$(ProjectDir)");
+  Project.SetDevice ("STM32H723VG");
+  Project.SetHostIF ("USB", "602717886");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("4 MHz");
+  Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M7F.svd");
+  Project.AddSvdFile ("D:/STM32CubeCLT/STM32CubeCLT_1.19.0/STMicroelectronics_CMSIS_SVD/STM32H723.svd");
+  //
+  // User settings
+  //
+  File.Open ("C:/Users/Miss/CLionProjects/tronone-h7-scaffold/cmake-build-debug/TronOneH7_Scaffold.elf");
+}
+
+/*********************************************************************
+*
+*       OnStartupComplete
+*
+* Function description
+*   Called when program execution has reached/passed
+*   the startup completion point. Optional.
+*
+**********************************************************************
+*/
+//void OnStartupComplete (void) {
+//}
+
+/*********************************************************************
+*
+*      TargetReset
+*
+* Function description
+*   Replaces the default target device reset routine. Optional.
+*
+* Notes
+*   This example demonstrates the usage when
+*   debugging an application in RAM on a Cortex-M target device.
+*
+**********************************************************************
+*/
+//void TargetReset (void) {
+//
+//  unsigned int SP;
+//  unsigned int PC;
+//  unsigned int VectorTableAddr;
+//
+//  VectorTableAddr = Elf.GetBaseAddr();
+//  //
+//  // Set up initial stack pointer
+//  //
+//  if (VectorTableAddr != 0xFFFFFFFF) {
+//    SP = Target.ReadU32(VectorTableAddr);
+//    Target.SetReg("SP", SP);
+//  }
+//  //
+//  // Set up entry point PC
+//  //
+//  PC = Elf.GetEntryPointPC();
+//
+//  if (PC != 0xFFFFFFFF) {
+//    Target.SetReg("PC", PC);
+//  } else if (VectorTableAddr != 0xFFFFFFFF) {
+//    PC = Target.ReadU32(VectorTableAddr + 4);
+//    Target.SetReg("PC", PC);
+//  } else {
+//    Util.Error("Project file error: failed to set entry point PC", 1);
+//  }
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetReset (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*   The default implementation initializes SP and PC to reset values.
+**
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  _SetupTarget();
+}
+
+/*********************************************************************
+*
+*       DebugStart
+*
+* Function description
+*   Replaces the default debug session startup routine. Optional.
+*
+**********************************************************************
+*/
+//void DebugStart (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetConnect
+*
+* Function description
+*   Replaces the default target IF connection routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetDownload
+*
+* Function description
+*   Replaces the default program download routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*   The default implementation initializes SP and PC to reset values.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  _SetupTarget();
+}
+
+/*********************************************************************
+*
+*       BeforeTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetHalt
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetHalt (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetResume
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetResume (void) {
+//}
+
+/*********************************************************************
+*
+*       OnSnapshotLoad
+*
+* Function description
+*   Called upon loading a snapshot. Optional.
+*
+* Additional information
+*   This function is used to restore the target state in cases
+*   where values cannot simply be written to the target.
+*   Typical use: GPIO clock needs to be enabled, before
+*   GPIO is configured.
+*
+**********************************************************************
+*/
+//void OnSnapshotLoad (void) {
+//}
+
+/*********************************************************************
+*
+*       OnSnapshotSave
+*
+* Function description
+*   Called upon saving a snapshot. Optional.
+*
+* Additional information
+*   This function is usually used to save values of the target
+*   state which can either not be trivially read,
+*   or need to be restored in a specific way or order.
+*   Typically use: Memory Mapped Registers,
+*   such as PLL and GPIO configuration.
+*
+**********************************************************************
+*/
+//void OnSnapshotSave (void) {
+//}
+
+/*********************************************************************
+*
+*       OnError
+*
+* Function description
+*   Called when an error ocurred. Optional.
+*
+**********************************************************************
+*/
+//void OnError (void) {
+//}
+
+/*********************************************************************
+*
+*       _SetupTarget
+*
+* Function description
+*   Setup the target.
+*   Called by AfterTargetReset() and AfterTargetDownload().
+*
+*   Auto-generated function. May be overridden by Ozone.
+*
+**********************************************************************
+*/
+void _SetupTarget(void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+  //
+  // Set up initial stack pointer
+  //
+  SP = Target.ReadU32(VectorTableAddr);
+  if (SP != 0xFFFFFFFF) {
+    Target.SetReg("SP", SP);
+  }
+  //
+  // Set up entry point PC
+  //
+  PC = Elf.GetEntryPointPC();
+  if (PC != 0xFFFFFFFF) {
+    Target.SetReg("PC", PC);
+  } else {
+    Util.Error("Project script error: failed to set up entry point PC", 1);
+  }
+}
\ No newline at end of file
diff --git a/ozonedeb/missdeb1.jdebug.user b/ozonedeb/missdeb1.jdebug.user
new file mode 100644
index 0000000..3e3023b
--- /dev/null
+++ b/ozonedeb/missdeb1.jdebug.user
@@ -0,0 +1,33 @@
+
+Breakpoint=C:/Users/Miss/CLionProjects/tronone-h7-scaffold/User_Code/application/indicator_app/ws2812status.c:49, State=BP_STATE_ON
+OpenDocument="ws2812status.c", FilePath="C:/Users/Miss/CLionProjects/tronone-h7-scaffold/User_Code/application/indicator_app/ws2812status.c", Line=0
+OpenDocument="tasks.c", FilePath="C:/Users/Miss/CLionProjects/tronone-h7-scaffold/Middlewares/Third_Party/FreeRTOS/Source/tasks.c", Line=2294
+OpenDocument="delayticks.c", FilePath="C:/Users/Miss/CLionProjects/tronone-h7-scaffold/User_Code/bsp/delayticks/delayticks.c", Line=0
+OpenDocument="main.c", FilePath="C:/Users/Miss/CLionProjects/tronone-h7-scaffold/Core/Src/main.c", Line=202
+OpenToolbar="Debug", Floating=0, x=0, y=0
+OpenToolbar="Breakpoints", Floating=0, x=1, y=0
+OpenWindow="Registers 1", DockArea=BOTTOM, x=1, y=0, w=373, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, FilteredItems=[], RefreshRate=1
+OpenWindow="Source Files", DockArea=LEFT, x=0, y=1, w=662, h=266, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Disassembly", DockArea=BOTTOM, x=2, y=0, w=650, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Break & Tracepoints", DockArea=LEFT, x=0, y=0, w=662, h=212, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, VectorCatchIndexMask=254
+OpenWindow="Memory 1", DockArea=BOTTOM, x=3, y=0, w=486, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, EditorAddress=0x20006100
+OpenWindow="Global Data", DockArea=RIGHT, x=0, y=1, w=686, h=641, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Watched Data 1", DockArea=LEFT, x=0, y=2, w=662, h=402, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Functions", DockArea=LEFT, x=0, y=3, w=662, h=415, TabPos=1, TopOfStack=0, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Call Graph", DockArea=LEFT, x=0, y=3, w=662, h=415, TabPos=2, TopOfStack=1, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Data Sampling", DockArea=BOTTOM, x=0, y=0, w=1368, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, VisibleTab=0, UniformSampleSpacing=0
+OpenWindow="Timeline", DockArea=RIGHT, x=0, y=0, w=686, h=680, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=1, DataPaneShown=1, PowerPaneShown=1, CodePaneShown=1, PinCursor="Cursor Movable", TimePerDiv="1 ns / Div", TimeStampFormat="Time", DataGraphDrawAsPoints=0, DataGraphLegendShown=1, DataGraphUniformSampleSpacing=0, DataGraphLegendPosition="458;0", PowerGraphDrawAsPoints=0, PowerGraphLegendShown=1, PowerGraphAvgFilterTime=Off, PowerGraphAvgFilterLen=Off, PowerGraphUniformSampleSpacing=0, PowerGraphLegendPosition="418;-81", CodeGraphLegendShown=1, CodeGraphLegendPosition="438;0"
+OpenWindow="Console", DockArea=LEFT, x=0, y=3, w=662, h=415, TabPos=0, TopOfStack=0, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+TableHeader="Global Data", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Location";"Size";"Type";"Scope"], ColWidths=[222;130;100;54;95;514]
+TableHeader="Vector Catches", SortCol="None", SortOrder="ASCENDING", VisibleCols=["";"Vector Catch";"Description"], ColWidths=[50;300;500]
+TableHeader="Break & Tracepoints", SortCol="None", SortOrder="ASCENDING", VisibleCols=["";"Type";"Location";"Extras"], ColWidths=[100;100;118;344]
+TableHeader="Functions", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Address";"Size";"#Insts";"Source"], ColWidths=[1164;100;100;100;100]
+TableHeader="Data Sampling Table", SortCol="None", SortOrder="ASCENDING", VisibleCols=["Index";"Time"], ColWidths=[100;100]
+TableHeader="Data Sampling Setup", SortCol="Expression", SortOrder="ASCENDING", VisibleCols=["Expression";"Type";"Value";"Min";"Max";"Average";"# Changes";"Min. Change";"Max. Change"], ColWidths=[159;100;100;100;100;108;128;148;425]
+TableHeader="Power Sampling", SortCol="None", SortOrder="ASCENDING", VisibleCols=["Index";"Time";"Ch 0"], ColWidths=[100;100;100]
+TableHeader="Registers 1", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Description"], ColWidths=[100;105;364]
+TableHeader="Watched Data 1", SortCol="Expression", SortOrder="ASCENDING", VisibleCols=["Expression";"Value";"Location";"Refresh"], ColWidths=[171;101;100;290]
+TableHeader="RegisterSelectionDialog", SortCol="None", SortOrder="ASCENDING", VisibleCols=[], ColWidths=[]
+TableHeader="TargetExceptionDialog", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Address";"Description"], ColWidths=[26;26;26;46]
+TableHeader="Call Graph", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Stack Total";"Stack Local";"Code Total";"Code Local";"Depth";"Called From"], ColWidths=[384;100;100;100;100;100;148]
+TableHeader="Source Files", SortCol="File", SortOrder="ASCENDING", VisibleCols=["File";"Status";"Size";"#Insts";"Path"], ColWidths=[319;100;100;100;1224]
\ No newline at end of file