add DMA remote control

2026-07-23 19:25:09 +08:00 · 2026-07-14 21:56:46 +08:00
parent 591707d9fc
commit f4c0424c45
16 changed files with 371 additions and 191 deletions
--- a/Core/Src/freertos.c
+++ b/Core/Src/freertos.c
@@ -35,6 +35,7 @@
 // #include "bsp_log.h"
 #include "dev_cmd.h"
 #include "daemon.h"
+#include "bsp_usart.h"
 /* USER CODE END Includes */

 /* Private typedef -----------------------------------------------------------*/
@@ -449,6 +450,8 @@ __attribute__((noreturn)) void StartDaemonTask(void *argument)
    /* Infinite loop */
    for (;;)
    {
+        USARTServiceTask();
+
        // 1. 执行核心的数据刷新逻辑
        Daemon_Update();

--- a/Core/Src/usart.c
+++ b/Core/Src/usart.c
@@ -361,7 +361,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
    hdma_uart5_rx.Init.MemInc = DMA_MINC_ENABLE;
    hdma_uart5_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
    hdma_uart5_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
-    hdma_uart5_rx.Init.Mode = DMA_CIRCULAR;
+    hdma_uart5_rx.Init.Mode = DMA_NORMAL;
    hdma_uart5_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
    hdma_uart5_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    if (HAL_DMA_Init(&hdma_uart5_rx) != HAL_OK)
--- a/STM32H723XG_FLASH.ld
+++ b/STM32H723XG_FLASH.ld
@@ -227,6 +227,17 @@ SECTIONS
  PROVIDE( __bss_start = _sbss );
  PROVIDE( __bss_size = __bss_end - __bss_start );

+  /* DMA1/DMA2 cannot access DTCM. The MPU config makes RAM_D1 non-cacheable. */
+  .dma_buffer (NOLOAD) :
+  {
+    . = ALIGN(32);
+    __dma_buffer_start__ = .;
+    KEEP(*(.dma_buffer))
+    KEEP(*(.dma_buffer.*))
+    . = ALIGN(32);
+    __dma_buffer_end__ = .;
+  } >RAM_D1
+
  /* 用户堆栈段，用于检查剩余RAM是否足够 */
  ._user_heap_stack (NOLOAD) :
  {
--- a/TronOneH7_Scaffold.ioc
+++ b/TronOneH7_Scaffold.ioc
@@ -156,7 +156,7 @@ Dma.UART5_RX.13.FIFOMode=DMA_FIFOMODE_DISABLE
 Dma.UART5_RX.13.Instance=DMA1_Stream5
 Dma.UART5_RX.13.MemDataAlignment=DMA_MDATAALIGN_BYTE
 Dma.UART5_RX.13.MemInc=DMA_MINC_ENABLE
-Dma.UART5_RX.13.Mode=DMA_CIRCULAR
+Dma.UART5_RX.13.Mode=DMA_NORMAL
 Dma.UART5_RX.13.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
 Dma.UART5_RX.13.PeriphInc=DMA_PINC_DISABLE
 Dma.UART5_RX.13.Polarity=HAL_DMAMUX_REQ_GEN_RISING
--- a/User_Code/application/indicator_app/ws2812status.c
+++ b/User_Code/application/indicator_app/ws2812status.c
@@ -24,6 +24,7 @@
 #include "delayticks.h"

 #include "robot_def.h"
+#include "rc.h"

 /*---------------------VARIABLES---------------------*/
 uint8_t r = 0;
@@ -53,10 +54,13 @@ void robotSelfCheck(void)
 void ws2812Task(void *argument)
 {
    (void) argument;
-    RobotMode_t RobotMode = REMOTE_NOT_CONNECTED; // 初始状态为遥控器未连接
    while (1)
    {
-        switch (RobotMode)
+        RobotMode_t display_mode = RobotMode;
+        if (display_mode != SYS_ERROR_OCCURRED && !RemoteControlIsOnline())
+            display_mode = REMOTE_NOT_CONNECTED;
+
+        switch (display_mode)
        {
            case NORMAL_MODE:
                BlinkGreen();
--- a/User_Code/application/robot.c
+++ b/User_Code/application/robot.c
@@ -16,6 +16,8 @@

 #include "bsp_init.h"
 #include "robot.h"
+#include "rc.h"
+#include "robot_def.h"

 #include "cmsis_gcc.h"
 // #include "robot_def.h"
@@ -27,6 +29,8 @@
 // #pragma message "check if you have configured the parameters in robot_def.h, IF NOT, please refer to the comments AND DO IT, otherwise the robot will have FATAL ERRORS!!!"
 // #endif // !ROBOT_DEF_PARAM_WARNING

+volatile RobotMode_t RobotMode = REMOTE_NOT_CONNECTED;
+
 // #if defined(ONE_BOARD) || defined(CHASSIS_BOARD)
 // #include "chassis.h"
 // #endif
@@ -59,6 +63,9 @@ void RobotInit()

    BSPInit();

+    if (RemoteControlInit(&huart5) == NULL)
+        RobotMode = SYS_ERROR_OCCURRED;
+
 #if defined(ONE_BOARD) || defined(GIMBAL_BOARD)
    RobotCMDInit();
    // GimbalInit();
--- a/User_Code/bsp/usart/bsp_usart.c
+++ b/User_Code/bsp/usart/bsp_usart.c
@@ -11,43 +11,116 @@

 #include "bsp_usart.h"
 #include "bsp_log.h"
-#include "stdlib.h"
 #include "memory.h"

 /* usart service instance, modules' info would be recoreded here using USARTRegister() */
 /* usart服务实例,所有注册了usart的模块信息会被保存在这里 */
 static uint8_t idx;
 static USART_Instance *usart_instance[DEVICE_USART_CNT] = {NULL};
+static USART_Instance usart_instance_pool[DEVICE_USART_CNT]
+    __attribute__((section(".dma_buffer"), aligned(32)));
+
+static USART_Instance *USARTFindInstance(UART_HandleTypeDef *huart)
+{
+    for (uint8_t i = 0; i < idx; ++i)
+    {
+        if (usart_instance[i]->usart_handle == huart)
+            return usart_instance[i];
+    }
+    return NULL;
+}

 /**
- * @brief 启动串口服务,会在每个实例注册之后自动启用接收,当前实现为DMA接收,后续可能添加IT和BLOCKING接收
+ * @brief 启动串口DMA接收服务,模块完成实例和回调初始化后显式调用
 *
- * @todo 串口服务会在每个实例注册之后自动启用接收,当前实现为DMA接收,后续可能添加IT和BLOCKING接收
- *       可能还要将此函数修改为extern,使得module可以控制串口的启停
+ * @note 配合DMA_NORMAL和ReceiveToIdle使用,每次接收事件后由BSP重新启动
 *
 * @param _instance instance owned by module,模块拥有的串口实例
 */
-void USARTServiceInit(USART_Instance *_instance)
+HAL_StatusTypeDef USARTServiceInit(USART_Instance *_instance)
 {
-    HAL_UARTEx_ReceiveToIdle_DMA(_instance->usart_handle, _instance->recv_buff, _instance->recv_buff_size);
+    if (_instance == NULL || _instance->usart_handle == NULL || _instance->usart_handle->hdmarx == NULL)
+        return HAL_ERROR;
+
+    HAL_StatusTypeDef status = HAL_UARTEx_ReceiveToIdle_DMA(
+        _instance->usart_handle, _instance->recv_buff, _instance->recv_buff_size);
+
    // 关闭dma half transfer中断防止两次进入HAL_UARTEx_RxEventCallback()
    // 这是HAL库的一个设计失误,发生DMA传输完成/半完成以及串口IDLE中断都会触发HAL_UARTEx_RxEventCallback()
    // 我们只希望处理第一种和第三种情况,因此直接关闭DMA半传输中断
-    __HAL_DMA_DISABLE_IT(_instance->usart_handle->hdmarx, DMA_IT_HT);
+    if (status == HAL_OK)
+    {
+        __HAL_DMA_DISABLE_IT(_instance->usart_handle->hdmarx, DMA_IT_HT);
+        _instance->rx_restart_pending = 0;
+    }
+    else
+    {
+        _instance->rx_restart_pending = 1;
+    }
+
+    return status;
+}
+
+static HAL_StatusTypeDef USARTRecoverRx(USART_Instance *instance)
+{
+    UART_HandleTypeDef *huart = instance->usart_handle;
+    DMA_HandleTypeDef *hdma = huart->hdmarx;
+    HAL_StatusTypeDef abort_status = HAL_UART_AbortReceive(huart);
+
+    if (abort_status != HAL_OK || HAL_DMA_GetState(hdma) != HAL_DMA_STATE_READY)
+    {
+        if (HAL_DMA_DeInit(hdma) != HAL_OK || HAL_DMA_Init(hdma) != HAL_OK)
+            return HAL_ERROR;
+
+        /* An abort timeout returns before HAL restores the UART Rx state. */
+        if (HAL_UART_AbortReceive(huart) != HAL_OK)
+            return HAL_ERROR;
+    }
+
+    return USARTServiceInit(instance);
+}
+
+void USARTServiceTask(void)
+{
+    for (uint8_t i = 0; i < idx; ++i)
+    {
+        USART_Instance *instance = usart_instance[i];
+        if (!instance->rx_restart_pending)
+            continue;
+
+        if (USARTRecoverRx(instance) != HAL_OK)
+            instance->rx_restart_error_count++;
+    }
 }

 USART_Instance *USARTRegister(USART_Init_Config_s *init_config)
 {
+    if (init_config == NULL || init_config->usart_handle == NULL || init_config->usart_handle->hdmarx == NULL ||
+        init_config->recv_buff_size == 0 || init_config->recv_buff_size > USART_RXBUFF_LIMIT)
+    {
+        LOGERROR("[bsp_usart] invalid USART register config");
+        return NULL;
+    }
+    if (init_config->usart_handle->hdmarx->Init.Mode != DMA_NORMAL)
+    {
+        LOGERROR("[bsp_usart] ReceiveToIdle service requires DMA_NORMAL");
+        return NULL;
+    }
+
    if (idx >= DEVICE_USART_CNT) // 超过最大实例数
-        while (1)
-            LOGERROR("[bsp_usart] USART exceed max instance count!");
+    {
+        LOGERROR("[bsp_usart] USART exceed max instance count!");
+        return NULL;
+    }

    for (uint8_t i = 0; i < idx; i++) // 检查是否已经注册过
        if (usart_instance[i]->usart_handle == init_config->usart_handle)
-            while (1)
-                LOGERROR("[bsp_usart] USART instance already registered!");
+        {
+            LOGERROR("[bsp_usart] USART instance already registered!");
+            return NULL;
+        }

-    USART_Instance *instance = (USART_Instance *) malloc(sizeof(USART_Instance));
+    USART_Instance *instance = &usart_instance_pool[idx];
    memset(instance, 0, sizeof(USART_Instance));

    instance->usart_handle = init_config->usart_handle;
@@ -55,7 +128,6 @@ USART_Instance *USARTRegister(USART_Init_Config_s *init_config)
    instance->module_callback = init_config->module_callback;

    usart_instance[idx++] = instance;
-    USARTServiceInit(instance);
    return instance;
 }

@@ -82,10 +154,8 @@ void USARTSend(USART_Instance *_instance, uint8_t *send_buf, uint16_t send_size,
 /* 串口发送时,gstate会被设为BUSY_TX */
 uint8_t USARTIsReady(USART_Instance *_instance)
 {
-    if (_instance->usart_handle->gState | HAL_UART_STATE_BUSY_TX)
-        return 0;
-    else
-        return 1;
+    return _instance != NULL && _instance->usart_handle != NULL &&
+           _instance->usart_handle->gState == HAL_UART_STATE_READY;
 }

 /**
@@ -97,27 +167,22 @@ uint8_t USARTIsReady(USART_Instance *_instance)
 *        我们只希望处理，因此直接关闭DMA半传输中断第一种和第三种情况
 *
 * @param huart 发生中断的串口
- * @param Size 此次接收到的总数居量,暂时没用
+ * @param Size 此次接收到的数据量
 */
 void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size)
 {
-    for (uint8_t i = 0; i < idx; ++i)
-    {
-        // find the instance which is being handled
-        if (huart == usart_instance[i]->usart_handle)
-        {
-            // call the callback function if it is not NULL
-            if (usart_instance[i]->module_callback != NULL)
-            {
-                usart_instance[i]->module_callback();
-                memset(usart_instance[i]->recv_buff, 0, Size); // 接收结束后清空buffer,对于变长数据是必要的
-            }
-            HAL_UARTEx_ReceiveToIdle_DMA(usart_instance[i]->usart_handle, usart_instance[i]->recv_buff,
-                                         usart_instance[i]->recv_buff_size);
-            __HAL_DMA_DISABLE_IT(usart_instance[i]->usart_handle->hdmarx, DMA_IT_HT);
-            return; // break the loop
-        }
-    }
+    USART_Instance *instance = USARTFindInstance(huart);
+    if (instance == NULL)
+        return;
+
+    instance->rx_event_count++;
+    instance->last_rx_size = Size;
+
+    if (Size > 0 && Size <= instance->recv_buff_size && instance->module_callback != NULL)
+        instance->module_callback(instance, instance->recv_buff, Size);
+
+    if (USARTServiceInit(instance) != HAL_OK)
+        instance->rx_restart_error_count++;
 }

 /**
@@ -129,17 +194,15 @@ void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size)
 */
 void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
 {
-    for (uint8_t i = 0; i < idx; ++i)
-    {
-        if (huart == usart_instance[i]->usart_handle)
-        {
-            HAL_UARTEx_ReceiveToIdle_DMA(usart_instance[i]->usart_handle, usart_instance[i]->recv_buff,
-                                         usart_instance[i]->recv_buff_size);
-            __HAL_DMA_DISABLE_IT(usart_instance[i]->usart_handle->hdmarx, DMA_IT_HT);
-            LOGWARNING("[bsp_usart] USART error callback triggered, instance idx [%d]", i);
-            return;
-        }
-    }
+    USART_Instance *instance = USARTFindInstance(huart);
+    if (instance == NULL)
+        return;
+
+    instance->uart_error_count++;
+    instance->last_uart_error = HAL_UART_GetError(huart);
+
+    if (USARTServiceInit(instance) != HAL_OK)
+        instance->rx_restart_error_count++;
 }


--- a/User_Code/bsp/usart/bsp_usart.h
+++ b/User_Code/bsp/usart/bsp_usart.h
@@ -7,8 +7,10 @@
 #define DEVICE_USART_CNT 5     // 喵板至多分配5个串口
 #define USART_RXBUFF_LIMIT 256 // 如果协议需要更大的buff,请修改这里

+typedef struct usart_instance USART_Instance;
+
 // 模块回调函数,用于解析协议
-typedef void (*usart_module_callback)();
+typedef void (*usart_module_callback)(USART_Instance *instance, const uint8_t *recv_data, uint16_t recv_size);

 /* 发送模式枚举 */
 typedef enum
@@ -21,18 +23,24 @@ typedef enum

 // 串口实例结构体,每个module都要包含一个实例.
 // 由于串口是独占的点对点通信,所以不需要考虑多个module同时使用一个串口的情况,因此不用加入id;当然也可以选择加入,这样在bsp层可以访问到module的其他信息
-typedef struct
+struct usart_instance
 {
-    uint8_t recv_buff[USART_RXBUFF_LIMIT]; // 预先定义的最大buff大小,如果太小请修改USART_RXBUFF_LIMIT
-    uint8_t recv_buff_size; // 模块接收一包数据的大小
+    uint8_t recv_buff[USART_RXBUFF_LIMIT] __attribute__((aligned(32))); // DMA接收buffer
+    uint16_t recv_buff_size; // 模块接收一包数据的大小
    UART_HandleTypeDef *usart_handle; // 实例对应的usart_handle
    usart_module_callback module_callback; // 解析收到的数据的回调函数
-} USART_Instance;
+    volatile uint32_t rx_event_count;
+    volatile uint32_t uart_error_count;
+    volatile uint32_t rx_restart_error_count;
+    volatile uint32_t last_uart_error;
+    volatile uint16_t last_rx_size;
+    volatile uint8_t rx_restart_pending;
+};

 /* usart 初始化配置结构体 */
 typedef struct
 {
-    uint8_t recv_buff_size; // 模块接收一包数据的大小
+    uint16_t recv_buff_size; // 模块接收一包数据的大小
    UART_HandleTypeDef *usart_handle; // 实例对应的usart_handle
    usart_module_callback module_callback; // 解析收到的数据的回调函数
 } USART_Init_Config_s;
@@ -45,11 +53,16 @@ typedef struct
 USART_Instance *USARTRegister(USART_Init_Config_s *init_config);

 /**
- * @brief 启动串口服务,需要传入一个usart实例.一般用于lost callback的情况(使用串口的模块daemon)
+ * @brief 启动串口DMA接收服务,需要传入一个已注册的usart实例
 *
 * @param _instance
 */
-void USARTServiceInit(USART_Instance *_instance);
+HAL_StatusTypeDef USARTServiceInit(USART_Instance *_instance);
+
+/**
+ * @brief 在任务上下文中恢复中断回调里启动失败的串口接收
+ */
+void USARTServiceTask(void);


 /**
--- a/User_Code/module/paramdef/robot_def.h
+++ b/User_Code/module/paramdef/robot_def.h
@@ -13,7 +13,7 @@ typedef enum
    // 添加其他模式
 } RobotMode_t; //机器人控制模式

-extern RobotMode_t RobotMode;
+extern volatile RobotMode_t RobotMode;


 // #pragma pack() // 开启字节对齐,结束前面的#pragma pack(1)
--- a/User_Code/module/periph/buzzer/buzzer.cpp
+++ b/User_Code/module/periph/buzzer/buzzer.cpp
@@ -313,9 +313,9 @@ void systemstart_song(void)
 	// buzzer_note(120, 0.5); //高音sol
 	// HAL_Delay(550);

-	// SongSpring(); //为什么要演奏春日影！！！
+	//SongSpring(); //为什么要演奏春日影！！！

-	// SongLaoda();
+	//SongLaoda();

 	buzzer_off();
 }
--- a/User_Code/module/periph/remote_control/rc.c
+++ b/User_Code/module/periph/remote_control/rc.c
@@ -77,23 +77,31 @@

 #define REMOTE_CONTROL_FRAME_SIZE 25u // 遥控器接收的buffer大小

-//@todo：测试define
-#define REMOTE_FS_I6X
-
 // 定义SBUS协议的起始标志
 #define SBUS_HEAD 0X0F

 // 定义SBUS协议的结束标志
 #define SBUS_END 0X00
+#define SBUS_FLAG_FRAME_LOST (1u << 2)
+#define SBUS_FLAG_FAILSAFE   (1u << 3)

 // 遥控器数据
 static RC_ctrl_t rc_ctrl[2]; //[0]:当前数据TEMP,[1]:上一次的数据LAST.用于按键持续按下和切换的判断
 static uint8_t rc_init_flag = 0; // 遥控器初始化标志位
+static volatile uint8_t rc_data_valid = 0;
+static volatile uint32_t rc_valid_frame_count = 0;
+static volatile uint32_t rc_invalid_frame_count = 0;
+static volatile uint32_t rc_failsafe_count = 0;

 // 遥控器拥有的串口实例,因为遥控器是单例,所以这里只有一个,就不封装了
 static USART_Instance *rc_usart_instance;
 static Daemon_Instance *rc_daemon_instance;

+static uint8_t SBusEndByteIsValid(uint8_t value)
+{
+    return value == SBUS_END || value == 0x04u || value == 0x14u || value == 0x24u || value == 0x34u;
+}
+

 #ifdef REMOTE_DJI_DT7
 /**
@@ -112,8 +120,11 @@ static void RectifyRCjoystick()
 *
 * @param sbus_buf 接收buffer
 */
-static void sbus_to_rc(const uint8_t *sbus_buf)
+static uint8_t sbus_to_rc(const uint8_t *sbus_buf, uint16_t size)
 {
+    if (size != 18u)
+        return 0;
+
    // 摇杆,直接解算时减去偏置
    rc_ctrl[TEMP].rc.rocker_r_ = ((sbus_buf[0] | (sbus_buf[1] << 8)) & 0x07ff) - RC_CH_VALUE_OFFSET; //!< Channel 0
    rc_ctrl[TEMP].rc.rocker_r1 = (((sbus_buf[1] >> 3) | (sbus_buf[2] << 5)) & 0x07ff) - RC_CH_VALUE_OFFSET;
@@ -169,6 +180,7 @@ static void sbus_to_rc(const uint8_t *sbus_buf)
    }

    memcpy(&rc_ctrl[LAST], &rc_ctrl[TEMP], sizeof(RC_ctrl_t)); // 保存上一次的数据,用于按键持续按下和切换的判断
+    return 1;
 }
 #endif

@@ -178,7 +190,7 @@ static void sbus_to_rc(const uint8_t *sbus_buf)
 *
 * @param sbus_buf 接收buffer
 */
-static void sbus_to_rc(const uint8_t *sbus_buf)
+static uint8_t sbus_to_rc(const uint8_t *sbus_buf, uint16_t size)
 {
    // // 摇杆,直接解算时减去偏置
    // rc_ctrl[TEMP].rc.rocker_r_ = ((sbus_buf[0] | (sbus_buf[1] << 8)) & 0x07ff) - RC_CH_VALUE_OFFSET;                              //!< Channel 0
@@ -230,8 +242,11 @@ static void sbus_to_rc(const uint8_t *sbus_buf)
    //         rc_ctrl[TEMP].key_count[KEY_PRESS_WITH_SHIFT][i]++;
    // }

-    if ((sbus_buf[0] != SBUS_HEAD) || (sbus_buf[24] != SBUS_END))
-        return;
+    if (size != REMOTE_CONTROL_FRAME_SIZE || sbus_buf[0] != SBUS_HEAD || !SBusEndByteIsValid(sbus_buf[24]))
+        return 0;
+
+    if ((sbus_buf[23] & (SBUS_FLAG_FRAME_LOST | SBUS_FLAG_FAILSAFE)) != 0u)
+        return 0;

    // if (sbus_buf[23] == 0x0C)
    // 	rc_ctrl->online = 0;
@@ -261,20 +276,18 @@ static void sbus_to_rc(const uint8_t *sbus_buf)
    // rc_ctrl[TEMP].rc.ch[9] = ((sbus_buf[12] >> 3 | sbus_buf[13] << 5) & 0x07FF);			   // 通道10 (VrB旋钮)

    rc_ctrl[TEMP].sw_a = (rc_ctrl[TEMP].rc.ch[4] == 0x00F0) ? RC_SW_UP : RC_SW_DOWN;
-    rc_ctrl[TEMP].sw_b = rc_ctrl[TEMP].rc.ch[5]; //3档
-    rc_ctrl[TEMP].sw_c = rc_ctrl[TEMP].rc.ch[6]; //3档
    rc_ctrl[TEMP].sw_d = (rc_ctrl[TEMP].rc.ch[7] == 0x00F0) ? RC_SW_UP : RC_SW_DOWN;

    // 解析SWB状态
-    if (rc_ctrl[TEMP].rc.ch[6] == 0x00F0)
+    if (rc_ctrl[TEMP].rc.ch[5] == 0x00F0)
    {
        rc_ctrl[TEMP].sw_b = RC_SW_UP;
    }
-    else if (rc_ctrl[TEMP].rc.ch[6] == 0x0400)
+    else if (rc_ctrl[TEMP].rc.ch[5] == 0x0400)
    {
        rc_ctrl[TEMP].sw_b = RC_SW_MID;
    }
-    else if (rc_ctrl[TEMP].rc.ch[6] == 0x070F)
+    else if (rc_ctrl[TEMP].rc.ch[5] == 0x070F)
    {
        rc_ctrl[TEMP].sw_b = RC_SW_DOWN;
    }
@@ -283,27 +296,14 @@ static void sbus_to_rc(const uint8_t *sbus_buf)
        rc_ctrl[TEMP].sw_b = 0;
    }

-    if (rc_ctrl[TEMP].sw_b != rc_ctrl[TEMP].sw_b_last)
-    {
-        if (rc_ctrl[TEMP].sw_b == RC_SW_UP)
-        {
-            rc_ctrl[TEMP].sw_b_midtoup_flag = 1;
-            rc_ctrl[TEMP].sw_b_uptomid_flag = 0;
-            rc_ctrl[TEMP].sw_b_midtodown_flag = 0;
-        }
-        else if (rc_ctrl[TEMP].sw_b == RC_SW_MID)
-        {
-            rc_ctrl[TEMP].sw_b_midtoup_flag = 0;
-            rc_ctrl[TEMP].sw_b_uptomid_flag = 1;
-            rc_ctrl[TEMP].sw_b_midtodown_flag = 0;
-        }
-        else if (rc_ctrl[TEMP].sw_b == RC_SW_DOWN)
-        {
-            rc_ctrl[TEMP].sw_b_midtoup_flag = 0;
-            rc_ctrl[TEMP].sw_b_uptomid_flag = 0;
-            rc_ctrl[TEMP].sw_b_midtodown_flag = 1;
-        }
-    }
+    rc_ctrl[TEMP].sw_b_midtoup_flag =
+        rc_ctrl[TEMP].sw_b_last == RC_SW_MID && rc_ctrl[TEMP].sw_b == RC_SW_UP;
+    rc_ctrl[TEMP].sw_b_uptomid_flag =
+        rc_ctrl[TEMP].sw_b_last == RC_SW_UP && rc_ctrl[TEMP].sw_b == RC_SW_MID;
+    rc_ctrl[TEMP].sw_b_midtodown_flag =
+        rc_ctrl[TEMP].sw_b_last == RC_SW_MID && rc_ctrl[TEMP].sw_b == RC_SW_DOWN;
+    rc_ctrl[TEMP].sw_b_downtomid_flag =
+        rc_ctrl[TEMP].sw_b_last == RC_SW_DOWN && rc_ctrl[TEMP].sw_b == RC_SW_MID;
    rc_ctrl[TEMP].sw_b_last = rc_ctrl[TEMP].sw_b;

    // 解析SWC状态
@@ -324,46 +324,22 @@ static void sbus_to_rc(const uint8_t *sbus_buf)
        rc_ctrl[TEMP].sw_c = 0;
    }

-    if (rc_ctrl[TEMP].sw_c != rc_ctrl[TEMP].sw_c_last)
-    {
-        if (rc_ctrl[TEMP].sw_c == RC_SW_UP)
-        {
-            rc_ctrl[TEMP].sw_c_midtoup_flag = 1;
-            rc_ctrl[TEMP].sw_c_uptomid_flag = 0;
-            rc_ctrl[TEMP].sw_c_midtodown_flag = 0;
-        }
-        else if (rc_ctrl[TEMP].sw_c == RC_SW_MID)
-        {
-            rc_ctrl[TEMP].sw_c_midtoup_flag = 0;
-            rc_ctrl[TEMP].sw_c_uptomid_flag = 1;
-            rc_ctrl[TEMP].sw_c_midtodown_flag = 0;
-        }
-        else if (rc_ctrl[TEMP].sw_c == RC_SW_DOWN)
-        {
-            rc_ctrl[TEMP].sw_c_midtoup_flag = 0;
-            rc_ctrl[TEMP].sw_c_uptomid_flag = 0;
-            rc_ctrl[TEMP].sw_c_midtodown_flag = 1;
-        }
-    }
+    rc_ctrl[TEMP].sw_c_midtoup_flag =
+        rc_ctrl[TEMP].sw_c_last == RC_SW_MID && rc_ctrl[TEMP].sw_c == RC_SW_UP;
+    rc_ctrl[TEMP].sw_c_uptomid_flag =
+        rc_ctrl[TEMP].sw_c_last == RC_SW_UP && rc_ctrl[TEMP].sw_c == RC_SW_MID;
+    rc_ctrl[TEMP].sw_c_midtodown_flag =
+        rc_ctrl[TEMP].sw_c_last == RC_SW_MID && rc_ctrl[TEMP].sw_c == RC_SW_DOWN;
+    rc_ctrl[TEMP].sw_c_downtomid_flag =
+        rc_ctrl[TEMP].sw_c_last == RC_SW_DOWN && rc_ctrl[TEMP].sw_c == RC_SW_MID;
    rc_ctrl[TEMP].sw_c_last = rc_ctrl[TEMP].sw_c;

-    // SWA和SWB的状态变化
-    if (rc_ctrl[TEMP].sw_a != rc_ctrl[TEMP].sw_a_last)
-    {
-        rc_ctrl[TEMP].sw_a_up_to_down_flag = (rc_ctrl[TEMP].sw_a == RC_SW_UP) ? 1 : 0;
-    }
+    // SWA和SWD的下降沿
+    rc_ctrl[TEMP].sw_a_up_to_down_flag =
+        rc_ctrl[TEMP].sw_a_last == RC_SW_UP && rc_ctrl[TEMP].sw_a == RC_SW_DOWN;
    rc_ctrl[TEMP].sw_a_last = rc_ctrl[TEMP].sw_a;
-
-    // if (rc_ctrl[TEMP].sw_b != rc_ctrl[TEMP].sw_b_last) {
-    //     rc_ctrl[TEMP].sw_b_up_to_down_flag = (rc_ctrl[TEMP].sw_b == RC_SW_UP) ? 1 : 0;
-    // }
-    // rc_ctrl[TEMP].sw_b_last = rc_ctrl[TEMP].sw_b;
-
-    // SWD的状态变化
-    if (rc_ctrl[TEMP].sw_d != rc_ctrl[TEMP].sw_d_last)
-    {
-        rc_ctrl[TEMP].sw_d_up_to_down_flag = (rc_ctrl[TEMP].sw_d == RC_SW_UP) ? 1 : 0;
-    }
+    rc_ctrl[TEMP].sw_d_up_to_down_flag =
+        rc_ctrl[TEMP].sw_d_last == RC_SW_UP && rc_ctrl[TEMP].sw_d == RC_SW_DOWN;
    rc_ctrl[TEMP].sw_d_last = rc_ctrl[TEMP].sw_d;

    // 修正 ch1~ch4
@@ -374,17 +350,54 @@ static void sbus_to_rc(const uint8_t *sbus_buf)
    // ...existing code...

    memcpy(&rc_ctrl[LAST], &rc_ctrl[TEMP], sizeof(RC_ctrl_t)); // 保存上一次的数据,用于按键持续按下和切换的判断
+    return 1;
 }
 #endif

+static void RemoteControlPublishOffline(uint8_t force)
+{
+    uint32_t primask = __get_PRIMASK();
+    __disable_irq();
+
+    uint8_t daemon_expired = rc_daemon_instance != NULL && rc_daemon_instance->temp_count == 0;
+    if (force || daemon_expired)
+    {
+        rc_data_valid = 0;
+        memset(rc_ctrl, 0, sizeof(rc_ctrl));
+        if (RobotMode != SYS_ERROR_OCCURRED)
+            RobotMode = REMOTE_NOT_CONNECTED;
+    }
+
+    __set_PRIMASK(primask);
+}
+
 /**
 * @brief 对sbus_to_rc的简单封装,用于注册到bsp_usart的回调函数中
 *
 */
-static void RemoteControlRxCallback()
+static void RemoteControlRxCallback(USART_Instance *instance, const uint8_t *recv_data, uint16_t recv_size)
 {
-    sbus_to_rc(rc_usart_instance->recv_buff); // 进行协议解析
-    DaemonReload(rc_daemon_instance); // 先喂狗
+    (void) instance;
+
+    if (recv_size == REMOTE_CONTROL_FRAME_SIZE && recv_data[0] == SBUS_HEAD &&
+        SBusEndByteIsValid(recv_data[24]) && (recv_data[23] & SBUS_FLAG_FAILSAFE) != 0u)
+    {
+        rc_failsafe_count++;
+        RemoteControlPublishOffline(1);
+        return;
+    }
+
+    if (!sbus_to_rc(recv_data, recv_size))
+    {
+        rc_invalid_frame_count++;
+        return;
+    }
+
+    rc_valid_frame_count++;
+    rc_data_valid = 1;
+    DaemonReload(rc_daemon_instance);
+    if (RobotMode == REMOTE_NOT_CONNECTED)
+        RobotMode = REMOTE_CONNECTED;
 }

 /**
@@ -393,38 +406,74 @@ static void RemoteControlRxCallback()
 */
 static void RCLostCallback(void *id)
 {
-    memset(rc_ctrl, 0, sizeof(rc_ctrl)); // 清空遥控器数据
-    USARTServiceInit(rc_usart_instance); // 尝试重新启动接收
-
-    RobotMode = REMOTE_NOT_CONNECTED;
+    (void) id;
+    RemoteControlPublishOffline(0);

    // LEDErrLog(0, LED_COLOR_R); // 红灯常亮 表示遥控器离线
 }

 RC_ctrl_t *RemoteControlInit(UART_HandleTypeDef *rc_usart_handle)
 {
-    USART_Init_Config_s conf;
-    conf.module_callback = RemoteControlRxCallback;
-    conf.usart_handle = rc_usart_handle;
-    conf.recv_buff_size = REMOTE_CONTROL_FRAME_SIZE;
+    if (rc_init_flag)
+        return &rc_ctrl[TEMP];
+    if (rc_usart_handle == NULL || rc_usart_handle->hdmarx == NULL)
+        return NULL;

-    rc_usart_instance = USARTRegister(&conf);
+    memset(rc_ctrl, 0, sizeof(rc_ctrl));
+    rc_data_valid = 0;

-    // 进行守护进程的注册,用于定时检查遥控器是否正常工作
-    Daemon_Init_Config_s daemon_conf = {
-        .reload_count = 10, // 100ms未收到数据视为离线,遥控器的接收频率实际上是1000/14Hz(大约70Hz)
-        .callback = RCLostCallback,
-        .owner_id = NULL, // 只有1个遥控器,不需要owner_id
-    };
-    rc_daemon_instance = DaemonRegister(&daemon_conf);
+    if (rc_usart_instance == NULL)
+    {
+        USART_Init_Config_s conf = {
+            .module_callback = RemoteControlRxCallback,
+            .usart_handle = rc_usart_handle,
+            .recv_buff_size = REMOTE_CONTROL_FRAME_SIZE,
+        };
+        rc_usart_instance = USARTRegister(&conf);
+        if (rc_usart_instance == NULL)
+            return NULL;
+    }
+
+    if (rc_daemon_instance == NULL)
+    {
+        // 100ms未收到有效数据视为离线,SBUS接收频率约70Hz.
+        Daemon_Init_Config_s daemon_conf = {
+            .reload_count = 10,
+            .callback = RCLostCallback,
+            .owner_id = NULL,
+        };
+        rc_daemon_instance = DaemonRegister(&daemon_conf);
+    }

    rc_init_flag = 1;
-    return rc_ctrl;
+    if (USARTServiceInit(rc_usart_instance) != HAL_OK)
+        rc_usart_instance->rx_restart_error_count++;
+    return &rc_ctrl[TEMP];
 }

-uint8_t RemoteControlIsOnline()
+uint8_t RemoteControlReadSnapshot(RC_ctrl_t *out)
 {
-    if (rc_init_flag)
-        return DaemonIsOnline(rc_daemon_instance);
-    return 0;
+    if (out == NULL)
+        return 0;
+
+    uint32_t primask = __get_PRIMASK();
+    __disable_irq();
+    uint8_t valid = rc_init_flag && rc_data_valid && rc_daemon_instance != NULL &&
+                    rc_daemon_instance->temp_count > 0;
+    if (valid)
+        memcpy(out, &rc_ctrl[TEMP], sizeof(*out));
+    __set_PRIMASK(primask);
+
+    return valid;
+}
+
+uint8_t RemoteControlIsOnline(void)
+{
+    uint32_t primask = __get_PRIMASK();
+    __disable_irq();
+    uint8_t online = rc_init_flag && rc_data_valid && rc_daemon_instance != NULL &&
+                     rc_daemon_instance->temp_count > 0;
+    __set_PRIMASK(primask);
+
+    return online;
 }
--- a/User_Code/module/periph/remote_control/rc.h
+++ b/User_Code/module/periph/remote_control/rc.h
@@ -125,21 +125,30 @@ typedef struct
    uint8_t key_count[3][16];
 } RC_ctrl_t;
 #endif // FSI6X
+
 /* ------------------------- Internal Data ----------------------------------- */

 /**
 * @brief 初始化遥控器,该函数会将遥控器注册到串口
 *
- * @attention 注意分配正确的串口硬件,遥控器在C板上使用USART3
+ * @attention 当前板级配置使用UART5/PD2接收SBUS
 *
 */
 RC_ctrl_t *RemoteControlInit(UART_HandleTypeDef *rc_usart_handle);

+/**
+ * @brief 原子复制当前遥控器数据
+ *
+ * @param out 接收遥控器数据快照
+ * @return uint8_t 1:快照有效 0:未初始化、离线或参数无效
+ */
+uint8_t RemoteControlReadSnapshot(RC_ctrl_t *out);
+
 /**
 * @brief 检查遥控器是否在线,若尚未初始化也视为离线
 *
 * @return uint8_t 1:在线 0:离线
 */
-uint8_t RemoteControlIsOnline();
+uint8_t RemoteControlIsOnline(void);

 #endif // REMOTE_H
--- a/User_Code/module/software/daemon/daemon.c
+++ b/User_Code/module/software/daemon/daemon.c
@@ -1,6 +1,7 @@
 #include "daemon.h"
 #include "bsp_dwt.h"
 #include "cmsis_os2.h"
+#include "main.h"
 #include "memory.h"
 #include "stdlib.h"

@@ -16,8 +17,7 @@ Daemon_Instance *DaemonRegister(Daemon_Init_Config_s *config)
    daemon_instance->id = config->owner_id;
    daemon_instance->reload_count = config->reload_count == 0 ? 100 : config->reload_count; // 默认重载值为100
    daemon_instance->callback = config->callback;
-    daemon_instance->temp_count = config->init_count == 0 ? 100 : config->init_count; // 默认上线等待时间为100
-    daemon_instance->temp_count = config->reload_count;
+    daemon_instance->temp_count = config->init_count == 0 ? daemon_instance->reload_count : config->init_count;

    daemon_instances[idx++] = daemon_instance;

@@ -31,7 +31,13 @@ Daemon_Instance *DaemonRegister(Daemon_Init_Config_s *config)
 */
 void DaemonReload(Daemon_Instance *daemon)
 {
+    if (daemon == NULL)
+        return;
+
+    uint32_t primask = __get_PRIMASK();
+    __disable_irq();
    daemon->temp_count = daemon->reload_count;
+    __set_PRIMASK(primask);
 }

 /**
@@ -42,7 +48,14 @@ void DaemonReload(Daemon_Instance *daemon)
 */
 uint8_t DaemonIsOnline(Daemon_Instance *daemon)
 {
-    return daemon->temp_count > 0;
+    if (daemon == NULL)
+        return 0;
+
+    uint32_t primask = __get_PRIMASK();
+    __disable_irq();
+    uint8_t online = daemon->temp_count > 0;
+    __set_PRIMASK(primask);
+    return online;
 }

 /**
@@ -61,9 +74,17 @@ void Daemon_Update(void) // 名字改掉，不要叫 Task，避免和 RTOS 线
    for (uint8_t i = 0; i < idx; i++)
    {
        daemon = daemon_instances[i];
+        uint8_t expired = 0;
+
+        uint32_t primask = __get_PRIMASK();
+        __disable_irq();
        if (daemon->temp_count > 0)
            daemon->temp_count--;
-        else if (daemon->callback != NULL)
+        else
+            expired = 1;
+        __set_PRIMASK(primask);
+
+        if (expired && daemon->callback != NULL)
            daemon->callback(daemon->id);
    }
 }
--- a/User_Code/module/software/daemon/daemon.h
+++ b/User_Code/module/software/daemon/daemon.h
@@ -25,7 +25,7 @@ typedef struct daemon_ins
    uint16_t reload_count; // 重载值
    offline_callback callback; // 离线处理函数,当模块离线时调用

-    uint16_t temp_count; // 当前值,减为零说明模块离线或异常
+    volatile uint16_t temp_count; // 当前值,减为零说明模块离线或异常
    void *id; // 模块id,用于标识模块,初始化时传入
 } Daemon_Instance;

--- a/ozonedeb/windebnewestux.jdebug
+++ b/ozonedeb/windebnewestux.jdebug
@@ -23,7 +23,7 @@ void OnProjectLoad (void) {
  // Dialog-generated settings
  //
  Project.SetDevice ("STM32H723VG");
-  Project.SetHostIF ("USB", "602712948");
+  Project.SetHostIF ("USB", "63728936");
  Project.SetTargetIF ("SWD");
  Project.SetTIFSpeed ("4 MHz");
  Project.AddPathSubstitute ("D:/RM/Elec Control/TronOneH7_Scaffold/ozonedeb", "$(ProjectDir)");
--- a/ozonedeb/windebnewestux.jdebug.user
+++ b/ozonedeb/windebnewestux.jdebug.user
@@ -4,15 +4,15 @@ Breakpoint=D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/module/periph/power_m
 GraphedExpression="(QEKF_INS).Roll", Color=#a00909
 GraphedExpression="(BMI088).Temperature", Color=#09a01b
 GraphedExpression="(QEKF_INS).Pitch", Color=#09a087
-OpenDocument="bsp_dwt.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/bsp/dwt/bsp_dwt.c", Line=59
-OpenDocument="stm32h7xx_hal_spi.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_spi.c", Line=1553
-OpenDocument="tasks.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Middlewares/Third_Party/FreeRTOS/Source/tasks.c", Line=2295
+OpenDocument="main.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Core/Src/main.c", Line=72
+OpenDocument="stm32h7xx_hal_spi.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_spi.c", Line=958
+OpenDocument="tasks.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Middlewares/Third_Party/FreeRTOS/Source/tasks.c", Line=2306
 OpenDocument="delayticks.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/bsp/delayticks/delayticks.c", Line=4
-OpenDocument="dev_cmd.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/user_task/dev_tasks/dev_cmd.c", Line=23
-OpenDocument="main.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Core/Src/main.c", Line=71
+OpenDocument="dev_cmd.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/user_task/dev_tasks/dev_cmd.c", Line=0
+OpenDocument="stm32h7xx_it.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Core/Src/stm32h7xx_it.c", Line=306
 OpenDocument="xidipwmeter.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/module/periph/power_meters/xiditech/xidipwmeter.c", Line=37
 OpenDocument="stm32h7xx_hal.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c", Line=331
-OpenDocument="stm32h7xx_it.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/Core/Src/stm32h7xx_it.c", Line=306
+OpenDocument="bsp_dwt.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/bsp/dwt/bsp_dwt.c", Line=109
 OpenDocument="QuaternionEKF.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/module/algorithm/ekf/QuaternionEKF.c", Line=436
 OpenDocument="buzzer.cpp", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/module/periph/buzzer/buzzer.cpp", Line=319
 OpenDocument="rc.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/module/periph/remote_control/rc.c", Line=0
@@ -30,35 +30,35 @@ OpenDocument="ws2812.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Co
 OpenDocument="ins_task.c", FilePath="D:/RM/Elec Control/TronOneH7_Scaffold/User_Code/module/periph/imu/ins_task.c", Line=0
 OpenToolbar="Debug", Floating=0, x=0, y=0
 OpenToolbar="Breakpoints", Floating=0, x=1, y=0
-OpenWindow="Call Stack", DockArea=RIGHT, x=0, y=0, w=681, h=324, TabPos=0, TopOfStack=1, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
-OpenWindow="Registers 1", DockArea=BOTTOM, x=1, y=0, w=361, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, FilteredItems=[], RefreshRate=1
-OpenWindow="Source Files", DockArea=LEFT, x=0, y=0, w=663, h=273, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
-OpenWindow="Disassembly", DockArea=BOTTOM, x=2, y=0, w=629, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
-OpenWindow="Break & Tracepoints", DockArea=LEFT, x=0, y=1, w=663, h=240, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, VectorCatchIndexMask=254
-OpenWindow="Memory 1", DockArea=BOTTOM, x=3, y=0, w=465, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, EditorAddress=0x2000B98C
-OpenWindow="Global Data", DockArea=RIGHT, x=0, y=2, w=681, h=377, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
-OpenWindow="Watched Data 1", DockArea=LEFT, x=0, y=2, w=663, h=313, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
-OpenWindow="Functions", DockArea=LEFT, x=0, y=3, w=663, h=246, TabPos=1, TopOfStack=0, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
-OpenWindow="Call Graph", DockArea=LEFT, x=0, y=3, w=663, h=246, TabPos=2, TopOfStack=1, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
-OpenWindow="Data Sampling", DockArea=BOTTOM, x=0, y=0, w=1102, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, VisibleTab=0, UniformSampleSpacing=0
-OpenWindow="Timeline", DockArea=RIGHT, x=0, y=1, w=681, h=372, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=1, DataPaneShown=1, PowerPaneShown=0, CodePaneShown=0, PinCursor="Cursor Movable", TimePerDiv="1 s / Div", TimeStampFormat="Time", DataGraphDrawAsPoints=0, DataGraphLegendShown=1, DataGraphUniformSampleSpacing=0, DataGraphLegendPosition="0;0", PowerGraphDrawAsPoints=0, PowerGraphLegendShown=0, PowerGraphAvgFilterTime=Off, PowerGraphAvgFilterLen=Off, PowerGraphUniformSampleSpacing=0, PowerGraphLegendPosition="459;-65", CodeGraphLegendShown=0, CodeGraphLegendPosition="475;0"
-OpenWindow="Console", DockArea=LEFT, x=0, y=3, w=663, h=246, TabPos=0, TopOfStack=0, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
-OpenWindow="FreeRTOS", DockArea=RIGHT, x=0, y=0, w=681, h=324, TabPos=1, TopOfStack=0, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, Showing="Task List"
+OpenWindow="Call Stack", DockArea=RIGHT, x=0, y=0, w=681, h=225, TabPos=0, TopOfStack=1, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Registers 1", DockArea=BOTTOM, x=1, y=0, w=271, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, FilteredItems=[], RefreshRate=1
+OpenWindow="Source Files", DockArea=LEFT, x=0, y=0, w=663, h=189, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Disassembly", DockArea=BOTTOM, x=2, y=0, w=472, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Break & Tracepoints", DockArea=LEFT, x=0, y=1, w=663, h=176, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, VectorCatchIndexMask=254
+OpenWindow="Memory 1", DockArea=BOTTOM, x=3, y=0, w=348, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, EditorAddress=0x2000B98C
+OpenWindow="Global Data", DockArea=RIGHT, x=0, y=2, w=681, h=260, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Watched Data 1", DockArea=LEFT, x=0, y=2, w=663, h=206, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Functions", DockArea=LEFT, x=0, y=3, w=663, h=168, TabPos=1, TopOfStack=0, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Call Graph", DockArea=LEFT, x=0, y=3, w=663, h=168, TabPos=2, TopOfStack=1, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="Data Sampling", DockArea=BOTTOM, x=0, y=0, w=826, h=181, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, VisibleTab=0, UniformSampleSpacing=0
+OpenWindow="Timeline", DockArea=RIGHT, x=0, y=1, w=681, h=255, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=1, DataPaneShown=1, PowerPaneShown=0, CodePaneShown=0, PinCursor="Cursor Movable", TimePerDiv="1 s / Div", TimeStampFormat="Time", DataGraphDrawAsPoints=0, DataGraphLegendShown=1, DataGraphUniformSampleSpacing=0, DataGraphLegendPosition="0;0", PowerGraphDrawAsPoints=0, PowerGraphLegendShown=0, PowerGraphAvgFilterTime=Off, PowerGraphAvgFilterLen=Off, PowerGraphUniformSampleSpacing=0, PowerGraphLegendPosition="484;-16", CodeGraphLegendShown=0, CodeGraphLegendPosition="498;0"
+OpenWindow="Console", DockArea=LEFT, x=0, y=3, w=663, h=168, TabPos=0, TopOfStack=0, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0
+OpenWindow="FreeRTOS", DockArea=RIGHT, x=0, y=0, w=681, h=225, TabPos=1, TopOfStack=0, FilterBarShown=0, TotalValueBarShown=0, ToolBarShown=0, Showing="Task List"
+TableHeader="Call Graph", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Stack Total";"Stack Local";"Code Total";"Code Local";"Depth";"Called From"], ColWidths=[384;100;100;100;100;100;102]
 TableHeader="Task List", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Run Count";"Priority";"Status";"Timeout";"Stack Info (Free / Size)";"ID";"Mutex Count";"Notified Value";"Notify State"], ColWidths=[110;110;110;110;110;110;110;110;110;110]
 TableHeader="Functions", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Address";"Size";"#Insts";"Source"], ColWidths=[1164;100;100;100;100]
-TableHeader="Global Data", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Location";"Size";"Type";"Scope"], ColWidths=[222;130;100;54;95;486]
+TableHeader="Global Data", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Location";"Size";"Type";"Scope"], ColWidths=[222;130;100;54;95;100]
 TableHeader="Vector Catches", SortCol="None", SortOrder="ASCENDING", VisibleCols=["";"Vector Catch";"Description"], ColWidths=[50;300;500]
 TableHeader="Break & Tracepoints", SortCol="None", SortOrder="ASCENDING", VisibleCols=["";"Type";"Location";"Extras"], ColWidths=[100;100;142;321]
-TableHeader="Source Files", SortCol="File", SortOrder="ASCENDING", VisibleCols=["File";"Status";"Size";"#Insts";"Path"], ColWidths=[229;100;100;100;1046]
-TableHeader="Data Sampling Table", SortCol="Index", SortOrder="ASCENDING", VisibleCols=["Index";"Time";" (QEKF_INS).Roll";" (BMI088).Temperature";" (QEKF_INS).Pitch"], ColWidths=[100;100;100;100;100]
-TableHeader="Data Sampling Setup", SortCol="Expression", SortOrder="ASCENDING", VisibleCols=["Expression";"Type";"Value";"Min";"Max";"Average";"# Changes";"Min. Change";"Max. Change"], ColWidths=[320;100;110;102;100;110;102;118;118]
+TableHeader="Source Files", SortCol="File", SortOrder="ASCENDING", VisibleCols=["File";"Status";"Size";"#Insts";"Path"], ColWidths=[229;100;100;100;917]
+TableHeader="Data Sampling Table", SortCol="None", SortOrder="ASCENDING", VisibleCols=["Index";"Time";" (QEKF_INS).Roll";" (BMI088).Temperature";" (QEKF_INS).Pitch"], ColWidths=[100;100;100;100;100]
+TableHeader="Data Sampling Setup", SortCol="Expression", SortOrder="ASCENDING", VisibleCols=["Expression";"Type";"Value";"Min";"Max";"Average";"# Changes";"Min. Change";"Max. Change"], ColWidths=[320;100;100;100;100;100;100;102;102]
 TableHeader="Power Sampling", SortCol="Index", SortOrder="ASCENDING", VisibleCols=["Index";"Time";"Ch 0"], ColWidths=[100;100;100]
-TableHeader="Registers 1", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Description"], ColWidths=[100;105;294]
-TableHeader="Watched Data 1", SortCol="Expression", SortOrder="ASCENDING", VisibleCols=["Expression";"Value";"Type";"Location";"Refresh"], ColWidths=[171;101;162;112;117]
+TableHeader="Registers 1", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Description"], ColWidths=[100;105;259]
+TableHeader="Watched Data 1", SortCol="Expression", SortOrder="ASCENDING", VisibleCols=["Expression";"Value";"Type";"Location";"Refresh"], ColWidths=[171;101;162;112;100]
 TableHeader="RegisterSelectionDialog", SortCol="None", SortOrder="ASCENDING", VisibleCols=[], ColWidths=[]
-TableHeader="Call Graph", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Stack Total";"Stack Local";"Code Total";"Code Local";"Depth";"Called From"], ColWidths=[384;100;100;100;100;100;118]
 TableHeader="Call Stack", SortCol="Function", SortOrder="ASCENDING", VisibleCols=["Function";"Stack Frame";"Source";"PC";"Return Address";"Stack Used"], ColWidths=[110;126;190;100;190;100]
-TableHeader="TargetExceptionDialog", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Address";"Description"], ColWidths=[27;27;27;38]
+TableHeader="TargetExceptionDialog", SortCol="Name", SortOrder="ASCENDING", VisibleCols=["Name";"Value";"Address";"Description"], ColWidths=[27;27;27;32]
 WatchedExpression="QEKF_INS", RefreshRate=2, Window=Watched Data 1
 WatchedExpression="BMI088", RefreshRate=2, Window=Watched Data 1
 WatchedExpression="RobotMode_t", Window=Watched Data 1