tronone-h7-scaffold/User_Code/module/periph/imu/damiao_imu/damiao_imu.c

#include "damiao_imu.h"
#include "fdcan.h"
#include <string.h>

imu_t imu;

/**
************************************************************************
* @brief:      	float_to_uint: 浮点数转换为无符号整数函数
* @param[in]:   x_float:	待转换的浮点数
* @param[in]:   x_min:		范围最小值
* @param[in]:   x_max:		范围最大值
* @param[in]:   bits: 		目标无符号整数的位数
* @retval:     	无符号整数结果
* @details:    	将给定的浮点数 x 在指定范围 [x_min, x_max] 内进行线性映射，映射结果为一个指定位数的无符号整数
************************************************************************
**/
int float_to_uint(float x_float, float x_min, float x_max, int bits)
{
    /* Converts a float to an unsigned int, given range and number of bits */
    float span = x_max - x_min;
    float offset = x_min;
    return (int) ((x_float - offset) * ((float) ((1 << bits) - 1)) / span);
}

/**
************************************************************************
* @brief:      	uint_to_float: 无符号整数转换为浮点数函数
* @param[in]:   x_int: 待转换的无符号整数
* @param[in]:   x_min: 范围最小值
* @param[in]:   x_max: 范围最大值
* @param[in]:   bits:  无符号整数的位数
* @retval:     	浮点数结果
* @details:    	将给定的无符号整数 x_int 在指定范围 [x_min, x_max] 内进行线性映射，映射结果为一个浮点数
************************************************************************
**/
float uint_to_float(int x_int, float x_min, float x_max, int bits)
{
    /* converts unsigned int to float, given range and number of bits */
    float span = x_max - x_min;
    float offset = x_min;
    return ((float) x_int) * span / ((float) ((1 << bits) - 1)) + offset;
}

void imu_init(uint8_t can_id, uint8_t mst_id, FDCAN_HandleTypeDef *hfdcan)
{
    imu.can_id = can_id;
    imu.mst_id = mst_id;
    imu.can_handle = hfdcan;
}


/*
		发送指令
*/
static void imu_send_cmd(uint8_t reg_id, uint8_t ac, uint32_t data)
{

    if (imu.can_handle == NULL)
        return;

    FDCAN_TxHeaderTypeDef tx_header;

    uint8_t buf[8] = {0xCC, reg_id, ac, 0xDD, 0, 0, 0, 0};
    memcpy(buf + 4, &data, 4);

    tx_header.DataLength = FDCAN_DLC_BYTES_8;
    tx_header.IdType = FDCAN_STANDARD_ID;
    tx_header.TxFrameType = FDCAN_DATA_FRAME;
    tx_header.Identifier = imu.can_id;
    tx_header.FDFormat = FDCAN_CLASSIC_CAN;
    tx_header.ErrorStateIndicator = FDCAN_ESI_ACTIVE;
    tx_header.BitRateSwitch = FDCAN_BRS_OFF;
    tx_header.TxEventFifoControl = FDCAN_NO_TX_EVENTS;
    tx_header.MessageMarker = 0x00;

    if (HAL_FDCAN_GetTxFifoFreeLevel(imu.can_handle) > 2)
    {
        HAL_FDCAN_AddMessageToTxFifoQ(imu.can_handle, &tx_header, buf);
    }
}


void imu_write_reg(uint8_t reg_id, uint32_t data)
{
    imu_send_cmd(reg_id, CMD_WRITE, data);
}

void imu_read_reg(uint8_t reg_id)
{
    imu_send_cmd(reg_id, CMD_READ, 0);
}

void imu_reboot()
{
    imu_write_reg(REBOOT_IMU, 0);
}

void imu_accel_calibration()
{
    imu_write_reg(ACCEL_CALI, 0);
}

void imu_gyro_calibration()
{
    imu_write_reg(GYRO_CALI, 0);
}


void imu_change_com_port(imu_com_port_e port)
{
    imu_write_reg(CHANGE_COM, (uint8_t) port);
}

void imu_set_active_mode_delay(uint32_t delay)
{
    imu_write_reg(SET_DELAY, delay);
}

//设置成主动模式
void imu_change_to_active()
{
    imu_write_reg(CHANGE_ACTIVE, 1);
}

void imu_change_to_request()
{
    imu_write_reg(CHANGE_ACTIVE, 0);
}

void imu_set_baud(imu_baudrate_e baud)
{
    imu_write_reg(SET_BAUD, (uint8_t) baud);
}

void imu_set_can_id(uint8_t can_id)
{
    imu_write_reg(SET_CAN_ID, can_id);
}

void imu_set_mst_id(uint8_t mst_id)
{
    imu_write_reg(SET_MST_ID, mst_id);
}

void imu_save_parameters()
{
    imu_write_reg(SAVE_PARAM, 0);
}

void imu_restore_settings()
{
    imu_write_reg(RESTORE_SETTING, 0);
}


void imu_request_accel()
{
    imu_read_reg(ACCEL_DATA);
}

void imu_request_gyro()
{
    imu_read_reg(GYRO_DATA);
}

void imu_request_euler()
{
    imu_read_reg(EULER_DATA);
}

void imu_request_quat()
{
    imu_read_reg(QUAT_DATA);
}


void IMU_UpdateAccel(uint8_t *pData)
{
    uint16_t accel[3];

    accel[0] = pData[3] << 8 | pData[2];
    accel[1] = pData[5] << 8 | pData[4];
    accel[2] = pData[7] << 8 | pData[6];

    imu.accel[0] = uint_to_float(accel[0], ACCEL_CAN_MIN, ACCEL_CAN_MAX, 16);
    imu.accel[1] = uint_to_float(accel[1], ACCEL_CAN_MIN, ACCEL_CAN_MAX, 16);
    imu.accel[2] = uint_to_float(accel[2], ACCEL_CAN_MIN, ACCEL_CAN_MAX, 16);

}

void IMU_UpdateGyro(uint8_t *pData)
{
    uint16_t gyro[3];

    gyro[0] = pData[3] << 8 | pData[2];
    gyro[1] = pData[5] << 8 | pData[4];
    gyro[2] = pData[7] << 8 | pData[6];

    imu.gyro[0] = uint_to_float(gyro[0], GYRO_CAN_MIN, GYRO_CAN_MAX, 16);
    imu.gyro[1] = uint_to_float(gyro[1], GYRO_CAN_MIN, GYRO_CAN_MAX, 16);
    imu.gyro[2] = uint_to_float(gyro[2], GYRO_CAN_MIN, GYRO_CAN_MAX, 16);
}


void IMU_UpdateEuler(uint8_t *pData)
{
    int euler[3];

    euler[0] = pData[3] << 8 | pData[2];
    euler[1] = pData[5] << 8 | pData[4];
    euler[2] = pData[7] << 8 | pData[6];

    imu.pitch = uint_to_float(euler[0], PITCH_CAN_MIN, PITCH_CAN_MAX, 16);
    imu.yaw = uint_to_float(euler[1], YAW_CAN_MIN, YAW_CAN_MAX, 16);
    imu.roll = uint_to_float(euler[2], ROLL_CAN_MIN, ROLL_CAN_MAX, 16);
}


void IMU_UpdateQuaternion(uint8_t *pData)
{
    int w = pData[1] << 6 | ((pData[2] & 0xF8) >> 2);
    int x = (pData[2] & 0x03) << 12 | (pData[3] << 4) | ((pData[4] & 0xF0) >> 4);
    int y = (pData[4] & 0x0F) << 10 | (pData[5] << 2) | (pData[6] & 0xC0) >> 6;
    int z = (pData[6] & 0x3F) << 8 | pData[7];

    imu.q[0] = uint_to_float(w, Quaternion_MIN, Quaternion_MAX, 14);
    imu.q[1] = uint_to_float(x, Quaternion_MIN, Quaternion_MAX, 14);
    imu.q[2] = uint_to_float(y, Quaternion_MIN, Quaternion_MAX, 14);
    imu.q[3] = uint_to_float(z, Quaternion_MIN, Quaternion_MAX, 14);
}

void IMU_UpdateData(uint8_t *pData)
{

    switch (pData[0])
    {
        case 1:
            IMU_UpdateAccel(pData);
            break;
        case 2:
            IMU_UpdateGyro(pData);
            break;
        case 3:
            IMU_UpdateEuler(pData);
            break;
        case 4:
            IMU_UpdateQuaternion(pData);
            break;
    }
}